Your Rental Location
  • Request A Quote

Energy Time Shift (ETS) module

The Cat® Energy Time Shift (ETS) module is a scalable, rapidly deployable energy storage system. The energy storage system integrates with solar or other renewable sources to store energy for use when the renewable source is not available. This systems provide temporary backup power to facilities in the event of a power outage.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Application Peak Shaving
  • Energy Storage 1518-9100 kWh
  • Rated Power 570-1000 kW
  • Module Type Energy Time Shift

PRICE (USD)
Call 440-838-7348 for rate information

Technical Summary

  • Application
    Peak Shaving
  • Energy Storage
    1518-9100 kWh
  • Rated Power
    570-1000 kW
  • Module Type
    Energy Time Shift

Reliable and Scalable

Factory prepackaged and tested

  • Pre-engineered containers shipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
  • Parallel ready - Multiple energy storage modules may be operated in parallel to provide increased power output and/or increase the battery kWh capacity from 30 minutes to nine (9) hours of capacity per energy storage system.

Renewable Integration

  • Designed to work with an array of renewable systems, including solar and wind
  • Integration with the Cat Microgrid Master Controller (MMC) allows for time-shifting of renewable energy for increased renewable content and full asset control allows smoothing of intermittent renewables.
  • The grid forming Cat Bi-Directional Power (BDP) inverter allows generator set(s) to be completely switched off, further reducing fuel consumption and operating costs.

Transient Assist

When used with a generator set, the Energy Storage System will provide reserve power capacity to:

  • Decrease the transient voltage and frequency dips resulting from the application of large loads.
  • Enables highly-efficient lean-burn gas gensets to operate in island mode.
  • And enables the shutdown of one or more gensets for fuel savings.

Grid Stabilization

  • Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

High Performance Inverter

  • Built-in controls for the charging and discharging of the energy storage equipment.
  • Static VAR compensator.
  • Four-quadrant output power factor control.
  • Aautomatic anti-islanding to meet UL 1741 and synchronization back to grid.

Applicable Standards and Certifications

UL Listed to the following standards (certification and mark pending):

  • UL 9540
  • UL 1741 SB
  • CSA C22.2 No. 107.1/16
  • cULus mark

Declarations (pending):

  • CE Declaration of conformity
  • IEC60204-1

Standard Equipment:

  • Energy Time Shift
    • Cat BDP bi-directional power inverter
    • Energy storage batteries
    • Color HMI touchscreen
    • Remote communications via Modbus TCP
    • HVAC system to maintain interior temperature
    • Liquid / Air cooling
    • Isolation Transformer
    • Convenience receptacles
    • Fire suppression system

Optional Equipment:

was successfully added to the cart! Request Quote