Your Rental Location
  • Request A Quote

24 Motor Grader

Maximize your minesite’s productivity with the Cat® 24 motor grader. By building and maintaining haul roads, the 24 motor grader is designed to help you get more work done with lower owning and operating costs. Stay safe and comfortable with the updated cab.

Videos not available for this product.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Engine Model Cat C27 ACERT
  • Gross Vehicle Weight – Base*: Total 157769 lb
  • Gross Vehicle Weight – Base*: Front Axle 43858 lb
  • Gross Vehicle Weight – Base*: Rear Axle 113910 lb

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Engine Model
    Cat C27 ACERT
  • Bore
    5.4 in
  • Stroke
    6 in
  • Emissions
    Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
  • Torque Rise
    191
  • Peak Net Torque
    2417 lbf-ft
  • Number of Cylinders
    12
  • Base Power (1st gear) – Net (Tier 4)
    535 hp
  • Maximum Altitude at Full Power (Tier 4)
    10000 ft
  • Maximum Altitude at Full Power (Tier 2)
    15000 ft
  • Standard – Fan Speed
    1,325 rpm
  • Standard Capability
    122 ° F
  • Displacement
    1648 in3
  • Note
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note
    Optimized VHP Plus is standard for the 24.
  • Note
    Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Note
    Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
  • Base Power (1st Gear) - Net
    535 HP
  • Speed at Rated Power
    1,800 rpm
  • Engine Model
    Cat C27 ACERT
  • Bore
    5.4 in
  • Stroke
    6 in
  • Base Power (1st gear) - Net (Tier 4)
    535 HP
  • Emissions
    Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
  • Maximum Altitude - Full Power (Tier 2)
    15000 ft
  • Maximum Altitude - Full Power (Tier 4)
    10000 ft
  • Note (1)
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note (2)
    Optimized VHP Plus is standard for the 24.
  • Note (3)
    Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Note (4)
    Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
  • Peak Net Torque
    2417 ft·lbf
  • Standard - Fan Speed
    1,300 rpm
  • Standard Capability
    122 °F
  • Torque Rise
    19%
  • Displacement
    1648 in³
  • Number of Cylinders
    12
  • Stroke
    6 in
  • Bore
    5.4 in
  • Engine Model
    Cat C27
  • Base Power (1st Gear) - Net
    535 HP
  • Speed at Rated Power
    1,800 rpm
  • Base Power (1st gear) - Net (Tier 4)
    535 HP
  • Emissions
    Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
  • Maximum Altitude - Full Power (Tier 2)
    15000 ft
  • Maximum Altitude - Full Power (Tier 4)
    10000 ft
  • Note (1)
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note (2)
    Optimized VHP Plus is standard for the 24.
  • Note (3)
    Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Note (4)
    Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
  • Peak Net Torque
    2417 ft·lbf
  • Standard - Fan Speed
    1,300 rpm
  • Standard Capability
    122 °F
  • Torque Rise
    19%
  • Displacement
    1648 in³
  • Number of Cylinders
    12
  • Net Power - EEC 80/1269
    535 HP

Weights

  • Gross Vehicle Weight – Base*: Total
    157769 lb
  • Gross Vehicle Weight – Base*: Front Axle
    43858 lb
  • Gross Vehicle Weight – Base*: Rear Axle
    113910 lb
  • Gross Vehicle Weight – Typically Equipped: Total
    161695 lb
  • Gross Vehicle Weight – Typically Equipped: Front Axle
    44466 lb
  • Gross Vehicle Weight – Typically Equipped: Rear Axle
    117229 lb
  • Operating Weight - Typically Equipped
    161695 lb
  • Note
    *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab.
  • Gross Vehicle Weight - Base* - Front Axle
    43858 lb
  • Gross Vehicle Weight - Base* - Rear Axle
    113910 lb
  • Gross Vehicle Weight - Base* - Total
    157769 lb
  • Gross Vehicle Weight - Typically Equipped - Front Axle
    44466 lb
  • Gross Vehicle Weight - Typically Equipped - Rear Axle
    117229 lb
  • Gross Vehicle Weight - Typically Equipped - Total
    161695 lb
  • Note
    *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab.
  • Operating Weight - Typically Equipped
    161695 lb
  • Gross Vehicle Weight - Base* - Front Axle
    43858 lb
  • Gross Vehicle Weight - Base* - Rear Axle
    113910 lb
  • Gross Vehicle Weight - Base* - Total
    157769 lb
  • Gross Vehicle Weight - Typically Equipped - Front Axle
    44466 lb
  • Gross Vehicle Weight - Typically Equipped - Rear Axle
    117229 lb
  • Gross Vehicle Weight - Typically Equipped - Total
    161695 lb
  • Note
    *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab.

