6030 OEM
Cat Frontless Hydraulic Shovels are loaded with options–giving you the flexibility to match the machine front to your specific application. These purpose-built specialty machines can be sourced through Caterpillar OEM Solutions and our global network of auxiliary equipment manufacturers. Let us help you build your jobsite solution.
360 View not available for this product.
SPECIFICATION SUMMARY
- Batteries in series/parallel installation 4 × 210 Ah – 12V each; 420 Ah – 24V in total
- System voltage 24V
- Alternator Rating 2 × 150A
- Engine Model 2 × Cat® C27 ACERT™
Electrical System
-
Batteries in series/parallel installation4 × 210 Ah – 12V each; 420 Ah – 24V in total
-
System voltage24V
-
Alternator Rating2 × 150A
-
Alternator Rating2 × 150A
-
Batteries in Series/Parallel Installation4 × 210 Ah – 12V each; 420 Ah – 24V in total
-
System Voltage24V
Engine
-
Engine Model2 × Cat® C27 ACERT™
-
Gross power – SAE J19951140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
-
Net power – SAE J13491140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
-
EmissionsU.S. EPA flex (Tier 2)
-
EmissionsU.S. EPA flex (Tier 2)
-
Gross Power - SAE J19951140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
-
Net Power - SAE J13491140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
-
Engine Model2 × Cat® C27 ACERT™
Undercarriage
-
ComponentsCast double-grouser combined pad-links with bushings connected by hardened full floating pins
-
Bottom Rollers - Each Side7
-
Components (1)All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
-
Components (2)Fully hydraulic self-adjusting track tensioning system with membrane accumulator
-
Components (3)Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-
Components (4)Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
-
Gradeability - Travel Drives - Approximate64 %
-
Maximum Tractive Force367880 lb
-
Support Rollers - Each Side2 plus a skid plate in between
-
Track Pads - Each Side47
-
Travel Speed - 1st Stage - Maximum0.87 mile/h
-
Travel Speed - 2nd Stage - Maximum1.68 mile/h
-
Maximum Drawbar Pull - Forward367880 lb
Operator’s Cab
-
ComponentsFOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
-
ComponentsFold-away auxiliary seat with safety belt
Hydraulic Oil Cooling
-
Maximum Flow2 × 467 L/min (2 × 123 gal/min)
-
Diameter - Fan2 × 1220 mm (2 × 48 in)
-
Maximum Flow2 × 467 L/min (2 × 123 gal/min)
Hydraulic System with Pump Managing System
-
Main pumps - Maximum total oil flow4 × 552 L/min (4 × 146 gal/min)
-
Maximum pressure, travel swing pumps5220.0 psi
-
Swing pumps - Maximum flow (Diesel)2 × 394 L/min (2 × 104 gal/min)
-
Main Pumps4 × variable swash plate pumps
-
Maximum Pressure - Attachment4495 psi
-
Maximum Pressure - Swing Pumps5080 psi
-
Swing Pumps2 × reversible swash plate double pumps
-
Main Pumps - Maximum Total Oil Flow4 × 552 L/min (4 × 146 gal/min)
-
Maximum Pressure - Travel Swing Pumps5220 psi
-
Swing Pumps - Maximum Flow - Diesel2 × 394 L/min (2 × 104 gal/min)
Automatic Lubrication System
-
TypeDual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
-
Capacity of Grease Barrel120.0 gal
-
Capacity - Grease Barrel120 gal (US)
-
TypeDual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
Weight
-
Frontless Weight473970 lb
Track
-
Standard39.0 in
-
Extra Wide3.9 ft
-
Extra Wide3.9 ft
-
Standard39 in
Service Refill Capacities
-
Fuel Tank1339.0 gal
-
Hydraulic System (including tank)925.0 gal
-
Hydraulic Tank660.0 gal
-
Grease Tank120.0 gal
-
Fuel Tank1339 gal (US)
-
Grease Tank120 gal (US)
-
Hydraulic System - Including Tank925 gal (US)
-
Hydraulic Tank660 gal (US)
General
-
Engine Output - SAE J19951140 kW (1,530 hp)
-
Standard Bucket CapacityFace Shovel (heaped 2:1) - 16.5 m3 (21.6 yd3); Backhoe (heaped 1:1) - 17.0 m3 (22.2 yd3)
-
Operating WeightFace Shovel - 294 tonnes (324 tons); Backhoe - 296 tonnes (326 tons)
-
Engine Output - SAE J1995 - 2 × Cat C27 ACERT1530 HP
Operator's Cab
-
Internal Dimensions of Cab - Height7.05 ft
-
Internal Dimensions of Cab - Length7.22 ft
-
Internal Dimensions of Cab - Width5.25 ft
-
Operator's Eye Level - Approximately21.33 ft
-
Components (1)FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
-
Components (2)Fold-away auxiliary seat with safety belt
Swing System
-
Maximum Swing Speed - Diesel Version4.6 r/min
-
Parking BrakesWet multiple-disc brake, spring-loaded/hydraulically released
-
Swing Drive2 compact planetary transmissions with axial piston motors
-
Swing RingTriple-race roller bearing with sealed internal gearing
Weights
-
Frontless Weight473970 lb
Long Reach
Long Reach excavators provide extra reach needed for deep digging applications, finishing/grading of embankments, and for dredging under water.
VA Booms
Variable Adjustable (VA) boom configured machines offer improved right-side visibility, better roading balance, improved versatility when working in tight quarters, and are able to lift heavy loads. VA-style booms offer improved flexibility and versatility versus a standard one-piece boom.
Extending Booms & Sticks
Extending booms provide extra-long reach in unique applications, such as working alongside of a pier or access to a subway shaft. Oftentimes the work tools used in such applications develop a square hole. Typical work tool for this application is a clamshell-style bucket.
Material Handlers
Whether you operate indoors in areas with limited space such as a transfer or recycling station, or outdoors in a scrap yard or waterway/port application, material handlers are purpose-designed and built for excellent reach, flexibility and lift performance to meet the tough requirements of material handling applications. Special features such as heavy-duty frames and wide undercarriage ensure aggressive performance, reliability and excellent productivity. A variety of Cat grapples are also available to maximize machine performance in material handling applications.
Ultra High Demolition
UHD machines can reach higher and are capable of supporting the work tools you need for your demo job. Fronts can be interchangeable, making your demo jobs safer and faster. Caterpillar offers best-in-class work tools for bigger and more versatile demolition applications.
Rippers
Rippers are typically large hydraulic excavators equipped with short, heavy-duty booms and sticks. The stick is typically equipped with a ripper shank work tool. These machines are often used for ripping rock or tightly packed soil and can be found, for example, in road-building applications.
Standard Equipment:
- FOR MORE INFORMATION ON 6030 OEM FRONTLESS HYDRAULIC SHOVEL OPTIONS, PLEASE CONTACT CATERPILLAR OEM SOLUTIONS AT OEMSOLUTIONS@CAT.COM.