950H Wheel Loader
Performance you can feel with the capability to work in the most demanding applications. Unmatched operator comfort and efficiency in a world class cab. Revolutionary electronics and hydraulics for low-effort operation. Increased productivity with lower owning and operating costs.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
- Net Power - ISO 9249 197.0 hp
- Operating Weight 40435.0 lb
- Bucket Capacities 2.5-3.5 m3 3.25-4.5 yd3
- Engine Model Cat® C7 ACERT™
PRICE (USD)
Call 800-637-5000 for rate information
Engine
-
Net Power - ISO 9249197.0 hp
-
Engine ModelCat® C7 ACERT™
-
Net Power - 80/1269/EEC197.0 hp
-
Flywheel Power197.0 hp
-
Gross Power - SAE J1995216.0 hp
-
Net Power - SAE J1349195.0 hp
-
Bore4.33 in
-
Stroke5.0 in
-
Displacement439.0 in3
-
Peak Torque - 1,400 rpm - Net669 ft-lb
-
Total Torque Rise54 %
-
Net Power - ISO 9249197 HP
-
Engine ModelCat? C7 ACERT?
-
Net Power - 80/1269/EEC197 HP
-
Flywheel Power197 HP
-
Gross Power - SAE J1995216 HP
-
Net Power - SAE J1349195 HP
-
Bore4.33 in
-
Stroke5 in
-
Displacement439 in³
Weights
-
Operating Weight40435.0 lb
-
Operating Weight40435 lb
Buckets
-
Bucket Capacities2.5-3.5 m3 3.25-4.5 yd3
-
Max Bucket Capacity4.5 yd3
-
Bucket Width9.6 ft
-
Capacity - Reference bucket4.0 yd3
-
Type - Reference bucketGeneral purpose
-
Breakout force of Reference bucket37125.0 lb
-
Bucket Capacities2.5-3.5 m3 3.25-4.5 yd3
-
Maximum Bucket Capacity4.5 yd³
-
Bucket Width9.6 ft
-
Capacity - Reference bucket4 yd³
-
Type - Reference bucketGeneral purpose
-
Breakout Force - Reference Bucket37125 lb
Transmission
-
Forward 14.3 mph
-
Forward 27.9 mph
-
Forward 313.9 mph
-
Forward 423.0 mph
-
Reverse 14.7 mph
-
Reverse 28.6 mph
-
Reverse 315.2 mph
-
Reverse 424.9 mph
-
Forward - 14.3 mile/h
-
Forward - 27.9 mile/h
-
Forward - 313.9 mile/h
-
Forward - 423 mile/h
-
Reverse - 14.7 mile/h
-
Reverse - 28.6 mile/h
-
Reverse - 315.2 mile/h
-
Reverse - 424.9 mile/h
Axles
-
FrontFixed front
-
RearOscillating +/- 13°
-
Maximum Single-Wheel Rise and Fall18.5 in
-
FrontFixed front
-
RearOscillating +/- 13?
-
Maximum Single-Wheel Rise and Fall18.5 in
Brakes
-
BrakesMeets required standards.
-
BrakesMeets required standards.
Hydraulic System
-
Hydraulic Cycle Time - Dump1.3 Seconds
-
Bucket/Work Tool System - Pump Output71 gal/min
-
Steering System - Pump TypePiston
-
Hydraulic Cycle Time - Raise6.2 s
-
Hydraulic Cycle Time - Lower, Empty, Float Down2.5 s
-
Hydraulic Cycle Time - Total10 s
-
Hydraulic Cycle Time - Dump1.3 s
Service Refill Capacities
-
Fuel Tank - Standard83.0 gal
-
Cooling System11.0 gal
-
Crankcase7.9 gal
-
Transmission9.0 gal
-
Differentials and Final Drives - Front9.5 gal
-
Differentials and Final Drives - Rear9.5 gal
-
Hydraulic Tank29.0 gal
-
Fuel Tank - Standard83 gal (US)
-
Cooling System11 gal (US)
-
Crankcase7.9 gal (US)
-
Transmission9 gal (US)
-
Differential - Final Drives - Front9.5 gal (US)
-
Differential - Final Drives - Rear9.5 gal (US)
-
Hydraulic Tank29 gal (US)
Cab
-
ROPS/FOPSMeets SAE and ISO standards.
-
ROPS/FOPSMeets SAE and ISO standards.
-
ROPS/FOPS2.45 ft
Tires
-
TiresChoose from a variety of tires to match your application.
-
TiresChoose from a variety of tires to match your application.
