Your Rental Location
  • Request A Quote

C18 ACERT Tier 4 Interim / EU Stage IIIB

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Interim or EU Stage IIIB emissions certifications in land mechanical drilling applications such as mud pump drives. Cat C18 ACERT™ Industrial Diesel Engine. Ratings: 447-522 bkW (600-700 bhp)@ 1800-1900 rpm meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards. Rating 563 bkW (755 bhp) @ 1800-1900 rpm meets U.S. EPA Tier 4 Interim emission standards.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Minimum Rating 600.0 bhp
  • Maximum Rating 755.0 bhp
  • Emissions U.S. EPA Tier 4 Interim, EU Stage IIIB
  • Rated Speed 1900.0 RPM

PRICE (USD)
Call 440-838-7348 for rate information

Engine Specifications

  • Minimum Rating
    600.0 bhp
  • Maximum Rating
    755.0 bhp
  • Emissions
    U.S. EPA Tier 4 Interim, EU Stage IIIB
  • Rated Speed
    1900.0 RPM
  • Bore
    5.7 in
  • Stroke
    7.2 in
  • Displacement
    1104.5 in3
  • Aspiration
    Turbocharged-Aftercooled
  • Engine Weight, net dry
    3482.0 lb
  • Rotation (from flywheel end)
    Counterclockwise
  • Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
  • Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
  • Governor and Protection
    ADEM A4
  • Minimum Rating
    600 BHP
  • Maximum Rating
    755 BHP
  • Emissions
    U.S. EPA Tier 4 Interim, EU Stage IIIB
  • Rated Speed
    1900 r/min
  • Bore
    5.7 in
  • Stroke
    7.2 in
  • Displacement
    1104.5 in³
  • Aspiration
    Turbocharged-Aftercooled
  • Engine Weight - Net Dry
    3482 lb
  • Rotation from Flywheel End
    Counterclockwise
  • Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
  • Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)

Dimensions

  • Length
    60.2 in
  • Width
    37.8 in
  • Height
    3482.0 in
  • Length
    60.2 in
  • Width
    37.8 in
  • Height
    3482 in

Capacity for Liquids

  • Maximum Cooling System - Engine Only
    7.1 gal (US)

Features

Standard Equipment:

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, and center)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment: