Cat C32 Generator Set (IMO III)
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
PRICE (USD)
Call 440-838-7348 for rate information
Generator Set Specifications
-
Minimum Rating219 ekW
-
Maximum Rating940 ekW
-
Frequency60hz
-
Minimum Rating219 ekW
-
Maximum Rating940 ekW
-
Frequency60hz
Engine Specifications
-
Rated Engine Speed1500 rpm
-
EmissionsIMO III emissions certified (SCR required)
-
ConfigurationVee-12, 4-stroke-Cycle-Diesel
-
AspirationTurbocharged-aftercooled aspiration
-
Bore5.71 in
-
Stroke6.38 in
-
Displacement1959.0 cu in
-
GovernorElectronic (A5 ECM)
-
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)
-
Oil Change Interval750 hrs
-
CoolingHeat exchanger, keel or radiator cooled
-
GeneratorSR5 - Form Wound
-
Rated Engine Speed1500 rpm
-
ConfigurationVee-12, 4-stroke-Cycle-Diesel
-
AspirationTurbocharged-aftercooled aspiration
-
Bore5.71 in
-
Stroke6.38 in
-
Displacement1959 in³
-
GovernorElectronic (A5 ECM)
-
EmissionsIMO III emissions certified (SCR required)
-
CoolingHeat exchanger, keel or radiator cooled
-
Oil Change Interval750 hrs
-
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)
Generator Set Dimensions
-
Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
-
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
-
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
-
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
-
Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
Emissions
Utilizes SCR Technology to enable IMO III emission regulations compliance while lowering operational costs
Control Strategy
Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs; Extends emissions useful life; Ensures compliance; Flexible to urea quality
Fuel System
Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology
Power Reserve
Industry leading power reserve
Certifications
Wide range of available Marine Society certifications
Warranty
Industry-leading warranty coverage for factory packaged components
Service
Global dealer network for service in any location
Standard Equipment:
-
- Air Inlet System
-
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
-
- Control System
-
- 24V control system
-
- Cooling System
-
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
-
- Fuel System
-
- Primary fuel filter with water separator installed on base frame
- Duplex fuel filters with hybrid fuel lines
-
- Generators And Generator Attachments
-
- IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
-
- Lube System
-
- Oil fill, simplex filter and dipstick
-
- Mounting System
-
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
-
- General
-
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment:
-
- Alarm And Protection
-
- MGCPIIIB control panel with Cat® Alarm and Protection System
- IP44 generator protection
-
- Exhaust System
-
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
-
- Charging System
-
- Charging alternator
-
- Fuel System
-
- Manual or electric fuel priming pump
- Fuel cooler
-
- Lube System
-
- Duplex oil filters
-
- Starting System
-
- Starting motors – air, electric or redundant