Your Rental Location
  • Request A Quote

D6K2 Track-Type Tractor

The D6K2 dozer is smarter and more efficient than ever. It comes equipped with GRADE technologies like Slope Assist and GRADE with 3D to make it easier for even less experienced operators to get more quality work done in less time. But intelligence is only part of the package – Eco Modes and a new power train deliver up to 17 percent more fuel efficiency, while providing superior maneuverability, faster steering response and greater capability to utilize full blade loads. This dozer also retains its optimal balance and undercarriage design for outstanding performance in finish grading applications.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Engine Model Cat® C4.4 ACERT™ with twin turbo
  • Flywheel Power 130 hp
  • Operating Weight 29258 lb
  • Note *VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Engine Model
    Cat® C4.4 ACERT™ with twin turbo
  • Flywheel Power
    130 hp
  • Bore
    4.13 in
  • Stroke
    4.99 in
  • Displacement
    268.5 in3
  • Emissions
    U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
  • Engine Power (Maximum) – SAE J1995
    160 hp
  • Engine Power (Maximum) – ISO 14396
    157 hp
  • Engine Power (Maximum) – ISO 14396 (DIN)
    159 hp
  • Net Power (Rated) – SAE J1349
    128 hp
  • Net Power (Rated) – ISO 9249
    130 hp
  • Net Power (Rated) - ISO 9249 (DIN)
    132 HP
  • Note
    All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
  • Note
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Note
    Engine ratings at 2,200 rpm
  • Note
    Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, alternator, A/C compressor at full load and cooling fan at maximum speed.
  • Note
    No engine derating required up to 3000 m (9,840 ft) altitude; beyond 3000 m (9,840 ft) automatic derating occurs.
  • Engine Model
    Cat C4.4
  • Flywheel Power
    130 HP
  • Bore
    4.13 in
  • Stroke
    4.99 in
  • Displacement
    268.5 in³
  • Emissions
    U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4
  • Engine Power - Maximum - ISO 14396
    157 HP
  • Engine Power - Maximum - ISO 14396 (DIN)
    159 HP
  • Engine Power - Maximum - SAE J1995
    160 HP
  • Net Power (Rated) - ISO 9249
    130 HP
  • Net Power (Rated) - SAE J1349
    128 HP
  • Note (1)
    All non road Tier 4 Interim and Final, Stage IIIB and IV, Japan 2014 (Tier 4 Final) and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up t
  • Note (2)
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Note (3)
    Engine ratings at 2,200 rpm
  • Note (4)
    Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, alternator, A/C compressor at full load and cooling fan at maximum speed.
  • Note (5)
    No engine derating required up to 3000 m (9,840 ft) altitude; beyond 3000 m (9,840 ft) automatic derating occurs.
  • Power - Net
    130 HP

Weights

  • Operating Weight
    29258 lb
  • Note
    Operating weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, Cat Comfort Series air suspension seat and operator.
  • Operating Weight – XL
    29258 lb
  • Operating Weight – LGP
    30664 lb
  • Shipping Weight – LGP
    30058 lb
  • Shipping Weight - XL
    28651 lb
  • Note
    Shipping weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 10% fuel, Cat Comfort Series air suspension seat.
  • Operating Weight
    29258 lb
  • Note (1)
    Operating weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, Cat Comfort Series air suspension seat and operator.
  • Operating Weight - LGP
    30664 lb
  • Operating Weight - XL
    29258 lb
  • Shipping Weight - LGP
    30058 lb
  • Note (2)
    Shipping weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 10% fuel, Cat Comfort Series air suspension seat.

Blades

  • Note
    *VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.
  • Blade Capacity – XL, VPAT
    4.26 yd3
  • Blade Width Over End Bits – XL, VPAT
    10.5 ft
  • Blade Type
    VPAT, VPAT Foldable*
  • Blade Capacity – LGP, VPAT
    4.98 yd3
  • Blade Width - Over End Bits - LGP, VPAT
    12 ft
  • Blade Type
    VPAT, VPAT Foldable*
  • Blade Capacity - LGP, VPAT
    4.98 yd³
  • Blade Capacity - XL, VPAT
    4.26 yd³
  • Blade Width - Over End Bits - XL, VPAT
    10.5 ft
  • Note
    *VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.