Front Frame Structure

  • Circle – Outer Diameter
    104 in
  • Front Axle – Wheel Lean, Left/Right
    18°
  • Front Axle – Total Oscillation per Side
    32°
  • Circle - Outer Diameter
    104 in
  • Front Axle - Total Oscillation per Side
    32°
  • Front Axle - Wheel Lean - Left/Right
    18°
  • Circle - Outer Diameter
    104 in
  • Front Axle - Total Oscillation per Side
    32°
  • Front Axle - Wheel Lean - Left/Right
    18°

Moldboard

  • Blade Height
    40 in
  • Thickness
    2 in
  • Blade Width
    24 ft
  • Blade Height
    40 in
  • Thickness
    2 in
  • Blade Width
    24 ft
  • Blade Height
    40 in
  • Thickness
    2 in

Blade Range

  • Blade Tip Range – Forward
    40°
  • Maximum Shoulder Reach Outside of Rear Tires – Left
    121 in
  • Maximum Lift Above Ground
    16.1 in
  • Circle Centershift - Right
    17.2 in
  • Circle Centershift - Left
    31.7 in
  • Moldboard Sideshift - Right
    45.3 in
  • Moldboard Sideshift - Left
    38.2 in
  • Blade Tip Range - Forward
    40°
  • Blade Tip Range - Backward
  • Maximum Lift Above Ground
    16.1 in
  • Maximum Depth of Cut
    21.7 in
  • Maximum Shoulder Reach Outside of Rear Tires - Left
    125 in
  • Maximum Shoulder Reach Outside of Rear Tires - Right
    125 in
  • Maximum Depth of Cut
    21.7 in
  • Blade Tip Range - Backward
  • Blade Tip Range - Forward
    40°
  • Circle Centershift - Left
    31.7 in
  • Circle Centershift - Right
    17.2 in
  • Maximum Lift Above Ground
    16.1 in
  • Maximum Shoulder Reach Outside of Rear Tires - Left
    125 in
  • Maximum Shoulder Reach Outside of Rear Tires - Right
    125 in
  • Moldboard Sideshift - Left
    38.2 in
  • Moldboard Sideshift - Right
    45.3 in

Air Conditioning System

  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne.
  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne.
  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne.

Machine Weight

  • Weight*
    161695 lb

LOWER MAINTENANCE COSTS

  • The improved power train rebuild life, new modular design and new machine protection features can save you up to 2,400 servicing hours over the life of the machine.
  • Cat C27 engine, 533 mm (21 in) transmission and lower power train provide 33 percent additional machine life before needing to be rebuilt.
  • New, innovative main component modular design means they can be removed and installed quicker and easier. Transmission and cooling package can be removed up to 70 percent faster than the 24M.
  • Fluid Service Center provides single location at ground level for access to engine, transmission, hydraulic oil and coolant. This feature, along with clustered filters and extended service intervals, saves you maintenance time and operating costs.
  • Hoses and electrical harnesses are split at easily accessible bulkhead locations allowing your service technicians to work with smaller sections easier and faster.
  • Ok-to-Start and Critically Low Fluid monitoring systems protect your machine by providing electronic verification of fluid levels and alerting you when low fluid levels are detected, protecting your machine.

MAXIMIZE PERFORMANCE

  • Cat C27 engine provides enhanced altitude capabilities with no derate up to 3048 m (10,000 ft) for U.S. EPA Tier 4/EU Stage IV emission standards and 4572 m (15,000 ft) for equivalent Tier 2/Stage II emissions.
  • An 11 percent weight increase helps provide more traction and blade down pressure than the 24M.
  • Consistent Power-to-the-Ground changes real-time engine power levels to offset cooling fan losses resulting in best performance at all times independent of ambient conditions.

ENSURING A SAFE JOB SITE

  • Fifteen tie-off points located around engine enclosure and cab provide secure tie off hooks protecting you and your technicians when performing service operations.
  • Optional Working at Heights package adds an extra layer of safety by providing handrails and hand holds to improve access and safety.
  • The 24 is a Fire Suppression-Ready machine which means you can easily install a fire suppression system to further protect your investment.
  • Standard rearview camera provides better visibility from the cab to behind the machine while optional front-facing cameras provide enhanced forward and side visibility.
  • Standard seat belt indicator provides visual/audible alerts when the seat belt is not in use. The 24 is pre-wired so you can easily install a beacon on top of the cab to indicate seat belt usage.

TECHNOLOGY THAT PUSHES PROFITS

  • The 24 features asset protection and performance-improving technologies including: engine overspeed/underspeed, second generation steering system, articulation eStop, ripper auto stow, implements lock out and circle angle limits, to name a few.
  • Standard Cat GRADE with Cross Slope improves operator productivity and haul road quality and durability by helping maintain desired cross slope for appropriate water drainage by automatically controlling one side of the blade.
  • The Cat 24 is MineStar™ ready and includes Cat Product Link™ Elite and VIMS™ to help optimize equipment management, remote monitoring capabilities, machine availability and component life while reducing both repair cost and the risk of a catastrophic failure.

