Your Rental Location
  • Request A Quote

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Videos not available for this product.

360 View not available for this product.

Add to Cart
SPECIFICATION SUMMARY
  • Minimum Rating 219 ekW
  • Maximum Rating 940 ekW
  • Frequency 60hz
  • Rated Engine Speed 1800 rpm

PRICE (USD)
Call 440-838-7348 for rate information

Generator Set Specifications

  • Minimum Rating
    219 ekW
  • Maximum Rating
    940 ekW
  • Frequency
    60hz
  • Minimum Rating
    219 ekW
  • Maximum Rating
    940 ekW
  • Frequency
    60hz

Engine Specifications

  • Rated Engine Speed
    1800 rpm
  • Emissions
    U.S. EPA Tier 3 / IMO II emissions certified
  • Configuration
    Vee-12, 4-stroke-Cycle-Diesel
  • Aspiration
    Turbocharged-aftercooled aspiration
  • Bore
    5.71 in
  • Stroke
    6.38 in
  • Displacement
    1959.0 cu in
  • Governor
    Electronic (A4 ECM)
  • Refill Capacity
    Lube Oil System w/ oil filter change: 146 L (38.5 gal)
  • Oil Change Interval
    750 hrs
  • Cooling
    Heat exchanger, keel or radiator cooled
  • Generator
    SR5 - Form Wound
  • Rated Engine Speed
    1800 rpm
  • Configuration
    Vee-12, 4-stroke-Cycle-Diesel
  • Aspiration
    Turbocharged-aftercooled aspiration
  • Bore
    5.71 in
  • Stroke
    6.38 in
  • Displacement
    1959 in³
  • Governor
    Electronic (A4 ECM)
  • Emissions
    U.S. EPA Tier 3 / IMO II emissions certified
  • Cooling
    Heat exchanger, keel or radiator cooled
  • Oil Change Interval
    750 hrs
  • Refill Capacity
    Lube Oil System w/ oil filter change: 146 L (38.5 gal)

Generator Set Dimensions

  • Package Dry Weight
    15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
  • Length
    167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
  • Width
    59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
  • Height
    70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
  • Package Dry Weight
    15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Standard Equipment:

  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger, keel or radiator cooled
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Fuel System
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • Generators And Generator Attachments
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • Lube System
    • Oil fill, simplex filter and dipstick
  • Mounting System
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment:

  • Air Inlet System
    • Closed crankcase ventilation
  • Alarm And Protection
    • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
    • IP44 generator protection
  • Exhaust System
    • Muffler
    • SOLAS approved spray shielding
  • Charging System
    • Charging alternator
  • Control System
    • EMCP 4.2 control panel
  • Fuel System
    • Installed primary fuel filter with water separator and manual or electric priming pump
    • Fuel cooler
  • Lube System
    • Duplex oil filters
  • Starting System
    • Starting motors – air, electric or dual