Your Rental Location
  • Request A Quote

926M Aggregate Handler Small Wheel Loader

The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Operating Weight 28933 lb
  • Bucket Capacities 2.5 m3 (3.3 yd3)
  • Engine Model Cat® C7.1 ACERT™
  • Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 517 ft·lbf

PRICE (USD)
Call 800-637-5000 for rate information

Weights

  • Operating Weight
    28933 lb
  • Operating Weight
    29256 lb
  • Note
    Aggregate Handler machine equipped with side guards and roading fenders.

Buckets

  • Bucket Capacities
    2.5 m3 (3.3 yd3)
  • Bucket Capacities
    3.0-5.0 m³ (3.9-6.5 yd³)

Engine

  • Engine Model
    Cat® C7.1 ACERT™
  • Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
    517 ft·lbf
  • Rated Net Power
    148 HP
  • Maximum Rated Gross Power - ISO 14396
    153 HP
  • Maximum Rated Gross Power - ISO 14396 (DIN)
    155 HP
  • Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
    1800 r/min
  • Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
    153 HP
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
    155 HP
  • Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    148 HP
  • Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    149 HP
  • Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    151 hp
  • Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)
    531 lbf-ft
  • Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)
    511 lbf-ft
  • Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    517 lbf-ft
  • Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600 rpm
  • Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)
    146 hp
  • Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    148 hp
  • Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    141 hp
  • Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    142 hp
  • Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    144 hp
  • Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)
    531 lbf-ft
  • Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)
    511 lbf-ft
  • Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    517 lbf-ft
  • Displacement
    427 in3
  • Bore
    4 in
  • Emissions
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Stroke
    5 in
  • Note
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note
    Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
  • Maximum Gross Power
    153 hp
  • Engine Model
    Cat® C7.1
  • Maximum Gross Power
    155 HP
  • Bore
    4 in
  • Stroke
    5 in
  • Displacement
    427 in³
  • Emissions
    The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage IV off-highway emission standards.
  • Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
    531 ft·lbf
  • Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
    531 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
    517 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
    517 ft·lbf
  • Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
    511 ft·lbf
  • Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
    511 ft·lbf
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
    148 HP
  • Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
    146 HP
  • Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
    1600 r/min
  • Note (1)
    *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note (2)
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note (3)
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note (4)
    Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
  • Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    142 HP
  • Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    144 HP
  • Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
    141 HP
  • Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
    151 HP

Steering

  • Steering Cylinder: Double Acting – Bore Diameter
    2.8 in
  • Steering Cylinder: Double Acting – Rod Diameter
    1.6 in
  • Steering Cylinder: Double Acting – Stroke
    17.2 in
  • Maximum Flow – Steering Pump
    34 gal/min
  • Maximum Working Pressure – Steering Pump
    3500 psi
  • Maximum Steering Torque – 0° (Straight Machine)
    37155 lbf-ft
  • Maximum Steering Torque – 40° (Full Turn)
    27747 lbf-ft
  • Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
    2.8 seconds
  • Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed
    2.4 seconds
  • Note
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Maximum Flow - Steering Pump
    34 gal/min
  • Maximum Steering Torque - 0° (Straight Machine)
    37155 ft·lbf
  • Maximum Steering Torque - 40° (Full Turn)
    27747 ft·lbf
  • Maximum Working Pressure - Steering Pump
    3500 psi
  • Note (1)
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note (2)
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
    2.4 s
  • Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
    2.8 s
  • Steering Cylinder, Double Acting - Bore Diameter
    2.8 in
  • Steering Cylinder, Double Acting - Rod Diameter
    1.6 in
  • Steering Cylinder, Double Acting - Stroke
    17.2 in

