Cat® C3.6 Diesel Engine
The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
- Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity 4 L (1.06 qt)
- DOC Length TBA
- DOC Weight TBA
General
-
Engine ConfigurationIn-Line 4, 4-Stroke-Cycle Diesel
-
Cooling System Capacity4 L (1.06 qt)
-
Bore3.9 in
-
Stroke4.7 in
-
Displacement220 in³
-
AspirationTurbocharged-Aftercooled (TA)
-
Compression Ratio17.0:1
-
Combustion SystemDirect Injection
-
Rotation from Flywheel EndCounterclockwise
-
Engine ConfigurationIn-Line 4
-
Bore98 mm (3.9 in)
-
Stroke120 mm (4.7 in)
-
Displacement3.6 L (220 in³)
-
Cooling System - Capacity4 L (1.06 qt)
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
-
DOC LengthTBA
-
DOC WeightTBA
-
DOC DiameterTBA
-
SCR WeightTBA
-
SCR DiameterTBA
Power Rating
-
Minimum Power74 HP
-
Maximum Power134 HP
-
Rated Speed2000-2400 rpm
-
Maximum Torque406 lb-ft @ 1500 rpm
Emission Standards
-
EmissionsU.S. EPA & CARB Tier 4 Final, EU Stage V
Engine Dimensions - Approximate
-
Length26.3 in
-
Dry Weight - Basic Operating Engine Without Optional Attachments381 kg (840 lbs)
-
Height787 mm (30.98 in)
-
Length667 mm (26.3 in)
-
Width564 mm (22.2 in)
-
Weight - Net Dry - Basic Operating Engine Without Optional Attachments840 lb
-
Width22.2 in
-
Height31 in
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
Length667 mm (26.3 in)
-
Width569 mm (22.4 in)
-
Height776 mm (30.6 in)
Aftertreatment Dimensions - Approximate
-
SCR LengthTBA
-
SCR WeightTBA
-
DOC DiameterTBA
-
DOC LengthTBA
-
DOC WeightTBA
-
SCR DiameterTBA
Installation
Smaller in size than it's predecessor, the Cat C3.6 is a powerful engine in a compact and easily integrated size that saves OEMs valuable time and costs. With flexible aftertreatment mounting options and a simplfied engine installation process, the C3.6 can be placed into a wide variety of applications with agility and speed.
Advanced Features
What would you do with 5% more power density and 12% more torque? The C3.6 uses the latest in technology to bring OEMs the most efficient and powerful engine—even at peak performance—when compared to the previous engine model.
Ideal Applications
Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors • Telehandlers •
Total Cost of Ownership
Owning and operating equipment is a big investment, so it only makes sense to get the most you can from it. Thanks to the chosen technologies of the Cat C3.6, owners can experience an overall savings in fluid.
Cat Dealer Product Support
Backed by a five-year warranty, the Cat C3.6 is also supported by Caterpillar's unmatched Dealer Support Network with over 171 locations in 192 countries across the world—so the expert assistance you need is always close by.
Safety
Safety on the job site matters. The Cat C3.6 is 3 decibles quieter output than the previous engine equivalent, meaning less noise from the engine and a more alert and attentive operator.
Standard Equipment:
-
- Control System
-
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
-
- Flywheels And Flywheel Housing
-
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
-
- Fuel System
-
- Fuel filter – preconnected but chassis mounted
- With water sensor
-
- Lube System
-
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
-
- General
-
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
-
- U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
-
- Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries