Your Rental Location
  • Request A Quote

C18 (SRMP) Marine Generator Set

The C18 SRMP is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Minimum Rating 260 ekW (325 kVA)
  • Maximum Rating 565 ekW (706 kVA)
  • Frequency 50 hz
  • Speed 50 Hz - 1500 rpm, 60 Hz - 1800 rpm

PRICE (USD)
Call 440-838-7348 for rate information

Generator Set Specifications

  • Minimum Rating
    260 ekW (325 kVA)
  • Maximum Rating
    565 ekW (706 kVA)
  • Frequency
    50 hz
  • Speed
    50 Hz - 1500 rpm, 60 Hz - 1800 rpm
  • Minimum Rating
    260 ekW (325 kVA)
  • Maximum Rating
    565 ekW (706 kVA)
  • Frequency
    50 hz
  • Speed
    50 Hz - 1500 rpm, 60 Hz - 1800 rpm

Engine Specifications

  • Configuration
    In-line 6, 4-Stroke-Cycle Diesel
  • Aspiration
    Turbocharged - aftercooled
  • Bore
    5.7 in
  • Stroke
    7.2 in
  • Fuel System
    MEUI
  • Configuration
    In-line 6, 4-Stroke-Cycle Diesel
  • Aspiration
    Turbocharged - aftercooled
  • Bore
    5.7 in
  • Stroke
    7.2 in

Generator Set Dimensions (Keel and Hex Cooled)

  • Length
    119.6 in
  • Height
    64.9 in

Generator Set Dimensions (Radiator Cooled)

  • Length
    55.6 in
  • Height
    94.8 in

Generator Set Configurations

  • Emissions
    EPA Tier 3, IMO II, EU IW

Generator Specifications

  • Excitation
    SRMP
  • Insulation
    Class H
  • IP Rating
    IP23 (standard), IP 44 (optional)
  • Voltage Regulator
    CDVR (Digital Voltage)

Generator Set Dimensions - Keel and Hex Cooled

  • Width
    55.6 in
  • Weight - Approximate
    9747 lb
  • Height
    64.9 in
  • Length
    119.6 in

Generator Set Dimensions - Radiator Cooled

  • Width
    66.9 in
  • Weight - Approximate
    13396 lb
  • Height
    94.8 in
  • Length
    55.6 in

Separate circuit aftercooling system

The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler

Emissions

EPA Tier 3 compliant, IMO II and EU IWW compliant

Cooling system

Heat exchanger and Keel cooled options for all ratings

Turbo Configurations

Single turbo configurations for all ratings

Competitive size and weight

Marine Certifications

All major MCS type approvals available from factory

Standard Equipment:

  • Air Inlet System
    • Separate circuit after-cooled (SCAC)
    • Heavy-duty inlet air filter
  • Cooling System
    • SCAC pump, gear driven, for HEX cooled engines only
    • Jacket water pump, gear driven
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Exhaust System
    • Water-cooled exhaust manifold & turbocharger
    • Round flanged exhaust outlet
  • Fuel System
    • Hybrid fuel lines
    • MEUI fuel system
    • Fuel filter, front service
    • Fuel transfer and priming pumps
  • Lube System
    • Center sump oil pan, deep
    • Front and top service oil filler locations
    • Front service dipstick
  • Mounting System
    • Vibration Isolators
    • Formed C-channel rails
  • Control System
    • Electronic fuel/air ratio control
    • SRMP permanent magnet 12-lead generator
    • Digital voltage regulator
    • Class H insulation, Class F temperature rise, IP23 protection

Optional Equipment:

  • Exhaust System
    • Dry Elbows
    • Water-Cooled Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler, Spark Arresting
    • Fumes disposal (closed system)
  • Air Inlet System
    • Air Inlet Adapter
  • Charging System
    • Battery Chargers 10 amp
    • Battery sets: 24V 950-1300 CCA
    • Charging alternator 24V 105 amp
  • Control System
    • Caterpillar alarm and protection
    • EMCP 4.2 control panel
    • MGCP III B control panel
  • Fuel System
    • Duplex fuel filter – front service
    • Fuel cooler
    • Primary fuel/water separator
  • Instrumentation
    • Generator service side - LH, RH
    • Generator terminal box extension
    • Load sharing module (option for type approved module)
  • Lube System
    • Spare pump kits
    • Duplex oil filter – front service
    • Manual sump pump
  • Mounting System
    • Vibration Isolators
  • Protection System
    • Generator protection - IP44
  • Starting System
    • Starting motors - electric and/or air
    • Jacket water heaters