Undercarriage

  • Shoes/Side – XL/LGP
    40
  • Track Gauge – XL
    70 in
  • Track Gauge – LGP
    79 in
  • Track on Ground – XL/LGP
    104 in
  • Ground Contact Area (ISO 16754) – XL
    5070 in2
  • Ground Contact Area (ISO 16754) – LGP
    6912 in2
  • Track Rollers/Side – XL/LGP
    8
  • Ground Pressure (ISO 16754) – XL
    5.77 psi
  • Ground Pressure (ISO 16754) – LGP
    4.44 psi
  • Grouser Height – MS Shoe
    1.9 in
  • Grouser Height – ES Shoe
    2.2 in
  • Width - Shoe - XL
    22 in
  • Width - Shoe - LGP
    30 in
  • Ground Contact Area (ISO 16754) - LGP
    6912 in²
  • Ground Contact Area (ISO 16754) - XL
    5070 in²
  • Ground Pressure (ISO 16754) - LGP
    4.5 psi
  • Ground Pressure (ISO 16754) - XL
    5.9 psi
  • Grouser Height - ES Shoe
    2.2 in
  • Grouser Height - MS Shoe
    1.9 in
  • Shoes/Side - XL/LGP
    40
  • Track Gauge - LGP
    79 in
  • Track Gauge - XL
    70 in
  • Track Rollers/Side - XL/LGP
    8
  • Track on Ground - XL/LGP
    104 in

Service Refill Capacities

  • Fuel Tank
    69 gal
  • Cooling System
    7.9 gal
  • Hydraulic Tank
    16.9 gal
  • Final Drive - Each - XL/LGP
    4.9 gal (US)
  • DEF Tank
    5 gal
  • Engine Crankcase
    2.9 gal
  • Fuel Tank
    69 gal (US)
  • Cooling System
    7.9 gal (US)
  • Hydraulic Tank
    16.9 gal (US)
  • Engine Crankcase
    2.9 gal (US)
  • DEF Tank
    5 gal (US)

Ripper

  • Pocket Spacing
    35.3 in
  • Shank Gauge
    70.6 in
  • Shank Section
    58.5 × 138 mm (2.3 × 5.4 in)
  • Weight with One Shank
    1863 lb
  • Overall Beam Width
    76.8 in
  • Maximum Penetration – XL and LGP
    14.2 in
  • Each Additional Shank
    75 lb
  • Maximum Penetration Force - LGP
    10138 lb
  • Maximum Penetration Force - XL
    9480 lb
  • Maximum Pry-out Force - LGP
    37480 lb
  • Maximum Pry-out Force - XL
    37480 lb
  • Type Fixed
    Parallelogram
  • Number of Pockets
    3
  • Beam Cross Section
    165 × 211 mm (6.5 × 8.3 in)
  • Maximum Penetration - XL and LGP
    14.2 in
  • Pocket Spacing
    35.3 in
  • Shank Gauge
    70.6 in
  • Shank Section
    58.5 × 138 mm (2.3 × 5.4 in)
  • Weight - With One Shank
    1863 lb
  • Overall Beam Width
    76.8 in

Winch

  • Maximum Bare Drum – Line Pull
    50000 lbf
  • Maximum Bare Drum – Line Speed
    124 ft/min
  • Maximum Full Drum – Line Pull
    26000 lbf
  • Maximum Full Drum – Line Speed
    230 ft/min
  • Winch Drive
    Hydrostatic
  • Cable Ferrule Size (length)
    2.63 in
  • Winch Case Width
    29.1 in
  • Drum Diameter
    8 in
  • Drum Width
    11 in
  • Drum Capacity (recommended rope)
    306 ft
  • Drum Capacity - Optional Rope
    220 ft
  • Optional Cable Size
    0.87 in
  • Cable Ferrule Size - Outside Diameter
    2.13 in
  • Rope Recommended Diameter
    0.75 in
  • Winch Model
    PA50
  • Weight*
    2000 lb
  • Note
    *Weight includes: pump, operator controls, oil, mounting brackets and spacers.
  • Winch and Bracket Length
    33.2 in
  • Flange Diameter
    18 in
  • Cable Ferrule Size - Length
    2.63 in
  • Drum Capacity - Recommended Rope
    306 ft
  • Maximum Bare Drum - Line Pull
    50000 lbf
  • Maximum Bare Drum - Line Speed
    124 ft/min
  • Maximum Full Drum - Line Pull
    26000 lbf
  • Maximum Full Drum - Line Speed
    230 ft/min
  • Winch Case - Width
    29.1 in
  • Winch Drive
    Hydrostatic
  • Drum Diameter
    8 in
  • Drum Width
    11 in
  • Note
    *Weight includes: pump, operator controls, oil, mounting brackets and spacers.

Standards

  • FOPS
    FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
  • ROPS
    ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
  • Brakes
    Brakes meet the standard ISO 10265:2008.
  • FOPS
    FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
  • ROPS
    ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
  • Brakes
    Brakes meet the standard ISO 10265:2008.

Transmission - Travel Speed

  • Transmission Type
    Hydrostatic
  • Forward
    0-10 km/h (0-6.2 mph)
  • Reverse
    0-10 km/h (0-6.2 mph)

Sustainability

  • Engine Emissions
    Fully complies with Tier 4 Final/Stage IV/Korea Tier 4 emission standards
  • Vibration Levels (1)
    The hand/arm vibration of this machine is below 2.5 m/s2, for an experienced operator in a dozing application.
  • Vibration Levels (2)
    The whole body vibration information is available in Operation and Maintenance Manual SEBU8257.
  • Vibration Levels (3)
    The whole body vibration information is available in Pocket Guide HEGQ3339 “Driving Down Vibration.”
  • Vibration Levels (4)
    Operator's seat meets input “spectral class EM6” according to ISO 7096:2000. Seat has a transmissibility factor of “SEAT<0.7.”
  • Engine Emissions
    Fully complies with Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 emission standards

Air Conditioning System

  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tonnes.
  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tonnes.

PERFORMANCE AND PRODUCTIVITY

  • Cat C4.4 engine with twin turbochargers is combined with a hydrostatic transmission for outstanding fuel efficiency and the most power-dense drive train in its size class.
  • Superior maneuverability, faster steering response, greater capability to utilize full blade loads.
  • Eco Modes optimize engine speed, while maintaining ground speed, saving up to 17 percent fuel compared to the previous model in lighter blade load applications like finish grading.
  • Optimized undercarriage – eight (8) bottom rollers and two (2) carrier rollers for smoother ride and excellent finish grading performance.
  • Wide blade helps get more work done in fewer passes.
  • Variable Pitch Angle Tilt (VPAT) blade for more versatility, simpler adjustment.

TECHNOLOGY THAT GETS WORK DONE

  • Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes, and with less operator effort, saving you time and helping to increase your profit.
  • Cat GRADE with Slope Assist™ automatically maintains pre-established blade position without a GPS signal.
  • Updated Cat GRADE with 3D offers greater speed, accuracy and flexibility. Factory-integrated system eliminates position sensing cylinders. Antennas integrated into the cab roof for better protection.
  • More intuitive 10-inch (254 mm) touchscreen grade control display is easier to use.
  • AutoCarry™ automates blade lift to maximize blade load, improve load consistency, reduce track slip.
  • Cat Stable Blade works with electro-hydraulic controls to complement the operator’s blade-control input to get better finish grades faster and with less effort.
  • Standard Slope Indicate displays machine cross-slope and fore/aft orientation right on the main display.
  • Factory Attachment Ready Option (ARO) simplifies installation of all brands of grade control system.
  • Product Link™ collects machine data that can be viewed online through web and mobile applications.
  • Access information anytime, anywhere with VisionLink® – and use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve security on your job site.

