Your Rental Location
  • Request A Quote

CM43C (V-Type)

Caterpillar electric power stands for reliable energy supply. Especially during the energy system transformation, Cat generator sets close the energy gap caused by renewable energy source such as wind and photo voltaic. Short ramp up time, low operating costs and rapid maintenance times ensures a high availability according to the need of our customers. Combined heat /cool and power solutions allow our customers to maximize the efficiency and earnings paired with low emissions. Wherever power is needed around the globe, Caterpillar is able to support you with the best products and services to maximize your profit.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Minimum Rating 11170 kWe
  • Maximum Rating 14890 kWe
  • Emissions/Fuel Strategy (WB) Cert stage 1 and 2
  • Voltage 3000 to 13800 Volts

PRICE (USD)
Call 440-838-7348 for rate information

Generator Set Specifications

  • Minimum Rating
    11170 kWe
  • Maximum Rating
    14890 kWe
  • Emissions/Fuel Strategy
    (WB) Cert stage 1 and 2
  • Voltage
    3000 to 13800 Volts
  • Frequency At Speed
    50 Hz @ 500 / 60 Hz @ 514
  • Duty Cycle
    Prime, Continuous
  • Ready To Accept Loads (Preheated/Vented)
    40 s
  • Normal Ramp Up To 100% Load
    95 s
  • Emergency Ramp Up 10% To 100% Load
    35 s
  • Genset Efficiency Up To
    48.90%

Engine Specifications

  • Engine Model
    CM43C V-Type, 4-stroke-engine
  • Bore
    16.93 in
  • Stroke
    24.02 in
  • Aspiration
    Turbocharged-aftercooled
  • Engine Rating Range
    11400 - 15200 kW
  • Configuration
    12,16 cylinder
  • Fuel Type
    Diesel oil / heavy fuel oil (HFO) / crude oil
  • Swept Volume
    5406 in³
  • Mean Effective Pressure Up To
    374 psi
  • Specific Fuel Oil Consumption (WB I) Up To
    0.373 Ib/kWh
  • Specific Fuel Oil Consumption (WB II) Up To
    0.375 Ib/kWh
  • Specific Lube Oil Consumption
    0.001 Ib/kWh

Generator Set Dimensions

  • Length - Minimum
    562 in
  • Length - Maximum
    652 in
  • Width - Minimum
    162 in
  • Width - Maximum
    162 in
  • Height - Minimum
    183 in
  • Height - Maximum
    188 in
  • Dry Weight - Genset (minimum)
    500449 lb
  • Dry Weight - Genset (maximum)
    630521 lb

Reliable Operation

  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability

Control & Monitoring

  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system

Ease Of Installation

  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting

Ease Of Operation

  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available

Intelligent Simplicity

  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time

Ease Of Maintenance

  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls

Fuel

  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3

Emissions

  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available

Expertise & Experience

  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)

Standard Equipment:

  • Fuel System
    • Engine ventilation module (only dual fuel (DF) and gas)
    • Circulation module
    • Separator module
    • Ignition fuel oil module (only dual fuel (DF))
    • Gas valve unit (GVU) (only dual fuel (DF) and gas)
    • Pre-pressure module
  • Lubricating Oil System
    • Combined module: cooling water system and lube oil system
    • Piping interface module
    • Lube oil separator module
  • Cooling Water System
    • Piping interface module
    • Cooling water system with radiators
    • Combined module: see lube oil system
  • Starting System
    • Starting air compressor module
    • Starting air receiver module
  • Combustion Air System
    • Air filter - pocket
    • Air filter - oil bath
    • Air filter - pulse
  • Exhaust System
    • Selective catalytic reduction (SCR) system
    • Exhaust gas ventilation module (only dual fuel (DF) and gas)
    • Oxidation catalytic (Oxicat) converter system
    • Exhaust gas silencer
  • Control & Monitoring System
    • Gas leak detection per cylinder (only dual fuel (DF) and gas)
    • Engine monitoring package
    • Local data panel (LDP) / generator control panel (GCP)
    • Local control panel (LCP)
    • Motor control center module (MCC)
  • Mounting System
    • Elastic mounting - genset/engine

Optional Equipment:

was successfully added to the cart! Request Quote