Your Rental Location
  • Request A Quote

930M Aggregate Handler Small Wheel Loader

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Operating Weight 31144 lb
  • Bucket Capacities 2.5-2.7 m3 (3.3-3.5 yd3)
  • Engine Model Cat® C7.1 ACERT™
  • Rated Net Power 157 HP

PRICE (USD)
Call 800-637-5000 for rate information

Weights

  • Operating Weight
    31144 lb
  • Operating Weight
    31848 lb
  • Note (2)
    ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
  • Note (1)
    **Aggregate Handler machine equipped with full counterweight and optional guards.

Buckets

  • Bucket Capacities
    2.5-2.7 m3 (3.3-3.5 yd3)
  • Bucket Capacities
    2.5-5.0 m3 (3.3-6.5 yd3)

Engine

  • Engine Model
    Cat® C7.1 ACERT™
  • Rated Net Power
    157 HP
  • Maximum Rated Gross Power - ISO 14396
    168 HP
  • Maximum Rated Gross Power - ISO 14396 (DIN)
    166 HP
  • Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
    1800 r/min
  • Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
    164 HP
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
    166 HP
  • Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    157 HP
  • Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    160 HP
  • Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    162 hp
  • Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)
    592 lbf-ft
  • Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)
    566 lbf-ft
  • Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    572 lbf-ft
  • Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
    1800 r/min
  • Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)
    160 hp
  • Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    162 hp
  • Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    154 hp
  • Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    156 hp
  • Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    158 hp
  • Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)
    592 lbf-ft
  • Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)
    566 lbf-ft
  • Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    572 lbf-ft
  • Displacement
    427 in3
  • Bore
    4 in
  • Emissions
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Stroke
    5 in
  • Note
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note
    Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
  • Maximum Gross Power
    164 hp
  • Engine Model
    Cat® C7.1
  • Maximum Gross Power
    168 HP
  • Bore
    4 in
  • Stroke
    5 in
  • Displacement
    427 in³
  • Emissions
    The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
  • Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
    601 ft·lbf
  • Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
    586 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    572 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    572 ft·lbf
  • Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
    588 ft·lbf
  • Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
    573 ft·lbf
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    162 HP
  • Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
    160 HP
  • Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600 r/min
  • Note (1)
    *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note (2)
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note (3)
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note (4)
    Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
  • Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    156 HP
  • Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    158 HP
  • Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    154 HP
  • Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    162 HP
  • Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
    160 HP
  • Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
    168 HP
  • Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600 r/min

Steering

  • Steering Cylinder: Double Acting – Bore Diameter
    2.8 in
  • Steering Cylinder: Double Acting – Rod Diameter
    1.6 in
  • Steering Cylinder: Double Acting – Stroke
    17.2 in
  • Maximum Flow – Steering Pump
    34 gal/min
  • Maximum Working Pressure – Steering Pump
    3500 psi
  • Maximum Steering Torque – 0° (Straight Machine)
    37155 lbf-ft
  • Maximum Steering Torque – 40° (Full Turn)
    27747 lbf-ft
  • Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
    2.8 seconds
  • Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed
    2.4 seconds
  • Note
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Maximum Flow - Steering Pump
    34 gal/min
  • Maximum Steering Torque - 0° (Straight Machine)
    37155 ft·lbf
  • Maximum Steering Torque - 40° (Full Turn)
    27747 ft·lbf
  • Maximum Working Pressure - Steering Pump
    3500 psi
  • Note (1)
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note (2)
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
    2.4 s
  • Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
    2.8 s
  • Steering Cylinder, Double Acting - Bore Diameter
    2.8 in
  • Steering Cylinder, Double Acting - Rod Diameter
    1.6 in
  • Steering Cylinder, Double Acting - Stroke
    17.2 in

Loader Hydraulic System

  • Maximum Flow – Implement Pump
    50 gal/min
  • Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
    50 gal/min
  • Maximum Working Pressure – Implement Pump
    3626 psi
  • Relief Pressure – Tilt Cylinder
    4061 psi
  • Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
    3626 psi
  • Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
    4061 psi
  • Lift Cylinder: Double Acting – Bore Diameter
    4.7 in
  • Lift Cylinder: Double Acting – Rod Diameter
    2.6 in
  • Lift Cylinder: Double Acting – Stroke
    28.7 in
  • Tilt Cylinder: Double Acting – Bore Diameter
    5.9 in
  • Tilt Cylinder: Double Acting – Rod Diameter
    3.5 in
  • Tilt Cylinder: Double Acting – Stroke
    21.9 in
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)
    5.1/5.7 seconds
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)
    1.5/1.7 seconds
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)
    2.7/2.7 seconds
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time
    9.3/10.1 seconds
  • Note
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
  • Note
    * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
    1.5/1.7 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
    2.7/2.7 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
    5.1/5.7 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
    9.3/10.1 seconds
  • Lift Cylinder, Double Acting - Bore Diameter
    4.7 in
  • Lift Cylinder, Double Acting - Rod Diameter
    2.6 in
  • Lift Cylinder, Double Acting - Stroke
    28.7 in
  • Maximum Flow - Implement Pump
    50 gal/min
  • Maximum Flow - Implement Pump - 3rd Function*
    50 gal/min
  • Maximum Working Pressure - Implement Pump
    3771 psi
  • Note (1)
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note (2)
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Note (3)
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
  • Relief Pressure - Tilt Cylinder
    4061 psi
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
    3626 psi
  • Tilt Cylinder, Double Acting - Bore Diameter
    5.9 in
  • Tilt Cylinder, Double Acting - Rod Diameter
    3.5 in
  • Tilt Cylinder, Double Acting - Stroke
    21.9 in
  • Maximum Flow - Implement Pump - 4th Function Maximum Flow*
    42 gal/min
  • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
    4061 psi
  • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
    3771 psi

