Your Rental Location
  • Request A Quote

14 Motor Grader

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 (14M3) features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

360 View not available for this product.

Add to Cart
SPECIFICATION SUMMARY
  • Engine Model Cat C13 ACERT VHP
  • Gross Vehicle Weight – Base* – Total 50980 lb
  • Gross Vehicle Weight – Base* – Front Axle 13994 lb
  • Gross Vehicle Weight – Base* – Rear Axle 36994 lb

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Engine Model
    Cat C13 ACERT VHP
  • Bore
    5.1 in
  • Stroke
    6.2 in
  • Emissions
    Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
  • Torque Rise
    41%
  • Maximum Torque (VHP Plus)
    1137 lbf-ft
  • Number of Cylinders
    6
  • Maximum Altitude at Full Power
    13900 ft
  • Maximum Altitude at Full Power (Tier 3)
    14349 ft
  • Maximum Altitude at Full Power (Tier 2)
    12049 ft
  • High Ambient – Fan Speed – Standard
    1,400 rpm
  • High Ambient – Fan Speed – Maximum
    1,600 rpm
  • Standard – Fan Speed: Minimum
    550 rpm
  • Standard Capability
    122 ° F
  • Displacement
    763 in3
  • Note
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note
    Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
  • Base Power (1st Gear) - Net
    238 HP
  • Speed at Rated Power
    1,850 rpm
  • Standard - Fan Speed - Maximum
    1,600 rpm
  • Standard - Fan Speed - Minimum
    550 rpm
  • Standard Capability
    122 °F
  • Note
    Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Standard – Fan Speed: Maximum
    1,600 rpm
  • Engine Model
    Cat C13
  • Bore
    5.1 in
  • Stroke
    6.2 in
  • Emissions
    Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
  • Maximum Altitude - Full Power
    13900 ft
  • Maximum Altitude - Full Power (Tier 2)
    12049 ft
  • Maximum Altitude - Full Power (Tier 3)
    14349 ft
  • Maximum Torque - VHP Plus
    1137 lb/ft
  • Note (1)
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note (2)
    Optimized VHP Plus is standard for the 14M3.
  • Note (3)
    Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Note (4)
    Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
  • Torque Rise
    41%
  • Displacement
    763 in³
  • Number of Cylinders
    6
  • Note (5)
    Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Base Power (1st Gear) - Net
    238 HP
  • Engine Model
    Cat C13
  • Bore
    5.1 in
  • Stroke
    6.2 in
  • Speed at Rated Power
    1,850 rpm
  • Note (3)
    Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Standard Capability
    122 °F
  • Note (2)
    Optimized VHP Plus is standard for the 14M3.
  • Torque Rise
    41%
  • Maximum Altitude - Full Power
    13900 ft
  • Maximum Torque - VHP Plus
    1137 lb/ft
  • Emissions
    Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
  • Maximum Altitude - Full Power (Tier 3)
    14349 ft
  • Maximum Altitude - Full Power (Tier 2)
    12049 ft
  • Note (1)
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Standard - Fan Speed - Minimum
    550 rpm
  • Note (4)
    Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
  • Displacement
    763 in³
  • Number of Cylinders
    6
  • Note (5)
    Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Standard - Fan Speed - Maximum
    1,600 rpm

