TH48-E70 Oilfield Transmission
Your operation depends on the power driving it. And your transmission is as crucial to your power solution as the engine. Cat transmissions are proven in the oil and gas industry and widely known for their exceptional power, leading durability, ease of operation, and shifting options.Ideal applications for Cat TH48-E70 transmissions include pressure pumping, kill mud pumps, coil tubing pump support, nitrogen units, and acidizing units. TH48-E70 transmissions are optimized for use with Cat C27 ACERT and C32 ACERT, as well as Cummins QST30 engines.Cat transmissions are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat TH48-E70 oilfield transmission. Gross input power: 1118 bkW (1500 bhp).
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
Dimensions
-
Width34.0 in
-
Height43.0 in
-
weight3735.0 lb
-
Length66.0 in
-
Width34 in
-
Height43 in
-
Weight3735 lb
-
Length66 in
Transmission Specifications
-
Gross Input Power1200 BHP
-
Gross Peak Input Torque4422 ft-lb
-
Rated Input Speed2100 r/min
-
Maximum Turbine Torque7442 ft-lb
-
Gear TypeStraight spur planetary
-
Gears7F/0R
-
1F Gear Ratio6.16
-
2F Gear Ratio4.52
-
3F Gear Ratio3.33
-
4F Gear Ratio2.47
-
5F Gear Ratio1.82
-
6F Gear Ratio1.36
-
7F Gear Ratio1.00
-
7F Gear Ratio1.00
Standard Equipment:
-
- Cat Engines For Optimized Power Train
-
- Cat C27 ACERT
- Cat C32 ACERT
- Cummins QST30 (950-1500 bhp ratings)
-
- Transmission Rotation
-
- Input rotation — counterclockwise
- Output rotation — counterclockwise(as viewed from rear)
-
- Torque Converter
-
- Integral torque converter
- Series
- Stall torque ratio
-
- Clutches
-
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
-
- Installation Connections
-
- 2 oil cooler lines
- 1 electrical connector
- 1 pump
-
- Oil System
-
- Cat Transmission/Drive Train Oil-4 (TDTO)
- Sump oil temperatures
- Hydraulic fill capacity — Approx. 114 L (30 gal), subject to cooler size, lines, and installation.
- Filter Type — 6 micron synthetic, cartridge remote mount
-
- Mountings
-
- Input connection (flywheel) — SAE #0
- Output connections (yoke) — GWB 390.60/GWB 390.65
- Structural application subject to Caterpillar approval
-
- Control System
-
- Electronic Control Unit (ECU)
- Electronic data link, SAE J1939
- Electrical system 24V
-
- Power Take-off Drives
-
- Location
- Mounting type: SAE 8 bolt (J704)
- Rated power