569 SM/EHC Stationary Mount Knuckleboom Loader
Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.
Videos not available for this product.
360 View not available for this product.
SPECIFICATION SUMMARY
Engine
-
Gross Power100.0 hp
-
Gross Power100 HP
Weights
-
Operating Weight18545.0 lb
-
Operating Weight18545 lb
Service Refill Capacities
-
Fuel Tank125.0 gal
-
Fuel Tank125 gal (US)
Operating Specifications
-
Operating Weight18345.0 lb
-
Knuckleboom Length32.5 ft
-
Grapple Mounting Knuckle Length9 in
-
Swing Bearing - Diameter54 in
-
Swing Bearing - GearingExternal
-
Electric Motor100 HP
-
Electric Power Supply460 Volt:60 Hz
-
Operating Weight18345 lb
Hydraulic System
-
Cylinders - Live Heel152 mm X 102 mm (6 in X 4 in)
-
Cylinders - Main152 mm X 102 mm (6 in X 4 in)
-
Cylinders - Stick178 mm X 102 mm (7 in X 4 in)
-
Hydraulic Flow170/204/61 L/min (45/54/16 gpm)
-
Hydraulic Pressure - Swing2500 psi
-
Hydraulic Pressure - System2500 psi
-
Swing Speed7 r/min
-
Hydraulic Flow18545 lb
Dimensions
-
Maximum Reach36 ft
Operator Station
On standard loaders with operator's station, the hydraulic pilot joystick controls and rocker swing pedal are ergonomically designed for ease of operation and maximum loader control required for the high cycle millyard applications. The operator station is designed with comfort in mind. The spacious cabs feature a large, fully adjustable suspension seat with lumbar support. Fold-up armrests are fully adjustable to allow adjustment of the joystick controls to match the operator for ease of operation, increased performance. Excellent visibility of the work area is provided through large tinted cab windows. Overhead visibility is maximized through the large, tinted Lexan skylight. Operator protection is afforded through the front guard. This swing-out guard is designed for quick and simple access to allow cleaning of the front window.
Mounting System
The Resilient Pad Mounting System includes a set of special rubber isolators on each mounting fastener that absorbs stress in two directions. An additional hydraulic accumulator is built into the main boom cylinder circuit to further absorb peak-load shocks.
Enclosed Components
Weatherproof electric service panels include starters, controls, transformers, circuit breakers and fuse blocks.
Motor Options
Electric motors range in horsepower from 75 to 100 hp and are totally enclosed and rated for severe duty. Power supply wiring packages provide for 440V/60Hz US or 575V/60Hz Canadian service.
Boom Length Options
Heavy-duty boom options range in length from 7.6 m to 10.9m (25' to 36') for handling a variety of tree lengths.
Standard Equipment:
-
- Motor Power Supply
-
- Electric Motor, 74 kW (100 HP) @ 1800 RPM
- 460 Volt (60 Hz) Electric Power Supply
- Four (4) Ring High Voltage Collector Ring
- Service Panel, NEMA 12 Enclosure
- Pump Drive, Direct Through Flex Coupling
- Across-the-line Magnetic Starting System
- Turntable Power Supply Mounting
-
- Hydraulic System
-
- Three (3) In-Line Gear Pumps
- Radial Piston Swing Motor
- Continuous Rotation
- Electro Hydraulic (EHC) Controls
- Two Dual Element Return (3 mic)Filtration
- Filtration Bypass Indicators
- Diagnostic Nipples @ Pump for serviceability
-
- Booms
-
- 9.9 m (32'6”) Knuckleboom
- 22.8 cm (9”) Grapple Mounting Knuckle
-
- Structural
-
- Steel Mounting