Weights

  • Gross Vehicle Weight – Base* – Total
    50980 lb
  • Gross Vehicle Weight – Base* – Front Axle
    13994 lb
  • Gross Vehicle Weight – Base* – Rear Axle
    36994 lb
  • Gross Vehicle Weight – Maximum – Total
    67980 lb
  • Gross Vehicle Weight – Maximum – Front Axle
    21753 lb
  • Gross Vehicle Weight – Maximum – Rear Axle
    46224 lb
  • Gross Vehicle Weight – Typically Equipped – Total
    57250 lb
  • Gross Vehicle Weight – Typically Equipped – Front Axle
    15245 lb
  • Gross Vehicle Weight – Typically Equipped – Rear Axle
    42005 lb
  • Operating Weight - Typically Equipped
    57250 lb
  • Note
    *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
  • Gross Vehicle Weight - Base* - Front Axle
    13994 lb
  • Gross Vehicle Weight - Base* - Rear Axle
    36994 lb
  • Gross Vehicle Weight - Base* - Total
    50980 lb
  • Gross Vehicle Weight - Typically Equipped - Front Axle
    15245 lb
  • Gross Vehicle Weight - Typically Equipped - Rear Axle
    42005 lb
  • Gross Vehicle Weight - Typically Equipped - Total
    57250 lb
  • Note
    *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
  • Operating Weight - Typically Equipped
    57250 lb
  • Gross Vehicle Weight - Base* - Total
    50980 lb
  • Gross Vehicle Weight - Base* - Front Axle
    13994 lb
  • Gross Vehicle Weight - Typically Equipped - Total
    57250 lb
  • Gross Vehicle Weight - Typically Equipped - Rear Axle
    42005 lb
  • Gross Vehicle Weight - Typically Equipped - Front Axle
    15245 lb
  • Gross Vehicle Weight - Base* - Rear Axle
    36994 lb
  • Note
    *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Frame

  • Circle – Outer Diameter
    71.7 in
  • Front Axle – Wheel Lean, Left/Right
    17.1°
  • Front Axle – Total Oscillation per Side
    32°
  • Circle - Outer Diameter
    71.7 in
  • Front Axle - Total Oscillation per Side
    32°
  • Front Axle - Wheel Lean - Left/Right
    17.1°
  • Circle - Outer Diameter
    71.7 in
  • Front Axle - Wheel Lean - Left/Right
    17.1°
  • Front Axle - Total Oscillation per Side
    32°

Moldboard

  • Blade Width with End Bits
    169 in
  • Blade Width without End Bits
    164 in
  • Arc Radius
    16.3 in
  • Throat Clearance
    4.6 in
  • Blade Width
    14 ft
  • Arc Radius
    16.3 in
  • Throat Clearance
    4.6 in
  • Blade Height - With Cutting Edge
    24.9 in
  • Blade Height - Without Cutting Edge
    23 in
  • Blade Width - With End Bits
    169 in
  • Blade Width - Without End Bits
    164 in
  • Blade Width
    14 ft
  • Arc Radius
    16.3 in
  • Throat Clearance
    4.6 in
  • Blade Width - With End Bits
    169 in
  • Blade Height - With Cutting Edge
    24.9 in
  • Blade Width - Without End Bits
    164 in
  • Blade Height - Without Cutting Edge
    23 in

Blade Range

  • Blade Tip Range – Forward
    40°
  • Circle Centershift - Right
    20.5 in
  • Circle Centershift - Left
    25.6 in
  • Moldboard Sideshift - Right
    31.1 in
  • Moldboard Sideshift - Left
    29.1 in
  • Blade Tip Range - Forward
    40°
  • Blade Tip Range - Backward
    5°
  • Maximum Shoulder Reach Outside of Tires - Right
    78.9 in
  • Maximum Shoulder Reach Outside of Tires - Left
    73.6 in
  • Maximum Depth of Cut
    23.3 in
  • Maximum Lift Above Ground
    16.5 in
  • Maximum Depth of Cut
    23.3 in
  • Circle Centershift - Left
    25.6 in
  • Maximum Lift Above Ground
    16.5 in
  • Circle Centershift - Right
    20.5 in
  • Blade Tip Range - Backward
    5°
  • Maximum Shoulder Reach Outside of Tires - Right
    78.9 in
  • Moldboard Sideshift - Right
    31.1 in
  • Moldboard Sideshift - Left
    29.1 in
  • Maximum Shoulder Reach Outside of Tires - Left
    73.6 in
  • Blade Tip Range - Forward
    40°

Air Conditioning System

  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Service Refill Capacities

  • Hydraulic System
    33 gal (US)
  • Fuel Tank
    109.9 gal (US)
  • Cooling System
    15.9 gal (US)
  • Circle Drive
    1.8 gal (US)

TECHNOLOGY THAT GETS WORK DONE

  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.

