Cat® 3412C Fire Pump
Cat® 3412C Industrial Diesel Fire Pump Engines, with ratings: 476-551 kW (638-739 hp) @ 1750-2100 rpm, are non-certified and are available for global non-regulated areas. They are not FM Approved and not UL Listed. Starting on demand is a must for a fire pump engine – always. Cat® fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
- Minimum Power 638.0 bhp
- Maximum Power 739.0 bhp
- Emissions Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
- Rated Speed 1750-2100 rpm
PRICE (USD)
Call 440-838-7348 for rate information
Power Rating
-
Minimum Power638.0 bhp
-
Maximum Power739.0 bhp
-
Rated Speed1750-2100 rpm
-
Minimum Power638 HP
-
Maximum Power739 HP
-
Rated Speed1750-2100 rpm
Emission Standards
-
EmissionsNon-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
-
EmissionsNon-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
General
-
AspirationTurbocharged Aftercooled (TA)
-
Compression Ratio14.5:1
-
Rotation (from flywheel end)Counterclockwise
-
Engine ConfigurationV-12, 4-Stroke-Cycle Diesel
-
Bore137.2 mm (5.4 in)
-
Stroke152.4 mm (6.0 in)
-
Displacement27 L (1648 in³)
-
AspirationTurbocharged Aftercooled (TA)
-
Compression Ratio14.5:1
-
Rotation from Flywheel EndCounterclockwise
-
Bore5.4 in
-
Stroke6 in
-
Displacement1648 in³
Engine Dimensions - Approximate
-
Height1413.2 mm (55.6 in)
-
Length1999.8 mm (78.7 in)
-
Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)2579 kg (5686 lb)
-
Weight - Net Dry - Basic Operating Engine Without Optional Attachments5686 lb
-
Length78.7 in
-
Height55.6 in
Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
World-class Product Support Offered Through Global Cat Dealer Network
- Scheduled maintenance, including SOSSM sample
- Customer Support Agreements (CSA)
- Caterpillar Extended Service Coverage (ESC)
- Superior dealer service network
- Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner, regular duty with service indicators
- Turbocharged
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump, centrifugal
- Heat exchanger installed
- Expansion tank
-
- Control System
-
- Charging alternator 24 volt, 35 amp
- Governor control
- Hydra-mechanical governor
-
- Exhaust System
-
- Exhaust manifold
- Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
-
- Flywheels & Flywheel Housings
-
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Fuel filter
- Fuel transfer pump
- Primary fuel filter
- Fuel priming pump
-
- Instrumentation
-
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Tachometer
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler in valve cover and dipstick, both RH
- Lube oil filter
- Rear sump oil pan
-
- Mounting System
-
- Supports
-
- Power Take Off
-
- Power take-off (PTO) flywheel stub shaft
-
- Protection System
-
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
-
- Starting System
-
- 24 volt, LH electric starting motor
- Jacket water heater (6 kW, 240-480 volt)
-
- General
-
- Paint: Firepump Red
- Vibration damper and guard
- Lifting eyes