Your Rental Location
  • Request A Quote

992K Wheel Loader

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that’s both safe to operate, productive and durable. With the introduction of the K Series, we’ve enhanced the operator’s experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you’ll find everything that’s important to your business in the 992K; safety, productivity, cost control and comfort for your people.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Net Power 814 hp
  • Operating Weight 220089 lb
  • Bucket Capacities 10.7-12.3 m3 (14-16 yd3)
  • Engine Model Cat® C32 ACERT™

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Net Power
    814 hp
  • Engine Model
    Cat® C32 ACERT™
  • Emissions (U.S. EPA Tier 4 Final): Net Power – SAE J1349
    814 hp
  • Bore
    5.7 in
  • Stroke
    6.4 in
  • Displacement
    1963.5 in3
  • Emissions (U.S. EPA Tier 4 Final): Rated Speed
    1750 rpm
  • Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
    900 HP
  • Emissions (U.S. EPA Tier 4 Final): Gross Power – ISO 14396
    884 hp
  • Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995
    814 HP
  • Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995
    3514 lb/ft
  • Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
    907 HP
  • Emissions (Tier 2 Equivalent): Net Power - SAE J1349
    814 HP
  • Emissions (Tier 2 Equivalent): Gross Power - ISO 14396
    884 HP
  • Emissions (Tier 2 Equivalent): Rated Speed
    1750 r/min
  • Emissions (Tier 2 Equivalent): Net Power - SAE J1995
    814 HP
  • Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995
    3537 lb/ft
  • Torque Rise
    30%
  • Note (Tier 4 Final) (1)
    These ratings apply at 1,750 rpm when tested under the specified standard conditions.
  • Note (Tier 4 Final) (2)
    Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
  • Note (Tier 2 Equivalent) (1)
    These ratings apply at 1,750 rpm when tested under the specified standard conditions.
  • Note (Tier 2 Equivalent) (2)
    Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
  • Net Power
    814 HP
  • Engine Model
    Cat® C32 ACERT™
  • Bore
    5.7 in
  • Stroke
    6.4 in
  • Displacement
    1963.5 in³
  • Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349
    814 HP
  • Emissions (U.S. EPA Tier 4 Final): Rated Speed
    1750 r/min
  • Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396
    884 HP
  • Torque Rise
    30%

Operating Specifications

  • Operating Weight
    220089 lb
  • Rated Payload – Standard (face material)
    24 tons
  • Rated Payload – High Lift (face material)
    21 tons
  • Bucket Capacity Range
    10.7-12.3 m3 (14-16 yd3)
  • Operating Weight – Standard
    220089 lb
  • Operating Weight – High Lift
    221847 lb
  • Operating Weight
    220089 lb
  • Rated Payload - High Lift (Moderate to High Digging Resistance)
    21 t
  • Rated Payload - Standard Lift (Moderate to High Digging Resistance)
    24 t
  • Operating Weight - High Lift
    221847 lb
  • Operating Weight - Standard
    220089 lb

Buckets

  • Bucket Capacities
    10.7-12.3 m3 (14-16 yd3)
  • Bucket Capacities
    10.7-12.3 m3 (14-16 yd3)

Transmission

  • Transmission Type
    Cat Planetary Power Shift
  • Forward 1
    4.3 mph
  • Forward 2
    7.4 mph
  • Forward 3
    12.6 mph
  • Reverse 1
    4.7 mph
  • Reverse 2
    8.1 mph
  • Reverse 3
    13.8 mph
  • Direct Drive – Forward 2
    8.0 mph
  • Direct Drive – Reverse 1
    4.9 mph
  • Direct Drive – Reverse 2
    8.8 mph
  • Direct Drive - Forward 1
    Disabled
  • Direct Drive - Forward 3
    14.2 mile/h
  • Direct Drive - Reverse 3
    15.4 mile/h
  • Transmission Type
    Cat Planetary Power Shift
  • Forward - 1
    4.3 mile/h
  • Forward - 2
    7.4 mile/h
  • Forward - 3
    12.6 mile/h
  • Reverse - 1
    4.7 mile/h
  • Reverse - 2
    8.1 mile/h
  • Reverse - 3
    13.8 mile/h
  • Direct Drive - Forward 2
    8 mile/h
  • Direct Drive - Reverse 1
    4.9 mile/h
  • Direct Drive - Reverse 2
    8.8 mile/h

Axles

  • Front
    Fixed
  • Rear
    Oscillating
  • Oscillation Angle
    10° ±, 8° ± with Stops
  • Front
    Fixed
  • Rear
    Oscillating
  • Oscillation Angle
    10° ±, 8° ± with Stops

