G3520H Gas Generator
G3520H Gas Generator
360 View not available for this product.
SPECIFICATION SUMMARY
- Maximum Electrical Efficiency 45.4%
- Engine Model G3520H
- Maximum Continuous Rating 2519 / 2500 ekW @ 1.0pf
- Fuel Type Natural Gas
PRICE (USD)
Call 440-838-7348 for rate information
Gas Generator Sets Specification
-
Maximum Electrical Efficiency45.4%
Engine Specification
-
Engine ModelG3520H
Generator Set Specifications
-
Maximum Continuous Rating2519 / 2500 ekW @ 1.0pf
-
Fuel TypeNatural Gas
-
Frequency50 / 60 Hz
-
RPM1500
-
Frequency50/60 Hz
-
Maximum Electrical Efficiency45.30%
Engine Specifications
-
Bore6.7 in
-
Stroke8.5 in
-
Displacement5956 in³
-
AspirationTA
-
Compression Ratio12.1
-
Engine ModelG3520H
Generator Set Dimensions
-
Length302 in
-
Width86 in
-
Height97 in
-
Dry Weight - Genset54675 lb
Generator Set Configurations
-
Emissions/Fuel StrategyU.S. EPA Stationary Emergency Certified
Cat G3520H Gas Engine
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
SR5 Generator
- Designed to match performance and output characteristics of Caterpillar gas engines
- Industry leading mechanical and electrical design
- High efficiency
EMCP 4.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cat electronic control system
- Simple user friendly interface and navigation
- Digital monitoring, metering and protection setting
- Fully-featured power metering and protective relaying
- Remote control and monitor capability options
Emissions
- Meets most worldwide emissions requirements down to 0.5 g/bhp-hr Nox level without aftertreatment
Proven System
- Field proven in a wide range of applications worldwide
- Fully prototype tested
- Certified torsional vibration analysis available
Full Range of Attachments
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment:
-
- Control Panel
-
- EMCP 4.3
-
- Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
- Cooling
-
- Engine driven water pumps for jacket water and aftercooler
- Jacket water and SCAC thermostats
- ANSI/DN customer flange connections for JW inlet and outlet
-
- Circuit Breaker
-
- LSI Long-Time, Short-Time, Instantaneous Annunciator
- Rear-mounted
- 5000A 3-Pole IEC Rated Circuit Breakers
-
- Exhaust
-
- Center section cooled turbocharger with Cat flanged outlet
- Dry exhaust manifolds, insulated and shielded
- Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
-
- Fuel System
-
- Electronic fuel metering valve
- Throttle plate, 24V DC actuator, controlled by GECM
-
- Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
-
- Ignition System
-
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
-
- Generator
-
- Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
- SR4B
- Crankshaft Vibration Damper and Guard
- Busbar connections
- Paint- Caterpillar Yellow except rails gloss black
- Winding temperature detectors
- Operation and maintenance manuals
- Parts book
- Anti-condensation space heater
- RH Service
- SR5
- Reactive droop
-
- Govrerning System
-
- ADEM A4 4-20mA (0-5VV) Speed Input
Optional Equipment:
-
- Air Inlet
-
- Mounting Brackets and Piping
- Air cleaner with precleaner
-
- Circuit Breaker
-
- MP- Frame 6 Pole Bottom Cable Entry
- 4000/5000A Neutral Current Transformer Automatic Selection
- No UV trip or package mounted CB Wiring
- Frame Mounting
-
- Control Panel
-
- 16 Point/32 Light Annunciator, Shipped Loose
- Remote Communications Module (PL1000T, PL1000E)
- Remote annuciator
- Local PC Monitorring
- Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay
- Cat Connect: Ehternet, Satellite, Cell Telematics
- Engine failure relay
- Local alarm module
- Synchronizing module
- Remote PC Monitorring
-
- Cooling
-
- Inlet/Outlet connections
- Coolant level drain line with valves, fan with guard
-
- Exhaust
-
- Muffler and spark-arresting muffler with companion flanges
- Flange
- Elbow
- Flexible Fitting
- Exhaust Expander
-
- Fuel System
-
- Gas Knockdown Regulator
- Fuel filter
- Gas pressure regulator
- Gas shutoff valve 24V, ETR (Energized-To-Run)
-
- Generator
-
- Bearing temperature detectors
- Cable access box
- Low voltage extension box
- Manual voltage control
- European bus bar
- Generator air filter
- Medium and high voltage generators and attachment
-
- General
-
- Digital diagnostic tool
- Special paint order
- Tool set
- US AID Emblem
-
- Starting/charging
-
- Battery with cables and rack (shipped loose)
- 60A, 24V charging alternator (requires engine driven pumps)
- 24V starting motors
- Jacket water heater