C7.1 ACERT
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
- Minimum Rating 114 ekW
- Maximum Rating 200 ekW
- Emissions/Fuel Strategy U.S. EPA Cert,. Tier 3
- Voltage 208 to 480 Volts
PRICE (USD)
Call 440-838-7348 for rate information
Generator Set Specifications
-
Minimum Rating114 ekW
-
Maximum Rating200 ekW
-
Emissions/Fuel StrategyU.S. EPA Cert,. Tier 3
-
Voltage208 to 480 Volts
-
Frequency60 Hz
-
Speed1800 rpm
Engine Specifications
-
Engine ModelC7.1 I-6, 4-Cycle Diesel
-
Displacement427.8 in³
-
Fuel SystemCommon Rail
-
AspirationTurbocharged, Air to Air Aftercooled
-
Governor TypeADEM™A4
-
Compression Ratio16.5:1
-
Bore4.13 in
-
Stroke5.31 in
Generator Set Dimensions
-
Length - Maximum98.4 in
-
Width - Maximum52 in
-
Height - Maximum64 in
Design Criteria
- The generator set is designed to meet ISO8528-5 transient response and NFPA 110.
- Cooling system designed to operate in 50˚C / 122˚F ambient temperatures with an air flow restriction of 0.5 in. water
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- IP 23 Protection
EMCP Control Panel
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. The EMCP 4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP 4 systems can be further customized to meet your needs through programming and expansion modules. The EMCP4.1 is fitted as standard
World Wide Product Support
Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products
Single-Source Supplier
Fully prototype tested with certified torsional vibration analysis available
CE Certification
CE Certification available
General
- Single wall 8 hour wide fuel tank
- Circuit breaker, IEC, 3 pole
- Industrial Silencer (10 dBA)
Standard Equipment:
-
- Air Inlet System
-
- Air Cleaner; light duty with disposable element
-
- Control Panels
-
- EMCP 4.1
-
- Cooling System
-
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guards
- Caterpillar extended life coolant
- Coolant drain line with valves
-
- Exhaust System
-
- Stub pipe, gaskets, raincap and SAE exhaust flange for customer use; shipped loose
-
- Fuel System
-
- Standard open set fuel tank / base supplied
- Base, formed steel with single wall integral 8-hour fuel tank
-
- Generator And Generator Attachments
-
- Voltage regulator (single phase sensing)
- 12 leads
- IP23 protection
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- Segregated low voltage (AC/DC) wiring panel
- Tower panel, IP22, bottom cable entry
-
- Starting / Charging System
-
- 24V battery with rack and cables
-
- Governing System
-
- Mechanical and electrical governing system - model dependent
-
- Lube System
-
- Lubricating oil
- Oil drain line with valve
-
- Mounting System
-
- Includes lifting provision and drag points
- Captive linear vibration isolators between base and engine-generator
- Termination points for coolant and lube oil drain lines
-
- General
-
- Engine and alternator pre-paint, Caterpillar Yellow
Optional Equipment:
-
- Alternator System
-
- Anti-condensation heater
- 3 Phase sensing
- Alternator removal
- Optional LC frame alternators
- Quatrature droop king
- R frame auxiliary winding: R2273L4 SE aux alt 07, aux alt 08 and aux alt 10
- Optional LC frame alternator with coastal insulation protection
- Permanent magnet
-
- Circuit Breakers
-
- 4 Pole 250A, 400A and 630A Circuit Breakers
- Padlockable breaker device
-
- Control Panel Options
-
- Earth fault (2 wire only)
- Control panel heater
- Battery charger
- Earth leakage (2 wire only)
- Speed adjust contacts
- Volt free contacts
- Overload shutdown via breaker
- Emergency stop with key
- Speed adjust potentiometer
- Panel mounted audible alarm
-
- Cooling System
-
- Low coolant level shutdown
- Coolant heater
- Low coolant temperature
-
- Control System
-
- Volt free contacts for generator set running
- Volt free contacts for common alarm
- EMCP 4.2
- Static battery charger
- Control panel heater
-
- Enclosures
-
- Rental options (CAE only) - Socket blanking plate
- Rental options (CAE only) - Single point lift
- Rental options (CAE only) - Rental pack
- Rental options (CAE only) - CEE form sockets for enclosure
- Sound attenuated levels 1 and 2 enclosures
-
- European Certifications
-
- Upgrade to STD set for CE
-
- Fuel Systems
-
- Compact skidbase for open sets
- Low fuel level alarm
- DEFRA bunded fuel tank
- Low fuel level shutdown
- Open set narrow tankbase
- Skidbase for CALG enclosure sets
- High fuel level alarm
-
- Mounting Options
-
- Industrial silencer removal
- Silencer installation kit
- Electronic governor
- Residential silencer
- Battery removal
-
- Test Reports
-
- PGS test report @ 1.0 power factor
- PGS test report @ 0.8 power factor
-
- General
-
- Stone guards / radiator trans flange
-
- Global Certifications
-
- Certification for CIS
-
- Power Termination
-
- Circuit breaker, IEC, 4 pole
-
- Accessories / Miscellaneous
-
- Packing case - canopied set
- Packing case - compact set