Your Rental Location
  • Request A Quote

Cat C280-8 Marine Generator Set

Videos not available for this product.

360 View not available for this product.

Add to Cart
SPECIFICATION SUMMARY
  • Minimum Rating 2350 ekW (2938 kVA)
  • Maximum Rating 2420 ekW (3025 kVA)
  • Frequency 50 Hz or 60 Hz
  • Speed 1000 rpm (50 hz) or 900 rpm (60 hz)

PRICE (USD)
Call 440-838-7348 for rate information

Generator Set Specifications

  • Minimum Rating
    2350 ekW (2938 kVA)
  • Maximum Rating
    2420 ekW (3025 kVA)
  • Frequency
    50 Hz or 60 Hz
  • Speed
    1000 rpm (50 hz) or 900 rpm (60 hz)
  • Minimum Rating
    2350 ekW (2938 kVA)
  • Maximum Rating
    2420 ekW (3025 kVA)
  • Frequency
    50 Hz or 60 Hz
  • Speed
    1000 rpm (50 hz) or 900 rpm (60 hz)
  • Emissions/Fuel Strategy
    EPA Tier 2, IMO II

Generator Set Configurations

  • Emissions/Fuel Strategy
    EPA Tier 2, IMO II

Engine Specifications

  • Engine Model
    In-line 8, 4-Stroke-Cycle Diesel
  • Aspiration
    Turbocharged-Aftercooled
  • Bore
    11.0 in
  • Stroke
    11.8 in
  • Displacement
    9031.0 in3
  • Governor Type
    Electronic
  • Fuel System
    EUI
  • Compression Ratio 50 Hz
    13.1
  • Compression Ratio 60 Hz
    13:1
  • Aspiration
    Turbocharged-Aftercooled
  • Bore
    11 in
  • Stroke
    11.8 in
  • Displacement
    9031 in³
  • Governor Type
    Electronic
  • Engine Model
    In-line 8, 4-Stroke-Cycle Diesel

Generator Set Dimensions

  • Length
    316.5 in
  • Width
    77.2 in
  • Height
    155.0 in
  • Weight (Estimated)
    25000.0 lb
  • Length
    316.5 in
  • Width
    77.2 in
  • Height
    155 in
  • Weight - Estimated
    25000 lb

A3 ECU

Customer Interface Panel

Electronic Unit Injectors

Standard Equipment:

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Optional Equipment:

was successfully added to the cart! Request Quote