Service Refill Capacities

  • Fuel Tank
    51.5 gal
  • Cooling System
    7.9 gal
  • Engine Crankcase
    5.3 gal
  • Transmission (Gear Box)
    2.2 gal
  • Front Axles
    6.9 gal
  • Rear Axles
    6.6 gal
  • Hydraulic System (Including Tank)
    43.6 gal
  • Hydraulic Tank
    23.8 gal
  • Diesel Exhaust Fluid (DEF) Tank
    5.0 gal
  • Cooling System
    7.9 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank
    5 gal (US)
  • Engine Crankcase
    5.3 gal (US)
  • Front Axles
    6.9 gal (US)
  • Fuel Tank
    51.5 gal (US)
  • Hydraulic System - Including Tank
    43.6 gal (US)
  • Hydraulic Tank
    23.8 gal (US)
  • Rear Axles
    6.6 gal (US)
  • Transmission - Gear Box
    2.2 gal (US)

Transmission

  • Forward and Reverse: Range 1*
    1-13 km/h (0.6-8 mph)
  • Forward and Reverse: Range 2
    8 mph
  • Forward and Reverse: Range 3
    17 mph
  • Forward and Reverse: Range 4
    25 mph
  • Note
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
  • Forward and Reverse - Range 1*
    1-13 km/h (0.6-8 mph)
  • Forward and Reverse - Range 2
    8 mile/h
  • Forward and Reverse - Range 3
    17 mile/h
  • Forward and Reverse - Range 4
    25 mile/h
  • Note
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Cab

  • ROPS
    ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
  • Declared Sound Levels
    Declared Sound Levels
    – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
    – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
  • Note
    * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl
  • Note
    The Blue Angel environmental label is an optional attachment for Europe only.
  • ROPS
    ISO 3471:2008
  • Note (1)
    * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
  • Note (2)
    The Blue Angel environmental label is an optional attachment for Europe only.
  • FOPS
    ISO 3449:2005 LEVEL II

Operating Specifications

  • Full Turn Tip Load
    19563 lb
  • Full Turn Tip Load
    19563 lb
  • Full Turn Tip Load (1)
    9203 kg (20,289 lb)**
  • Note (2)
    ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
  • Note (1)
    **Aggregate Handler machine equipped with full counterweight and optional guards.

Power Train

  • Front Axle
    Fixed
  • Front Axle: Traction Aid**
    Locking differential (standard)
  • Rear Axle
    Oscillating
  • Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
  • Rear Axle: Traction Aid (optional)
    Limited slip differential
  • Brakes: Service
    Inboard wet disc
  • Brakes: Park
    Spring applied hydraulically released
  • Note
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Note
    Offset rims available to meet European roading requirements.
  • Note
    **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
  • Brakes - Parking
    Spring applied hydraulically released
  • Brakes - Service
    Inboard wet disc
  • Front Axle
    Fixed
  • Front Axle - Traction Aid**
    Locking differential (standard)
  • Note (1)
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Note (2)
    Offset rims available to meet European roading requirements.
  • Note (3)
    *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
  • Rear Axle
    Oscillating
  • Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
  • Rear Axle - Traction Aid - Optional
    Limited slip differential
  • Front Axle - Traction Aid*
    Locking differential (standard)

Air Conditioning System

  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Standard Equipment:

  • Power Train
    • Axle Duo-Cone seal guards
    • Auto idle shut down feature
    • Cat C7.1 engine
      – Power modes (Standard and Performance)
      – Power by range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      – Operator modes (Default, TC, Hystat, and Ice)
      – Directional Shift Aggressiveness (fast, medium, slow)
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Oil sampling ports
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • Electrical
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, pressurized
    • Camera, rearview
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Hydraulic control lockout
    • Mirror, single
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Suspension seat, fabric
  • Other Standard Equipment
    • Large-access enclosure doors with adjustable close/open force
    • Cat optimized Z-bar linkage with parallel lift
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures

Optional Equipment:

  • Optional Equipment
    • Autolube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Differential, limited slip, rear
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      – Camera, rearview integrated into advanced display
      – Electrically adjustable external heated mirrors (2)
      – Secondary display to enable features and adjust parameters
      – LED interior lighting
      – Sunscreen, front and rear
      – Touchscreen secondary display
      – Ride control adjustable speed activation
      – Preventative maintenance reminders
      – Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cold start package
      – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Counterweight, additional options
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guarding packages
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Payload Technology
      – Cat Production Measurement (CPM)
      – CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Rear Object Detection
    • Ride Control System, adjustable through secondary display
    • Seats
      – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      – Dual mode and secondary
    • Tire Pressure Monitoring (TPM)
was successfully added to the cart! Request Quote