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Engine: C27
    • 24-volt electric start
    • Air filters, dual with precleaner
    • Automatic dust ejector
    • Ether starting aid
    • Automatic fan, suction with hydraulic demand
    • Drive, near zero fan speed
    • Torque divider, lock-up
    • Transmission, 533 mm (21 in) planetary powershift with 6F/3R, ECPC
    • Enhanced auto-shift, APECS
    • Directional shift management
    • Differential, lock/unlock (auto/manual)
    • Parking brake, multi-disc, sealed and oil cooled
    • Fast fill (fuel, hydraulic, transmission, coolant)
    • Fuel priming pump, electric
    • Electronic prescreener water/fuel
    • Prescreener separator, water/fuel
    • Thermal shields
    • Fluid monitoring (engine, transmission, hydraulic, differential)
  • Electrical
    • Alarm, back-up
    • Alternator, 150 ampere, sealed, filtered air intake
    • Maintenance free batteries, 12V (4), 200 amp-hour
    • Heavy duty starter (two)
    • Electrical hydraulic valves, base 8
    • Electrical system, 24 volt
    • Lights, reversing, stop, tail, turn
    • Starter receptacle plug-in
  • Operator Environment
    • Air conditioner and heater sound suppressed, pressurized cab 73 dB(A) ISO 6394 at 70 percent fan speed
    • Adjustable armrest
    • Electro-hydraulic controls
    • Electronic throttle control
    • Automatic return to center articulation
    • 10 inch digital touch screen information display
    • Rear vision camera
    • Coat hook
    • Comfort suspension seat, cloth-covered
    • Front fixed laminated window glass with intermittent wiper, sides (two), rear with wiper/washer
    • Retractable seat belt, 76 mm (3 in)
    • Hydraulic implement lockout for roading and servicing
  • Technology Products
    • VIMS - 3G
    • Grade control X slope
    • Overspeed/underspeed protection
    • Second generation steering system
    • Ripper auto stow
    • Circle angle limits
  • Safety And Security
    • Fire suppression ready
    • Circle drive slip clutch
    • Locking doors
    • Ground level engine shutdown
    • Secondary steering
    • Working at heights tie-off anchors
    • Rear tandem access platforms
    • Seat belt indicator
  • Ground Engaging Tools
    • Moldboard, 7315 mm x 1067 mm x 50 mm (24 ft x 42 in x 2 in)
    • Rear ripper with seven shank capacity, three shanks/tips provided
  • Other Standard Equipment
    • Blade lift accumulators
    • Lincoln Centro-Matic Autolube System
    • Drawbar, eight shoe with replaceable wear strips
    • Fuel tank, 908 L (240 gal) fast fill
    • Ground level fueling
    • Push plate-counterweight
    • SOS ports, engine, hydraulic, transmission, coolant, fuel
    • Hydraulic and electric bulkheads
    • Fluid service center: engine, transmission, hydraulic oil, and coolant ports

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Heated seat
    • Heated and ventilated seat
    • Air horn
    • Radio Bluetooth
    • Radio Satellite Sirius
    • Outside mounted mirrors
    • Heated outside mounted mirrors 24V
    • Rear view camera additional dedicated monitor
    • Auto articulation
  • Power Train
    • Bar and plate duel core radiator
    • Precleaner Sy-klone
    • Control blade variable float
  • Guards
    • Guard Package including mud guard (two) bottom, eng. Compartment and front axle (two)
    • Tandem fenders with mounted guardrails
    • Sound suppression guard package
  • Electrical
    • Halogen operator access lighting package
    • LED operator access lighting package
    • Working halogen lighting package
    • Working LED lighting package
    • LED warning strobe light
  • Safety
    • Duel Access CAB platform
    • Front facing cameras (two)
    • Fire suppression system
    • Wheel chocks with mounting bracket
  • Other Attachments
    • VIMS and Satellite Product Link
    • VIMS and Duel (Cell/Satellite) Product Link
    • Rims Only option, 25" x 29" MP
  • Work Tools/g.e.t.
    • Flat 406 mm x 60 mm (16 in x 2.36 in) cutting edge
    • Serrated 406 mm x 75 mm (16 in x 2.95 in) cutting edge
    • Miningbit 355.6 mm x 75 mm (14 in x 2.13 in) cutting edge system
    • Tooth, ripper
  • Fluids
    • Cold Weather Package - Arctic hydraulic oil, engine, hydraulic, transmission and coolant heater (240V/30A)
was successfully added to the cart! Request Quote