Your Rental Location
  • Request A Quote

Cat C32 Propulsion Engine (US EPA Tier 3 / IMO II)

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Power Range 61-1450 bhp (46-1072 bkW)
  • Rated Engine Speed 1600-2300 rpm
  • Emissions U.S. EPA Tier 3 / IMO II emissions certified
  • Aspiration Turbocharged-aftercooled aspiration

PRICE (USD)
Call 440-838-7348 for rate information

Power Rating

  • Power Range
    61-1450 bhp (46-1072 bkW)
  • Power Range
    61-1450 bhp (46-1072 bkW)

Engine Specifications

  • Rated Engine Speed
    1600-2300 rpm
  • Emissions
    U.S. EPA Tier 3 / IMO II emissions certified
  • Aspiration
    Turbocharged-aftercooled aspiration
  • Bore
    5.71 in
  • Stroke
    6.38 in
  • Displacement
    1959 cu in
  • Configuration
    Vee 12, 4-stroke-cycle diesel
  • Governor
    Electronic (A4 ECM)
  • Refill Capacity
    Lube Oil System w/Oil filter change: 146 L (38.5 gal)
  • Oil Change Interval
    1000 hrs
  • Cooling
    Heat exchanger or keel cooled
  • Flywheel Housing
    SAE No. 0 with SAE No. 18 flywheel (136 teeth)
  • Rotation from Flywheel End
    Counterclockwise from flywheel end
  • Emissions
    U.S. EPA Tier 3 / IMO II emissions certified
  • Aspiration
    Turbocharged-aftercooled aspiration
  • Bore
    5.71 in
  • Stroke
    6.38 in
  • Displacement
    1959 in³
  • Rated Engine Speed
    1600-2300 rpm

Dimensions & Weights

  • Minimum Engine Dry Weight
    6950.0 lb
  • Minimum Length
    83.9 in
  • Minimum Height
    59.3 in
  • Minimum Width
    57.1 in
  • Maximum Length
    89.8 in
  • Maximum Height
    63.5 in
  • Maximum Width
    57.3 in
  • Maximum Engine Dry Weight
    7160 lb
  • Minimum Length
    83.9 in
  • Minimum Height
    59.3 in
  • Minimum Width
    57.1 in
  • Minimum Engine Dry Weight
    6950 lb

Air Inlet System

Separate-circuit aftercooling – no sea water in aftercooler

Emissions

Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment

Control Strategy

Reliable electronic controlled unit injector fuel system

Fuel System

Enhanced control of fuel injection optimized through crank timing and the A4 ECM technology

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Standard Equipment:

  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Fuel System
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • Lube System
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • Mounting System
    • Adjustable front support mounting system
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment:

  • Air Inlet System
    • Closed crankcase fumes disposal
  • Alarm And Protection
    • MECP I control panel
    • MECP II or MECP III control panel with Cat® Alarm and Protection System
  • Charging System
    • Charging alternator
  • Fuel System
    • Primary fuel filter with water separator, fuel cooler
  • Lube System
    • Duplex oil filters
  • Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • Starting System
    • Starting motors – air, electric or dual