Your Rental Location
  • Request A Quote

Cat® C15 Industrial Power Unit

The Cat® C15 Industrial Power Unit is offered in ratings ranging from 354-433 bkW (475-580 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Minimum Power 475.0 bhp
  • Maximum Power 580.0 bhp
  • Emissions U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
  • Rated Speed 1800-2100 rpm

PRICE (USD)
Call 440-838-7348 for rate information

Power Rating

  • Minimum Power
    475.0 bhp
  • Maximum Power
    580.0 bhp
  • Rated Speed
    1800-2100 rpm
  • Minimum Power
    475 HP
  • Maximum Power
    580 HP
  • Rated Speed
    1800-2100 rpm

Emission Standards

  • Emissions
    U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
  • Emissions
    U.S. EPA Tier 4 Final, EU Stage V

General

  • Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
  • Bore
    137 mm (5.39 in)
  • Stroke
    171 mm (6.73 in)
  • Displacement
    15.2 L (927.6 in³)
  • Aspiration
    Turbocharged Aftercooled (TA)
  • Compression Ratio
    17:1
  • Rotation (from flywheel end)
    Counterclockwise
  • Cooling System Capacity
    26.9 L (28.4 qt)
  • Lube System (refill)
    38-72 L (40-76 qt)
  • Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
  • Bore
    137 mm (5.39 in)
  • Stroke
    171 mm (6.73 in)
  • Displacement
    15.2 L (927.6 in³)
  • Aspiration
    Turbocharged Aftercooled (TA)
  • Compression Ratio
    17.0:1
  • Rotation from Flywheel End
    Counterclockwise
  • Cooling System - Capacity
    26.9 L (28.4 qt)
  • Lube System - Refill
    38-72 L (40-76 qt)
  • Bore
    5.4 in
  • Stroke
    6.7 in
  • Displacement
    927.6 in³

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

  • Diameter
    330.2-355.6 mm (13-14 in)
  • Weight
    180-268 kg (397-590.8 lb)

Power Unit Dimensions - Approximate

  • Length
    2172-2488 mm (85.5-98 in)
  • Width
    1180-1229 mm (46.5-48.4 in)
  • Height
    1912-2006 mm (75.3-79 in)
  • Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    2113-2650 kg (4658-5842 lb)

Aftertreatment Dimensions - Approximate

  • Diameter
    330.2-355.6 mm (13-14 in)
  • Width
    779.8-1112 mm (30.7-43.8in)
  • Height
    451.3-654 mm (17.8-25.7 in)
  • Weight
    180-268 kg (397-590.8 lb)

PETU Dimensions - Tier 4 Final, Stage IV Only

  • Volume Capacity
    48.4 L (51.1 qt)
  • Length
    854 mm (33.6 in)
  • Width
    287 mm (11.3 in)
  • Height
    551 mm (21.7 in)
  • Weight
    19.42 kg (42.8 lb)

PETU Dimensions - Tier 4 Final Only

  • Volume Capacity
    51.1 qt (US)

Aftertreatment Dimensions

  • Weight
    591 lb
  • Diameter
    14 in

Reliable, Quiet and Durable Power

World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.

High Performance

Simple and efficient turbocharger with balance valve provides optimal air management and improved fuel efficiency.

Fuel Efficiency

Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.

Fuel & Oil

Tier 4 Interim or Tier 4 Final, Stage IIIB or Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 10 ppm sulfur (EU) and 15 ppm sulfur (U.S.), and new oil formulations to support the new technology. Cat® engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil.

Broad Application Range

Industry leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.

World-class Product Support Offered Through Global Cat Dealer Network

  • Scheduled maintenance, including SOSSM sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

Standard Equipment:

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (pto)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment/ Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems

Optional Equipment: