7495 HF Electric Rope Shovel
Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that’s better.
360 View not available for this product.
SPECIFICATION SUMMARY
- Note Dependent on application and material density
- Length of boom 67.0 ft
- Overall length of dipper handle 47.0 ft
- Note These weights will vary slightly depending upon dipper and optional equipment selection
PRICE (USD)
Call 800-637-5000 for rate information
Dimensions
-
NoteDependent on application and material density
-
Length of boom67.0 ft
-
Overall length of dipper handle47.0 ft
-
Dipper Payload120 t
-
Dipper Capacity30.6-62.7 m3 (40-82 yd3)
-
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)120 t
-
NoteDependent on application and material density
Weights
-
NoteThese weights will vary slightly depending upon dipper and optional equipment selection
-
Net weight, domestic, without ballast or dipper2305820.0 lb
-
NoteAll specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads
-
Working Weight - With Dipper and Standard Links3155000 lb
-
Ballast - Furnished By Customer667150 lb
-
Note (1)These weights will vary slightly depending upon dipper and optional equipment selection
-
Note (2)All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.
Electrical
-
Power Requirements – 50 Hz6,000V, 6,600V, 7,200V, 11,000V
-
Power Requirements – 60 Hz7,200V, 13,800V
-
Main Electrical Systems - Trail cable (furnished by customer)SHD-3-#1/0 at 8000V
-
Power Requirements – Average power demand934-1308 kW
-
NoteOther voltage options available to suit customer requirements
-
Trail cable (supplied by customer)SHD-3-#1/0 at 8000V
-
Transformer, auxiliary350 kVA, 7200V primary
-
Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
-
Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
-
Power Requirements - 60 Hz7,200V, 13,800V
-
Power Requirements - Average Power Demand934-1308 kW
-
NoteOther voltage options available to suit customer requirements
-
Power Requirements - Peak power3737 kW
-
System Voltage - Nominal50/60 Hz, 7,200V
-
DriveIGBT Acutrol drive system
Front End
-
Boom - Boom point sheave diameters96.0 in
-
Boom - Boom point sheavestwin-grooved, flame-hardened
-
Boom - Handle diameter34.0 in
-
Boom - Wall thickness (nominal)3.0 in
-
ComponentsOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Rope Data: Hoist – No.2
-
CrowdRope Crowd with crowd machinery located at the front center of the revolving frame.
-
Rope Data - Boom susp. - Constructionstruct. strand
-
Rope Data - Boom susp. - Diameter3.25 in
-
Rope Data - Boom susp. - No.4
-
Rope Data - Boom susp. - Typeequalized
-
Rope Data: Crowd – No.1
-
Rope Data: Retract – No.1
-
Rope Data: Boom suspension – No.4
-
Rope Data: Dipper trip – No.1
-
Rope Data: Hoist – Diameter2.75 in
-
Rope Data: Crowd – Diameter2.5 in
-
Rope Data: Retract – Diameter2.5 in
-
Rope Data: Boom suspension – Diameter3.25 in
-
Rope Data: Dipper trip – Diameter0.75 in
-
Rope Data: NoteHigh impact ropes available as an option
-
Rope Data - Retract - Construction8 × 37
-
Rope Data - Retract - Diameter2.5 in
-
Rope Data - Retract - No.1
-
Rope Data - Retract - Typesingle dual
-
ComponentsOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Crowd (1)Rope Crowd with crowd machinery located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
-
Crowd (2)(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
-
Rope Data - Boom Suspension - Diameter3.25 in
-
Rope Data - Boom Suspension - No.4
-
Rope Data - Crowd - Diameter2.5 in
-
Rope Data - Crowd - No.1
-
Rope Data - Dipper Trip - Diameter0.75 in
-
Rope Data - Dipper Trip - No.1
-
Rope Data - Hoist - Diameter2.75 in
-
Rope Data - Hoist - No.2
-
Rope Data - NoteHigh impact ropes available as an option
-
Rope Data - Retract - Diameter2.5 in
-
Rope Data - Retract - No.1
Main Structures
-
Crawler Dimensions – Overall width 317.5 cm (125 in) treads41.67 ft
-
Ground Bearing Pressure – Total effective bearing area 317.5 cm (125 in) treads57 m2 (247 kPa); 614 ft2 (36 psi)
-
Planetary PropelDual-motor independent drive
-
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-
Crawler Mounting - Total effective bearing area (317.5 cm treads)57.13 m2 (245 kPa); 615 ft2 (35.6 psi)
-
Crawler Mounting - Total effective bearing area (355.6 cm treads)64 m2 (219 kPa); 689 ft2 (31.8 psi)
-
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-
Planetary PropelDual-motor independent drive
-
Revolving Frame (Center Section) - Welded, impact-resistant steel: Length27.49 ft
-
Revolving Frame (Center Section) - Welded, impact-resistant steel: Width12.07 ft
-
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are mounted on either side of the revolving frame.
-
Swing (cont'd)Dual-output pinion shafts from each gearbox engage the swing rack.
-
Turntable - Forged rim, alloy steel swing rack pitch diameter17.26 ft
-
Turntable - Number of tapered rollers50
-
Turntable - Tapered rollers diameter10.75 in
-
Turntable - Tapered, forged alloy steel roller rails diameter14.83 ft
-
Turntable - Teeth external cut (face)9.5 in
-
Upper Works Overall Width - Including Standard Walkways41.99 in
-
Ground Bearing Pressure - NoteGround bearing pressure is dependent upon many factors
-
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-
Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads41.67 in
-
Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads57 m2 (247 kPa); 614 ft2 (36 psi)
-
Planetary PropelDual-motor independent drive
-
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Dimensions/Working Ranges
-
Maximum dumping radius71.0 ft
Dimensions - Optimal Working Ranges
-
Maximum clearance radius (revolving frame)30.64 ft
-
Maximum cutting height58.4 ft
-
Maximum cutting radius82.68 ft
-
Maximum dumping radius71.0 ft
-
Operator’s eye level34.81 ft
-
Overall width46.0 ft
-
Radius of level floor57.32 ft
Lube System
-
Components (1)Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
-
TypeAutomatic, single-line system for open gear lubricant and grease
-
ComponentsExternal fast fill from lower level
-
Components (2)External fast fill from lower level
Dimensions - Working Ranges
-
Dipper Capacities30.6-62.7 m3 (40-82 yd3)
-
Dipper Payload120 ton (US)
-
Maximum Dumping Height29.53 ft
-
Operating Weight3155000 lb
Dimensions (Approximate) - Optimal Working Ranges*
-
Dumping Height - With Clearance to Open Dipper Door29.53 ft
-
Cutting Height - Maximum55 ft
-
Cutting Radius - Maximum79.72 ft
-
Radius of Level Floor55.77 ft
-
Revolving Frame Tail Swing Radius30.51 ft
-
Note (1)Optimal working ranges based on loading a Cat 797F truck.
-
Note (2)*All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.