Your Rental Location
  • Request A Quote

Cat® C6.6 Diesel Engine

Cat® C6.6 Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by C6.6 The Cat® C6.6 Industrial Diesel Engine is offered in ratings ranging from 89-129.4 bkW (119.3-173.5 bhp) @ 2200 rpm. These ratings met U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIB Equivalent emission standards. Industries and applications powered by C6.6 engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers and Underground Mining Equipment.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
  • Cooling System Capacity 13.7 L (14.5 qt)
  • Lube System (refill) 13-16 L (13.7-16.9 qt)
  • Length 1063.7 mm (41.9 in)

PRICE (USD)
Call 440-838-7348 for rate information

General

  • Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
  • Cooling System Capacity
    13.7 L (14.5 qt)
  • Lube System (refill)
    13-16 L (13.7-16.9 qt)
  • Bore
    4.1 in
  • Stroke
    5 in
  • Displacement
    402.8 in³
  • Aspiration
    Turbocharged Aftercooled (TA)
  • Compression Ratio
    16.5:1
  • Combustion System
    Direct Injection
  • Rotation from Flywheel End
    Counterclockwise
  • Engine Configuration
    Inline 6
  • Bore
    105.0 mm (4.13 in)
  • Stroke
    127 mm (5.00 in)
  • Displacement
    6.6 L (402.8 in³)
  • Cooling System - Capacity
    13.7 L (14.5 qt)
  • Lube System - Refill
    13-16 L (13.7-16.9 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    1063.7 mm (41.9 in)
  • Width
    753 mm (29.6 in)
  • Height
    907 mm (35.7 in)
  • Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    695 kg (1532 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    852.7 mm (33.6 in)
  • Width
    364.6 mm (14.35 in)
  • Height
    352 mm (13.9 in)
  • Weight
    40 kg (88.1 lb)
  • Diameter
    283 mm (11.1 in)

Power Rating

  • Minimum Power
    119.3 HP
  • Maximum Power
    173.5 HP
  • Rated Speed
    2200 rpm

Emission Standards

  • Emissions
    U.S. EPA Tier 4 Interim Equivalent

Engine Dimensions - Approximate

  • Height
    907 mm (35.7 in)
  • Length
    1063.7 mm (41.9 in)
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    695 kg (1532 lb)
  • Width
    753 mm (29.6 in)
  • Length
    41.9 in
  • Width
    29.6 in
  • Height
    35.7 in

Aftertreatment Dimensions - Approximate

  • Diameter
    283 mm (11.1 in)
  • Height
    352 mm (13.9 in)
  • Length
    852.7 mm (33.6 in)
  • Weight
    40 kg (88.1 lb)
  • Width
    364.6 mm (14.35 in)

Aftertreatment Dimensions

  • Height
    13.9 in
  • Diameter
    11.1 in
  • Length
    33.6 in
  • Weight
    88.1 lb

Reliable, Quiet and Durable Power

World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.

High Performance

Turbocharger with smart wastegate available on some ratings for fast response, high power, and increased torque.

Fuel Efficiency

Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.

Fuel & Oil

Tier 4 Interim or Tier 4 Final, Stage IIIB or Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 15 ppm sulfur, and new oil formulations to support the new technology. Cat® engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil.

Broad Application Range

Industry leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.

Package Size

Ideal for equipment with narrow engine compartments. Multiple installation options minimize total package size.

Low Cost Maintenance

Worldwide service delivers ease of maintenance and simplifies the servicing routine. Hydraulic tappets, multi-vee belts, "no ash service" aftertreatment, and 500-hour oil change intervals enable low-cost maintenance. Many service items have a choice of location on either side of the engine to enable choice of service access. The S·O·SSM program is available from your Cat dealer to determine oil change intervals and provide optimal performance.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.

World-class Product Support Offered Through Global Cat Dealer Network

  • Scheduled maintenance, including SOSSM sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

World-class Product Support Offered Through Global Cat Dealer Network

  • Scheduled maintenance, including SOSSM sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

Tier 4 Interim, Stage IIIB Aftertreatment Features

Regeneration. Passive regeneration completely transparent to the operator.


Mounting. Extensive range of inlets and outlets, as well as remote off- and on-engine installations, provide flexibility for many installations.


Service. Service-free DPF for the emissions life of the engine.


Standard Equipment:

  • Air Inlet System
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
  • Flywheels And Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
    • ACERT Technology
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off (pto)
    • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
  • U.s. Epa Tier 4 Interim Equivalent, Eu Stage Iiib Equivalent Aftertreatment / Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • 3" flex pipe connection kit with straight, 45°, and 90° options for flexibility

Optional Equipment: