3616 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Videos not available for this product.

360 View not available for this product.

Add to Cart

SPECIFICATION SUMMARY

Bore 11 in
Displacement 1127 in³
Stroke 11.8 in
Aspiration TA

PRICE (USD)

Call 440-838-7348 for rate information

Engine Specifications

Bore

11 in
Displacement

1127 in³
Stroke

11.8 in
Aspiration

TA
Fuel System

Direct unit injection
Engine Model

3616 V-16,4-Stroke Water-Cooled Diesel
Total Displacement

18032 in³
Compression Ratio

13:01
Governor Type

Generator Set Monitoring System (GMS)
Aspiration

TA
Fuel System

Direct unit injection
Bore

11 in
Displacement

18032 in³
Stroke

11.8 in
Fuel System

18032 in³

Generator Set Specifications

Minimum Rating

3350 ekW
Maximum Rating

5320 ekW
Frequency

60 Hz
Speed

720 & 900 rpm
Emissions/Fuel Strategy

Low Fuel Consumption
Duty Cycle

Prime, Continuous

Generator Set Dimensions

Dry Weight - Genset (maximum)

141840 lb
Height - Maximum

156.6 in
Width - Maximum

99.62 in
Length - Maximum

404 in

Cat Diesel Engine

Generator

World Wide Product Support

Full Range of Attachments

Standard Equipment:

Air Inlet System
- Air Cleaner
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated
- Air inlet shutoff
Cooling System
- Three-bundle oil cooler
- Jacket Water Thermostats
- Water Temperature Regulator
- Engine coolant water drains
- Front Mounted Turbos
Exhaust System
- Dry, Gas Tight, Exhaust Manifold
- 457 mm (18 in) Cat bolt pattern
- Includes Adapter, Flexible Exhaust Fitting
Fuel System
- Simplex or Duplex
Generator System
- Custom Generator per Generator Data Sheet completed by Dealer
Governor System
- UG Actuator
Lube System
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Centrifugal Oil Filters with Single Shutoff
- Oil Filler and Dipstick
- Oil Pressure Regulating Valve
- Wet Oil Sump. Includes engine-driven main Lubrication & Oil pumps, Oil Lines and Oil Pan
- Crankcase Explosion Relief Valves
Mounting System
- Damper, Torsional Vibration
- Engine and Generator Mounting
Starting / Charging System
- Line Group for Single Point Custom Connection
- Two Motors, engine mounted at rear, on left side
- Air Silencer
- Vane Type Air Starter
General:
- Gear driven Pumps: Fuel, Oil, Jacket Water, Aftercooler / Oil Cooler Water
- Paint, Caterpillar Yellow

Optional Equipment:

Air Inlet System
- Heavy Duty Air Cleaner
- Soot Filter
- Boost Control Valve
- Vertical Support Bracket
- Air Inlet Adapter
- Air cleaner Louver Assembly
Cooling System
- Cooling System Aids
- Auxiliary Water Pump
- Heat Exchanger for Single Circuit
- Expansion Tank
- Heating Aids
Exhaust System
- Flexible Exhaust Fittings
- Weld Flange and Related Hardware
Fuel System
- Duplex Primary Fuel Strainer
- Fuel Priming Pump
- Fuel System Connections
Generator System
- 3 Phase, Six Leads, WYE
- Anti-condensation Space Heaters
- Winding Temperature Detectors
- Bus Bar Connections
- Class F Insulation
Governor System
- 723 Plus
- Electronic / Actuators
- EGB Actuator
- Digital Programmers
- 230 UA
- Battery Backup / Power Supply
Lube System
- Lube ANSI Adapter (Emergency connection)
- Oil Pan Drain Valve
Mounting System
- Isolator
- Non-vertically Restrained
- Vertically Restrained
- Spring Type Vibration Isolator
Starting / Charging System
- Pressure Reducing Valve
- Compressed Air Flex Hose
- Turbine Type Air Starters
- Redundant Air Starters
General:
- Custom Paint Colors