Loader Hydraulic System

  • Maximum Flow – Implement Pump
    40 gal/min
  • Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
    40 gal/min
  • Maximum Working Pressure – Implement Pump
    3771 psi
  • Relief Pressure – Tilt Cylinder
    4061 psi
  • Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
    3771 psi
  • Relief Pressure – Tilt Cylinder: 3rd Function Relief Pressure
    4061 psi
  • Lift Cylinder: Double Acting – Bore Diameter
    4.3 in
  • Lift Cylinder: Double Acting – Rod Diameter
    2.4 in
  • Lift Cylinder: Double Acting – Stroke
    28.7 in
  • Tilt Cylinder: Double Acting – Bore Diameter
    5.1 in
  • Tilt Cylinder: Double Acting – Rod Diameter
    2.8 in
  • Tilt Cylinder: Double Acting – Stroke
    21.9 in
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)
    5.5/6.2 seconds
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)
    1.5/1.7 seconds
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)
    2.6/2.6 seconds
  • Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time
    9.6/10.5 seconds
  • Note
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
  • Note
    * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
    1.5/1.7 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
    2.6/2.6 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
    5.5/6.2 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
    9.6/10.5 seconds
  • Lift Cylinder, Double Acting - Bore Diameter
    4.3 in
  • Lift Cylinder, Double Acting - Rod Diameter
    2.4 in
  • Lift Cylinder, Double Acting - Stroke
    28.7 in
  • Maximum Flow - Implement Pump
    40 gal/min
  • Maximum Flow - Implement Pump - 3rd Function*
    40 gal/min
  • Maximum Working Pressure - Implement Pump
    3771 psi
  • Note (1)
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note (2)
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Note (3)
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
  • Relief Pressure - Tilt Cylinder
    4061 psi
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
    3771 psi
  • Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
    4061 psi
  • Tilt Cylinder, Double Acting - Bore Diameter
    5.1 in
  • Tilt Cylinder, Double Acting - Rod Diameter
    2.8 in
  • Tilt Cylinder, Double Acting - Stroke
    21.9 in
  • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
    3771 psi
  • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
    4061 psi
  • Maximum Flow - Implement Pump - 4th Function Maximum Flow*
    40 gal/min

Service Refill Capacities

  • Fuel Tank
    51.5 gal
  • Cooling System
    7.9 gal
  • Engine Crankcase
    5.3 gal
  • Transmission (Gear Box)
    2.2 gal
  • Front Axles
    5.5 gal
  • Rear Axles
    5.5 gal
  • Hydraulic System (Including Tank)
    42.3 gal
  • Hydraulic Tank
    23.8 gal
  • Diesel Exhaust Fluid (DEF) Tank
    5.0 gal
  • Cooling System
    7.9 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank
    5 gal (US)
  • Engine Crankcase
    5.3 gal (US)
  • Front Axles
    5.5 gal (US)
  • Fuel Tank
    51.5 gal (US)
  • Hydraulic System - Including Tank
    42.3 gal (US)
  • Hydraulic Tank
    23.8 gal (US)
  • Rear Axles
    5.5 gal (US)
  • Transmission - Gear Box
    2.2 gal (US)

Transmission

  • Forward and Reverse: Range 1*
    1-13 km/h (0.6-8 mph)
  • Forward and Reverse: Range 2
    8 mph
  • Forward and Reverse: Range 3
    17 mph
  • Forward and Reverse: Range 4
    25 mph
  • Note
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
  • Forward and Reverse - Range 1*
    1-13 km/h (0.6-8 mph)
  • Forward and Reverse - Range 2
    8 mile/h
  • Forward and Reverse - Range 3
    17 mile/h
  • Forward and Reverse - Range 4
    25 mile/h
  • Note
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Cab

  • ROPS
    ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
  • Declared Sound Levels
    – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
  • Note
    * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl
  • Note
    The Blue Angel environmental label is an optional attachment for Europe only.
  • ROPS
    ISO 3471:2008
  • Declared Sound Levels
    Declared Sound Levels
    – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
    – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
  • Note (1)
    *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows clo
  • Note (2)
    The Blue Angel environmental label is an optional attachment for Europe only.
  • FOPS
    ISO 3449:2005 LEVEL II

