3612 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Videos not available for this product.

360 View not available for this product.

Add to Cart

SPECIFICATION SUMMARY

Bore 11 in
Displacement 1127 in³
Stroke 11.8 in
Aspiration TA

PRICE (USD)

Call 440-838-7348 for rate information

Engine Specifications

Bore

11 in
Displacement

1127 in³
Stroke

11.8 in
Aspiration

TA
Fuel System

Direct unit injection
Engine Model

3612 V-12,4-Stroke Water-Cooled Diesel
Total Displacement

13524 in³
Compression Ratio

13:01
Governor Type

Generator Set Monitoring System (GMS)
Aspiration

TA
Fuel System

Direct unit injection
Bore

11 in
Displacement

13524 in³
Stroke

11.8 in
Fuel System

13524 in³

Generator Set Specifications

Minimum Rating

4400 kVA
Maximum Rating

4850 kVA
Frequency

50 Hz
Speed

750 & 1000 rpm
Emissions/Fuel Strategy

Low Fuel Consumption
Duty Cycle

Prime, Continuous

Generator Set Dimensions

Dry Weight - Genset (maximum)

112690 lb
Height - Maximum

156.6 in
Width - Maximum

99.62 in
Length - Maximum

404 in

Cat Diesel Engine

Generator

World Wide Product Support

Full Range of Attachments

Standard Equipment:

Air Inlet System
- Air cleaner
- Turbocharger, watercooled, engine oil lubricated
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air inlet shutoff
Cooling System
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
- Front mounted turbos
- Three-bundle oil cooler
Exhaust System
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG actuator
Lube System
- Centrifugal oil filters with single shutoff
- Oil filler and dipstick
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
- Service side engine mounted on cylinder block inspection covers
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- Line group for single point custom connection
- Vane type air starter
- Two motors, engine mounted at rear, on left side
- Air silencer
General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel, Oil, Jacket water, Aftercooler / Oil cooler water

Optional Equipment:

Air Inlet System
- Vertical support bracket
- Soot filter
- Boost control valve
- Heavy duty air cleaner
- Air cleaner louver assembly
- Air inlet adapter
Cooling System
- Heating aids
- Auxiliary water pump
- Expansion tank
- Heat exchanger for single circuit
- Cooling system aids
Exhaust System
- Flexible exhaust fittings
- Weld flange and related hardware
Fuel System
- Duplex primary fuel strainer
- Fuel system connections
- Fuel priming pump
Generator System
- Anti-condensation space heaters
- Class F insulation
- Busbar connections
- Winding temperature detectors
- 3 Phase, six Leads, WYE
Governor System
- 230 UA
- EGB actuator
- Digital programmers
- Electronic / actuators
- 723 Plus
- Battery backup / Power supply
Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
Mounting System
- Spring type vibration isolator
- Vertically restrained
- Isolator
- Non-vertically restrained
Starting / Charging System
- Compressed air flex hose
- Redundant Air Starters
- Pressure reducing valve
- Turbine type air starters
General:
- Custom paint colors