Operating Specifications
-
Dump Clearance9.59 ft
-
Breakout Force37125.0 lb
-
Static Tipping Load - Full Turn - Bucket24068 lb
-
Static Tipping Load - Full Turn - Forks9421 lb
-
Dump Clearance9.59 ft
-
Breakout Force37125 lb
Dimensions
-
Height to top of ROPS11.3 ft
-
Height to top of exhaust pipe11.05 ft
-
Height to top of hood8.08 ft
-
Ground clearance1.35 ft
-
Wheelbase10.99 ft
-
Center line rear axle to hitch5.5 ft
-
Dump angle at maximum lift48.2 Degrees
-
B-Pin Height - Standard13.1 ft
-
B-Pin Height - High-Lift14.73 ft
-
Centerline Rear Axle to Edge of Counterweight6.41 ft
-
B-Pin Height - Carry - Standard1.49 ft
-
B-Pin Height - Carry - High-Lift1.94 ft
-
Rack Back - Maximum Lift59.5 °
-
Rack Back - Carry45 °
-
Rack Back - Ground38.5 °
-
Height - Center Line of Axle2.45 ft
-
Height - Top of ROPS11.3 ft
-
Height - Top of Exhaust Pipe11.05 ft
-
Height - Top of Hood8.08 ft
-
Ground Clearance1.35 ft
-
Wheel Base10.99 ft
-
Centerline of Rear Axle to Hitch5.5 ft
-
Dump Angle at Maximum Lift48.2 °
RELIABILITY
DURABILITY
PRODUCTIVITY
VERSATILITY
OPERATOR COMFORT
OWNING AND OPERATING COSTS
SERVICEABILITY
Standard Equipment:
-
- Electrical
-
- Alarm, back-up
- Alternator, 80-amp brushless
- Batteries, maintenance-free (2) 950 CCA
- Ignition key; start/stop switch
- Lighting system, halogen (6 total)
- Main disconnect switch
- Starter, electric, heavy-duty
- Starting and charging system (24-volt)
-
- Operator Environment
-
- Bucket/work tool function lockout
- Cab, pressurized and sound-suppressed ROPS/FOPS
- Cigar lighter and ashtray (12-volt)
- Coat hook (2) with straps
- Computerized monitoring system
- Controls, electrohydraulic, lift and tilt function
- Heater and defroster
- Horn, electric (steering wheel/console)
- Light, dome (cab)
- Lunchbox, beverage holders and personal tray
- Mirror, rearview (internally mounted)
- Seat, Cat Comfort (cloth) with air suspension
- Seat belt, retractable, 51 mm (2") wide
- Steering column, adjustable angle (SW-CCS) and length (CCS)
- Wet-Arm wipers and washers, front and rear
- Window, sliding (left and right side)
-
- Power Train
-
- Brakes, full hydraulic enclosed wet-disc with Integrated Braking System (IBS) and brake wear indicator
- Engine, Cat C7 with ACERT Technology and ATAAC
- Fan, radiator, electronically controlled, hydraulically driven, temperature sensing, on demand
- Filters, fuel, primary/secondary
- Filters, engine air, primary/secondary
- Fuel priming pump (electric)
- Fuel/water separator
- Muffler, sound suppressed
- Radiator, unit core
- Starting aid, air inlet heater
- Switch, transmission neutralizer lockout
- Torque converter, free wheel stator
- Transmission, automatic, planetary powershift (4F/4R)
- Variable Shift Control (VSC)
-
- Other
-
- Automatic bucket positioner
- Counterweight
- Couplings, Caterpillar O-ring face seal
- Doors, service access (locking)
- Ecology drains, engine, transmission and hydraulics
- Fenders, steel (front and rear)
- Guard, airborne debris
- Hitch, drawbar with pin
- Hood, non-metallic, power tilting
- Hoses, Caterpillar XT™
- Hydraulic oil cooler
- Kickout, lift and tilt, automatic (in-cab adjustable)
- Linkage, Z-bar, cast crosstube/tilt lever
- Oil sampling valves
- Product Link ready
- Remote diagnostic pressure taps
- Service center, electrical and hydraulic
- Sight gauges:
- Steering, load sensing
- Vandalism protection caplocks
-
- Tires, Rims, Wheels
-
- A tire must be selected from the mandatory attachments section. Base machine price includes an allowance based on a premium radial tire.
-
- Antifreeze
-
- Premixed 50% concentration of Extended Life Coolant with freeze protection to -34°C (-29°F)
Optional Equipment:
-
- Differentials
-
- Limited slip, front or rear
- NO-SPIN, rear
-
- Payload Control System
-
- Payload Control System Printer
-
- Special Machine Arrangements
-
- High Lift Arrangement, two- and three-valve
- Forest Machine Arrangement
- Scrap Handler Arrangement
- Sewer and Water Arrangement
- Waste Handler Arrangement
- Yard Loader Value Package