Operating Specificatons

  • Full Turn Tip Load
    17580 lb

Power Train

  • Front Axle
    Fixed
  • Front Axle - Traction Aid*
    Locking differential (standard)
  • Rear Axle
    Oscillating
  • Rear Axle - Oscillation Angle by Tire Size - 17.5 R25
    ± 13.5 degrees
  • Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
  • Note
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Rear Axle: Traction Aid (optional)
    Limited slip differential
  • Brakes: Service
    Inboard wet disc
  • Brakes: Park
    Spring applied hydraulically released
  • Note
    Offset rims available to meet European roading requirements.
  • Note
    **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
  • Brakes - Parking
    Spring applied hydraulically released
  • Brakes - Service
    Inboard wet disc
  • Front Axle
    Fixed
  • Front Axle - Traction Aid**
    Locking differential (standard)
  • Note (1)
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Note (2)
    Offset rims available to meet European roading requirements.
  • Note (3)
    *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
  • Rear Axle
    Oscillating
  • Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
    ± 10.5 degrees
  • Rear Axle - Traction Aid - Optional
    Limited slip differential

Operating Specifications

  • Full Turn Tip Load
    17350 lb
  • Note
    Aggregate Handler machine equipped with side guards and roading fenders.

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Standard Equipment:

  • Power Train
    • Axle seal guards
    • Auto idle shut down feature
    • Cat C7.1 engine
      – Power Modes (Standard and Performance)
      – Power by Range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Filtered crankcase breather
      – Diesel particulate filter (Fit for Life)
    • Coolant protection to –34° C (–29° F)
    • Differential lock in front axle
    • Dry type air cleaner
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Fuel water separator
    • Hydraulically driven demand cooling fan
    • Intelligent hydrostatic transmission
      – Power train modes
      – Directional Shift Aggressiveness
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Lubed for life driveshafts
    • Parking brake, electric
    • Wide spaced 6 fins per inch cooling package
    • S·O·SSM sampling ports
    • Throttle lock and maximum speed limiter
  • Hydraulics
    • Automatic lift, lower and tilt kickouts
    • Bucket and Fork Modes, adjustable in-cab
    • Cylinder damping at kickout and end stops
    • Fine Mode control in Fork Mode
    • Hydraulic Response setting
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • Electrical
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24 volt system
    • Back-up alarm
    • Emergency shutdown switch
    • Heavy duty gear reduction starter
    • Product Link PRO with subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, enclosed and pressurized
    • Cup holders
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Gauges
      – Digital hour meter, odometer, tachometer, ground speed and direction indicator
      – Engine coolant temperature gauge
      – Fuel and Diesel Exhaust Fluid level
      – Hydraulic oil temperature gauge
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Operator warning system indicators
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted controls, adjustable
    • Sliding glass on the side windows
    • Column mounted multi function control – lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt and telescopic steering wheel
    • Wet arm wiper/washer, front and rear
  • Other Standard Equipment
    • Large-access enclosure doors
    • Parallel lift loader linkage
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures

Optional Equipment:

  • Optional Equipment
    • Antifreeze/coolant, extended-life
    • Autolube, integrated in secondary display
    • Auxiliary flow, third function
    • Axles, differential, limited slip, rear
    • Axles, elevated breathers
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe):
      – Automatic blower control
      – Electrically adjustable heated mirrors (2)
      – LED interior lighting
      – Secondary display to adjust settings
    • Ride control adjustable speed activation
    • Preventative maintenance reminders
    • Integrated help function (22 languages available)
    • Sunscreen, front and rear
    • Camera, rearview (standard in Europe)
    • Camera, front view (May be required for local EU requirements.)
    • Cold start package:
      – Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guards
      – Power train, (lower, side, driveshaft and crankcase)
      – Windshield and lights
      – Cylinders, tilt and steering
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Lights, roading LED
    • Rear Object Detection
    • Radio packages:
      – Radio ready with Bluetooth
      – Radio, AM/FM with Bluetooth and clock
      – Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
    • Seats:
      – Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
    • Steering:
      – Dual mode and Secondary
    • Tires:
      – Bias ply, 17.5, 20.5-25
      – Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
    • Work tools