MOVE MORE, BURN LESS

  • Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
  • Standard VHP Plus provides ideal amount of power in all gears.
  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.

MORE CONTROL AND EFFICIENCY

  • Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.

DESIGNED FOR OPERATORS

  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.

BUILT-IN SAFETY FEATURES

  • Optional rear vision camera enhances sight to rear of machine.
  • Electrical disconnect and engine shutoff switches are ground level.
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
  • Optional seat belt indicator promotes safe operating habits.

SAVE MAINTENANCE TIME

  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Joystick, power adjustable armrests
    • Air conditioner with heater
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
    • Gauges, machine level
    • Message display
    • Joystick gear selection
    • Joystick hydraulic controls for implements, steering, transmission
    • Ladders, cab, left and right side
    • Lights, left and right side lights
    • Lights, night time cab, LED
    • Meter, hour, digital
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready, entertainment
    • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
    • Seat, mechanical suspension, cloth
    • Storage compartments
    • Throttle control, electronic
  • Power Train
    • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
    • Articulation, automatic Return-to-Center
    • Air-to-Air After Cooler (ATAAC)
    • Auto Diff Lock
    • Brake wear indication
    • Brakes, oil disc, four-wheel, hydraulic
    • Consistent power to ground
    • Monitoring system
    • Clutch, circle drive slip
    • Differential, lock/unlock*
    • Drain, engine oil, ecology
    • Demand fan, hydraulic
    • Engine ECO Mode
    • Ether starting aid
    • Fuel tank, ground level
    • Fuel-water separator
    • Hydraulic demand fan
    • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
    • Optimized VHP
    • Parking brake - multi disc, sealed, oil-cooled
    • Priming pump, fuel
    • Sediment drain, fuel tank
    • Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
    • Transmission, 8F/6R, power shift, direct drive
  • Electrical
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, HD, 1,125 CCA
    • Breaker panel
    • Electrical system, 24V*
    • Belt, serpentine, automatic tensioner
    • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
    • Product Link
    • Starter, electric
    • Service lights, enclosure, rear, LED
  • Safety
    • Alarm, back up
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Lockout, hydraulic implement for roading
    • Operator Not Present Monitoring system
    • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air horn
    • Heated door
    • Mirrors high visibility
    • Mirrors, outside heated 24V
    • Mirrors, outside mounted
    • Seat, heated
    • Seat, heated/ventilated
    • Rearview camera
    • Seat belt indicator
  • Power Train
    • Transmission, autoshift
    • Engine, compression brake
  • Technology
    • Cat GRADE with Cross Slope
    • Stable Blade
    • Advanced Control Joysticks
    • Auto Articulation
  • Guards
    • Debris guard
    • Front axle cylinder guards
    • Rear fenders
    • Sound suppression, engine enclosure and transmission
    • Transmission guard
    • Accumulators, blade lift
    • Fast fill fuel, 378.5 L/min (100 gal/min)
    • Metallic DCM wear strips
  • Electrical
    • Light, LED, warning strobe
    • Lights, front headlights high
    • Lights, front headlights low
    • Mounting, for warning light
    • Working lights halogen
    • Working lights LED
  • Safety
    • Additional rearview camera and monitor
    • Machine security system key
  • Other Attachments
    • Moldboard, 4.9 m (16 ft)
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
    • Product Link satellite, cellular
    • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
    • Snow wing, mounting frame ready
    • Fast fill
  • Work Tools/g.e.t.
    • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
    • Push block, counterweight
    • Ripper, rear
    • Tooth, ripper
  • Fluids
    • Coolant, -51 degrees C (-60 degrees F)