3616 Generator Set (Medium Speed)
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
PRICE (USD)
Call 440-838-7348 for rate information
Engine Specifications
-
Bore11 in
-
Displacement1127 in3
-
Stroke11.8 in
-
AspirationTA
-
Fuel SystemDirect unit injection
-
Engine Model3616 V-16, 4-Stroke Water-Cooled Diesel
-
Total Displacement18032 in³
-
Compression Ratio13:01
-
Governor TypeGenerator Set Monitoring System (GMS)
-
AspirationTA
-
Fuel SystemDirect unit injection
-
Bore11 in
-
Displacement18032 in³
-
Stroke11.8 in
-
Fuel System18032 in³
Generator Set Specifications
-
Minimum Rating4700 kVA
-
Maximum Rating7520 kVA
-
Frequency50 Hz
-
Speed720 & 1000 rpm
-
Emissions/Fuel StrategyLow Fuel Consumption
-
Duty CycleStandby, Prime, Continuous
Generator Set Dimensions
-
Length - Maximum404 in
-
Height - Maximum156.6 in
-
Width - Maximum99.62 in
-
Dry Weight - Genset (maximum)141840 lb
Cat Diesel Engine
Generator
World Wide Product Support
Full Range of Attachments
Standard Equipment:
-
- Air Inlet System
-
- Turbocharger, watercooled, engine oil lubricated
- Air inlet shutoff
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
- Breather, crankcase, top-mounted
-
- Cooling System
-
- Front mounted turbos
- Three-bundle oil cooler
- Engine coolant water drains
- Water temperature regulator
- Jacket water thermostats
-
- Exhaust System
-
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by Dealer
-
- Governor System
-
- UG actuator
-
- Lube System
-
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication & oil pumps, oil lines and oil pan
- Crankcase explosion relief valves
- Oil filler and dipstick
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
-
- Mounting System
-
- Engine and generator mounting
- Damper, torsional vibration
-
- Starting / Charging System
-
- Line group for single point custom connection
- Two motors, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
-
- General:
-
- Gear driven pumps: Fuel / Oil / Jacket water / Aftercooler / Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment:
-
- Air Inlet System
-
- Soot filter
- Air inlet adapter
- Heavy duty air cleaner
- Vertical support bracket
- Air cleaner louver assembly
- Boost control valve
-
- Cooling System
-
- Expansion tank
- Auxiliary water pump
- Heating aids
- Cooling system aids
- Heat exchanger for single circuit
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Duplex primary fuel strainer
- Fuel priming pump
- Fuel system connections
-
- Generator System
-
- Busbar connections
- Anti-condensation space heaters
- Class F insulation
- 3 Phase, six Leads, WYE
- Winding temperature detectors
-
- Governor System
-
- 230 UA
- Battery backup / Power supply
- Digital programmers
- EGB actuator
- Electronic / actuators
- 723 Plus
-
- Lube System
-
- Lube ANSI adapter (Emergency connection)
- Oil pan drain valve
-
- Mounting System
-
- Spring type vibration isolator
- Non-vertically restrained
- Vertically restrained
- Isolator
-
- Starting / Charging System
-
- Turbine type air starters
- Redundant air starters
- Pressure reducing valve
- Compressed air flex hose
-
- General:
-
- Custom paint colors