Cat® C1.5 Industrial Power Unit
The Cat® C1.5 Industrial Power Unit is offered in the following rating: 24.2 bkW (32.5 bhp) @ 3000 rpm. This rating meets U.S. EPA Tier 4 Interim equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
- Minimum Rating 32.5 bhp
- Maximum Rating 32.5 bhp
- Emissions U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent
- Rated Speed 3000 rpm
Power Rating
-
Minimum Rating32.5 bhp
-
Maximum Rating32.5 bhp
-
Rated Speed3000 rpm
-
Minimum Rating32.5 BHP
-
Maximum Rating32.5 BHP
-
Rated Speed3000 rpm
-
Maximum Power32.5 HP
-
Maximum Torque69.6 lb-ft @ 1800 rpm
-
Minimum Power32.5 HP
-
Maximum Power32.5 HP
-
Maximum Torque69.6 lb-ft @ 1800 rpm
-
Rated Speed3000 rpm
-
Minimum Power32.5 HP
Emission Standards
-
EmissionsU.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent
-
EmissionsU.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent
-
EmissionsU.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent
General
-
Engine ConfigurationInline 3, 4-Stroke-Cycle Diesel
-
Bore84 mm (3.3 in)
-
Stroke90 mm (3.5 in)
-
Displacement1.496 L (91 in³)
-
AspirationNaturally Aspirated (NA)
-
Compression Ratio22.5:1
-
Rotation (from flywheel end)Counterclockwise
-
Cooling System Capacity5.98 L (6.3 qt)
-
Lube System (refill)6 L (6.3 qt)
-
Engine ConfigurationInline 3, 4-Stroke-Cycle Diesel
-
Bore84 mm (3.3 in)
-
Stroke90 mm (3.5 in)
-
Displacement1.496 L (91 in³)
-
AspirationNaturally Aspirated (NA)
-
Compression Ratio22.5:1
-
Rotation from Flywheel EndCounterclockwise
-
Cooling System - Capacity5.98 L (6.3 qt)
-
Lube System - Refill6 L (6.3 qt)
-
Bore3.3 in
-
Stroke3.5 in
-
Displacement91 in³
-
Engine ConfigurationInline 3, 4-Stroke-Cycle Diesel
-
Bore3.3 in
-
Stroke3.5 in
-
Displacement91 in³
-
Compression Ratio22.5:1
-
AspirationNaturally Aspirated (NA)
-
Rotation from Flywheel EndCounterclockwise
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
-
Length820 mm (32.3 in)
-
Width497 mm (19.6 in)
-
Height793 mm (31.2 in)
Power Unit Dimensions - Approximate
-
Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C175 kg (385.8 lb)
-
Width497 mm (19.6 in)
-
Height793 mm (31.2 in)
-
Length820 mm (32.3 in)
Power Unit Dimensions
-
Weight386 lb
-
Weight386 lb
Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
Fuel Efficiency
Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.
Broad Application Range
Industry leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.
Quality
Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.
World-class Product Support Offered Through Global Cat Dealer Network
- Scheduled maintenance, including SOSSM sample
- Customer Support Agreements (CSA)
- Caterpillar Extended Service Coverage (ESC)
- Superior dealer service network
- Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold
-
- Control System
-
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted air cleaner
- Mounted radiator and fan
-
- Flywheel & Flywheel Housing
-
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- Power Take Off (pto)
-
- Provision for timing case rear facing PTO
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request