ACHIEVE THE BEST GRADES

  • Designed from the ground up to give you a smooth ride so you can make the most of top grading speeds.
  • Eight bottom rollers and two carrier rollers optimize the undercarriage to give you smoother finish grades.
  • Rugged Variable Pitch Angle Tilt (VPAT) blade allows you to hydraulically adjust lift, angle and tilt for precise results.
  • Technologies like Slope Assist and Stable Blade are integrated right into the dozer to help even less experienced operators achieve a quality grade more quickly, and with fewer inputs.

EASY TO OPERATE

  • Fast response with intuitive, precise electro-hydraulic controls. Adjust sensitivity to fine, medium or coarse.
  • Liquid Crystal Display (LCD) is easy to read – includes your Slope Assist and rear camera displays (if equipped).
  • Power Pitch option lets you easily adjust blade to optimum pitch for your application using buttons on the right hand control.
  • Automatic Traction Control reduces track slip in poor underfoot conditions.
  • Rear vision camera provides enhanced visibility.
  • Easy to transport without blade removal.

BECAUSE UPTIME COUNTS

  • Grouped maintenance and diagnostic points, as well as ground level service and Diesel Exhaust Fluid fill access.
  • Track roller frame designed for easy cleanout.
  • Optional bracket mounts to rear of machine to keep a shovel handy.
  • Diesel Particulate Filter designed for the life of the engine – no need to clean out.

Standard Equipment:

  • Power Train
    • Cat C4.4 diesel engine turbocharged
    • Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Certified Engine with Aftertreatment
    • Aftercooler, Air to Air (ATAAC)
    • Glowplug starting aid
    • 3000 meter altitude operation capability without derating
    • Hydraulically driven, variable speed fan
    • Aluminum bar plate cooling system (radiator, power train, aftercooler)
    • Air cleaner with integrated precleaner, dust ejector and under hood air intake
    • Dual path, electronic control, closed-loop hydrostatic transmission
    • Electric fuel priming pump
    • Fuel/water separator
    • Automatic Traction Control
    • Programmable/selectable bi‑directional speed control
    • Engine Idle Shutdown
    • Auto Engine Speed Control
  • Technology Products
    • Cat GRADE with Slope Assist
    • Cat Stable Blade
    • Cat Slope Indicate
    • Product Link ready cellular or satellite (Product Link licensing not available in all areas. Please consult your Cat dealer for details.)
  • Undercarriage
    • SystemOne or Heavy Duty undercarriage
    • Center tread, sprocketed idler with SystemOne, standard idler with HD
    • Lifetime lubricated track rollers (8) and idlers
    • Carrier rollers (2)
    • Hydraulic track adjusters
    • Guards, front/rear guiding
    • Replaceable sprocket rim segments
  • Hydraulics
    • Three valve hydraulics
    • Load sensing hydraulics
  • Electrical
    • Horn
    • Back-up alarm
    • 12V converter, 10A
    • Diagnostic connector
    • Batteries, heavy duty, maintenance free, 900 CCA
    • Integrated lights (4 front, 2 rear)
    • 100 Amp alternator (24 volt)
    • 24V electric starter
  • Operator Environment
    • ROPS/FOPS Cab
    • Integrated A/C with automatic temperature control
    • Seat, air suspended, cloth for cab
    • Seat belt, retractable 76 mm (3 in)
    • Foot pads, dash
    • Color graphic 178 mm (7 in)
    • Travel speed limiter, electronic
    • Engine RPM and gear display
    • Hour meter, electronic
    • Engine air cleaner service indicator, electronic
    • Water-in-fuel indicator, electronic
    • Throttle switch, rotary
    • Eco mode
    • Controls, seat mounted, fore/aft adjustment
    • Armrests, adjustable
    • Mirror, rearview, inside
    • Single pedal combining deceleration and braking functions
    • Independent forward/reverse speed settings
    • Power port, 12 volt
    • Coat hook
    • Storage compartment
    • Cup holder
    • Floor mat, rubber, heavy duty
    • Intermittent wiper
    • 12V radio ready (plug and play)
  • Fluids
    • Antifreeze coolant (–37° C/–34.6° F)
    • Extended life coolant
  • Other Standard Equipment
    • C-frame, variable pitch link, hydraulic cylinders and lines
    • Engine enclosures
    • Hinged radiator louvered grill
    • Swing-out radiator fan
    • Front pull device
    • Rigid drawbar
    • Vandalism protection
    • Ecology drains (engine, power train and implement oil, engine coolant)
    • Scheduled Oil Sampling (S∙O∙S) ports (engine, power train and implement oil)
    • Heavy duty crankcase guard
  • Instructions
    • Warning decals, ANSI, are included for machines in the U.S.A. only.