Hydraulic System – Steering

  • Steering System – Circuit
    Pilot, Load Sensing
  • Steering System – Pump
    Piston, Variable Displacement
  • Maximum Flow @ 1,350 rpm
    95 gal/min
  • Steering Cut Off Pressure
    4500 psi
  • Steering Cycle Time (high idle)
    4.4 seconds

Hydraulic Cycle Time

  • Raise
    9.4 seconds
  • Dump
    1.8 seconds
  • Total Hydraulic Cycle Time
    19.3 seconds

Hydraulic System – Lift/Tilt

  • Maximum Flow at 1,850 rpm
    254 gal/min
  • Lift Cylinder – Bore
    11 in
  • Lift Cylinder – Stroke
    45.2 in
  • Tilt Cylinder – Bore
    10.5 in

Sound Performance

  • Operator Sound Pressure Level
    The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing Protection
    Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • Machine Sound Power Level – Standard Machine Configuration
    The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Machine Sound Power Level – Sound Suppressed Machine Configuration
    The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
  • Hearing Protection
    Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • Machine Sound Power Level - Standard Machine Configuration
    The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Operator Sound Pressure Level
    The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Machine Sound Power Level - Sound Suppressed Machine Configuration
    The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s

Brakes

  • Brakes
    Meet ISO 3450:2011
  • Brakes
    Meet ISO 3450:2011

Hydraulic Cycle Times

  • Rack Back
    4.4 s
  • Lower Float Down
    3.7 s
  • Dump
    1.8 s
  • Raise
    9.4 s
  • Total Hydraulic Cycle Time
    19.3 s

Hydraulic System - Steering

  • Steering Cycle Times - Low Idle
    6.4 s
  • Steering Cycle Times - High Idle
    4.4 s
  • Maximum Flow at 1,350 rpm
    95 gal/min
  • Steering Cut Off Pressure
    4500 psi
  • Steering System - Circuit
    Pilot, Load Sensing
  • Steering System - Pump
    Piston, Variable Displacement
  • Total Steering Angle
    86°

Hydraulic System - Lift/Tilt

  • Lift/Tilt System - Circuit
    Positive Flow Control
  • Lift/Tilt System - Pump
    Variable Displacement Piston
  • Relief Valve Setting - Lift/Tilt
    4500 psi
  • Tilt Cylinder - Stroke
    80.9 in
  • Lift Cylinder - Bore
    11 in
  • Lift Cylinder - Stroke
    45.2 in
  • Maximum Flow at 1,850 rpm
    254 gal/min
  • Tilt Cylinder - Bore
    10.5 in

Dimensions - Standard Lift - Approximate

  • Ground to Top of ROPS
    18.63 ft
  • Ground to Top of Exhaust Stacks
    17.22 ft
  • Ground to Top of Hood
    13.26 ft
  • Ground to Bumper Clearance
    3.86 ft
  • Rear Axle - Centerline to Bumper
    13.76 ft
  • Wheel Base
    19.32 ft
  • Maximum Overall Length
    52 ft
  • Ground to Lower Hitch Clearance
    2.24 ft
  • Ground to Center of Axles
    4.44 ft
  • Rack Back Angle - Ground Level
    43.4 degrees
  • Rack Back Angle - Carry
    52.7 degrees
  • B-Pin Height - Maximum Lift
    22.73 ft
  • Maximum Overall Height - Bucket Raised
    30.5 ft
  • Dump Angle at Maximum Lift
    50 degrees
  • Reach - Maximum Lift
    6.95 ft
  • Clearance at 50° Dump (Tooth Tip)
    14.7 ft
  • Rack Back Angle - Maximum Lift
    65 degrees
  • Tread Width
    10.83 ft

Dimensions – Standard Lift (Approximate)

  • Wheel Base
    19.32 ft
  • Rack Back Angle at Ground Level
    43.4 degrees
  • Dump Angle at Maximum Lift
    50 degrees

Dimensions - High Lift - Approximate

  • Ground to Top of ROPS
    18.63 ft
  • Ground to Top of Exhaust Stacks
    17.22 ft
  • Ground to Top of Hood
    13.26 ft
  • Ground to Bumper Clearance
    3.86 ft
  • Rear Axle - Centerline to Bumper
    13.76 ft
  • Wheel Base
    19.32 ft
  • Maximum Overall Length
    52.81 ft
  • Ground to Lower Hitch Clearance
    2.24 ft
  • Ground to Center of Axles
    4.44 ft
  • Rack Back Angle - Ground Level
    42.8 degrees
  • Rack Back Angle - Carry
    52.5 degrees
  • B-Pin Height - Maximum Lift
    24.58 ft
  • Maximum Overall Height - Bucket Raised
    33.08 ft
  • Dump Angle at Maximum Lift
    50 degrees
  • Reach - Maximum Lift
    6.86 ft
  • Clearance at 45° Dump (Tooth Tip)
    15.01 ft
  • Rack Back Angle - Maximum Lift
    65 degrees
  • Tread Width
    10.83 ft

