3606 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Videos not available for this product.

360 View not available for this product.

Add to Cart

SPECIFICATION SUMMARY

Bore 11 in
Displacement 1127 in³
Stroke 11.8 in
Aspiration TA

PRICE (USD)

Call 440-838-7348 for rate information

Engine Specifications

Bore

11 in
Displacement

1127 in³
Stroke

11.8 in
Aspiration

TA
Fuel System

Direct unit injection
Engine Model

3606 I-6, 4-Stroke Water-Cooled Diesel
Total Displacement

6762 in³
Compression Ratio

13:01
Governor Type

Generator Set Monitoring System (GMS)
Aspiration

TA
Fuel System

Direct unit injection
Bore

11 in
Displacement

6762 in³
Stroke

11.8 in
Fuel System

6762 in³

Generator Set Specifications

Minimum Rating

1775 kVA
Maximum Rating

2688 kVA
Frequency

50 Hz
Speed

750 & 1000 rpm
Emissions/Fuel Strategy

Low Fuel Consumption
Duty Cycle

Continuous

Generator Set Dimensions

Height - Maximum

156.6 in
Dry Weight - Genset (maximum)

74970 lb
Width - Maximum

99.62 in
Length - Maximum

404 in

Cat Diesel Engine

SR5 Alternator

World Wide Product Support

Full Range of Attachments

Standard Equipment:

Air Inlet System
- Breather, crankcase, top-mounted
- Air inlet shutoff
- Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
- Aftercooler, fresh water, corrosion resistant coated (air side)
Cooling System
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, Flexible exhaust fitting
Fuel System
- Simplex or Duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
- Oil filler and dipstick
- Crankcase explosion relief valves
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- One motor, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
- Line group for single point custom connection
General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel, Oil, Jacket water, Aftercooler / Oil cooler water

Optional Equipment:

Air Inlet System
- Boost control valve
- Soot filter
- Heavy duty air cleaner
- Air inlet adapter
- Vertical support bracket
- Air cleaner louver assembly
- Air cleaner
Cooling System
- Expansion tank
- Auxiliary water pump
- Cooling system aids
- Heating aids
Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
Fuel System
- Fuel system connections
- Duplex primary fuel strainer
- Fuel priming pump
Generator System
- Class F insulation
- 3 Phase, six Leads, WYE
- Anti-condensation space heaters
- Winding temperature detectors
- Busbar connections
Governor System
- Electronic / actuators
- Digital programmers
- 2301 A load share
- EGB actuator
- Battery backup / Power supply
- 723 Plus
Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
Mounting System
- Non-vertically restrained
- Spring type vibration isolator
- Vertically restrained
- Isolator
Starting / Charging System
- Compressed air flex hose
- Pressure reducing valve
General:
- Custom paint colors