Optional Equipment:

  • Power Train
    • Fan, demand, reversing
  • Undercarriage
    • XL, SystemOne
    • XL, Heavy Duty
    • LGP, SystemOne
    • LGP, Heavy Duty
  • Tracks (40 Sections)
    • Track Pairs, XL, SystemOne: – Track, 510 mm (20 in), Moderate Service, XL – Track, 510 mm (20 in), Extreme Service, XL – Track, 560 mm (22 in), Moderate Service, XL – Track, 560 mm (22 in), Extreme Service, XL
    • Track Pairs, XL, Heavy Duty: – Track, 510 mm (20 in), Extreme Service, XL – Track, 560 mm (22 in), Extreme Service, XL
    • Track Pairs, LGP, SystemOne: – Track, 760 mm (30 in), Moderate Service, LGP – Track, 760 mm (30 in), Extreme Service, LGP
    • Track Pairs, LGP, Heavy Duty: – Track, 760 mm (30 in), Extreme Service, LGP – Track, 760 mm (30 in), Self-Cleaning, LGP
  • Track Guiding Guards
    • Guard, track guiding, center
    • Guard, track guiding, front/rear
    • Guard, track guiding, full length
  • Operator Environment
    • Cab, Comfort Package
    • Cab, Comfort Package, Heavy Duty
    • Suspension seat, heated and ventilated with heated joystick handles
    • Visibility kit, single rear vision camera
    • Radio, AM/FM/AUX/USB/Bluetooth
  • Hydraulics
    • Hydraulic oil, bio
  • Guards And Protection
    • Cab, protection package
    • Screen, rear
    • Protection package, standard
    • Protection package, front
    • Protection package, heavy duty
  • Blades
    • Blade, 3196 mm (126 in) ARO XL
    • Blade, 3196 mm (126 in) Foldable ARO XL
    • Blade, 3684 mm (145 in) ARO LGP
    • Blade, 3684 mm (145 in) Foldable ARO LGP
    • Mechanical blade pitch
    • Blade power pitch
  • Rear Attachments
    • Drawbar
    • Ripper, straight teeth
    • Ripper, curved teeth
    • Counterweight, rear
    • Counterweight, additional slabs
  • Rear Attachment Control
    • Ripper control
    • Winch control
    • Ripper and winch control
    • Ripper and Power Pitch control
    • Ripper, Winch and Power Pitch control
  • Technology Products
    • AccuGrade Ready
    • Cat GRADE with 3D
    • Product Link Cellular
    • Product Link Satellite
    • Product Link Cellular and Satellite
  • Fuel Systems
    • Fuel tank, fast fuel and refill ready
  • Weather Packages And Starters
    • Cold Weather Package, 120V
    • Cold Weather Package, 240V
    • Electrical insulated breather
    • Starter standard
    • Starter high speed, low temperature
  • Fluids
    • Antifreeze, –50° C (–58° F)
  • Electrical
    • Beacon, rotating
  • Field Installed Attachments
    • Winch and fairleads: – PA50 winch, variable speed – Fairlead, three rollers – Kit, conversion, 4th roller – Winch step
  • Maintenance And Related Attachments
    • Shovel holder
    • Fuel pump, refilling
    • Oil change system, high speed
was successfully added to the cart! Request Quote