Dimensions – High Lift (Approximate)

  • Wheel Base
    19.32 ft
  • Rack Back Angle at Ground Level
    42.8 degrees
  • Dump Angle at Maximum Lift
    50 degrees

Service Refill Capacities

  • Fuel Tank
    413 gal
  • Cooling Systems
    77 gal (US)
  • Engine Crankcase
    32 gal
  • Transmission
    45 gal
  • Differentials and Final Drives – Front
    95 gal
  • Differentials and Final Drives – Rear
    91 gal
  • Hydraulic System - Implement
    86 gal (US)
  • Hydraulic System - Steering
    42 gal (US)
  • AC Refrigerant
    6 lb
  • AC Oil
    0.071 gal (US)
  • Fuel Tank
    413 gal (US)
  • Transmission
    45 gal (US)
  • Differential - Final Drives - Front
    95 gal (US)
  • Differential - Final Drives - Rear
    91 gal (US)
  • Engine Crankcase
    32 gal (US)

Structures

Power Train

Hydraulics

Operator Station

Technology Solutions

Cat® MineStar System

Safety

Serviceability

Customer Support

Sustainability

Buckets and Ground Engaging Tools

System Match Efficiency

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Air-to-Air After Cooler (ATAAC)
    • Axle oil coolers (front and rear)
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
    • Case drain filters
    • Demand fan
    • Driveline, electro-hydraulic parking brake
    • Electric fuel priming pump
    • Engine Cat C32 ACERT
    • Ground level engine shutdown
    • Ground level fast fill fuel
    • Ground level transmission lockout
    • Ground level starter lockout
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Starting aid, ether, automatic
    • Throttle lock
    • Transmission, 533 mm (21 in) planetary powershift with 3F/3R with electronic control
  • Electrical
    • Alarm, back-up
    • Alternator, 150-amp
    • Batteries, low maintenance
    • Converter, 10-amp, 24V to 12V
    • Deutsch and amp seal terminal connectors
    • Ground level electrical disconnect
    • Ground level starting receptacle for emergency start
    • Light, warning strobe
    • Lights, front and rear, access stairway, turn signals/hazard lights
    • Starter, electric (heavy duty)
    • Starting and charging system, 24V, ECM diagnostic connector
  • Operator Environment
    • Air conditioner and heater with automatic temperature control
    • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use
    • Camera, rear vision
    • Cigar lighter
    • Coat hook
    • Electro-hydraulic tilt and lift controls
    • Horn, electric
    • Implement and steering lockouts
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat Comfort with air suspension
    • Seat belt, 2-point, 76 mm (3 in), minder
    • Steering and transmission lock lever
    • STIC control system
    • Tie-offs on ROPS
    • Tinted glass
    • Trainer seat with 76 mm (3 in) wide lap belt
    • Transmission gear indicator
    • VIMS (Vital Info Management System): – 3G with graphical information display – Cycle timer – External data port – Integral Cat Production Measurement (Cat PM)
    • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
  • Safety And Security
    • Fire suppression ready
  • Other Standard Equipment
    • Automatic lubrication system
    • Bumper service center
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Economy mode
    • Emergency platform egress
    • Fenders, steel (front and rear)
    • Fuel, fast fill
    • Grouped hydraulic pressure ports
    • Guards, power train and crankcase
    • Hitch, drawbar with pin
    • Hoses, Cat XT and XT-ES
    • Hydraulic oil cooler
    • Impeller clutch
    • Implement and steering ecology drains
    • Mufflers, under hood
    • Oil sampling valves
    • Piston pump case drain filters
    • Service center with ground level electrical and fluids service center
    • Sight gauges: – Steering oil level – Implement oil level – Transmission oil level – Coolant level
    • Stairway, left and right rear access
    • Starter lockout, bumper
    • Steering, load sensing
    • Tie-offs on ROPS
    • Toe kicks
    • Transmission lockout, bumper
    • Vandalism protection caplocks
    • Venturi stacks (2)

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • AM/FM/CD/MP3 radio
    • AM/FM/CD/MP3 radio with Bluetooth and satellite ready
    • Sun screen
  • Starting Aids
    • Engine coolant 120V heater
    • Engine coolant 240V heater
  • Machine Control And Guidance
    • Cat Terrain ready
  • Miscellaneous Attachments
    • Arctic antifreeze for protection to –50° C (–58° F)
    • Diagnostic lines
    • Roading fenders
    • Wheel chocks
was successfully added to the cart! Request Quote