Your Rental Location
  • Request A Quote

Cat® D8T WH Waste Handler

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Engine Model Cat C15 ACERT™
  • Flywheel Power 335 hp
  • Operating Weight 86710 lb
  • Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN) 317 hp

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Engine Model
    Cat C15 ACERT™
  • Flywheel Power
    335 hp
  • Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
    317 hp
  • Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349
    335 hp
  • Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349 DIN
    343 hp
  • Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349
    312 hp
  • Bore
    5.4 in
  • Stroke
    6.75 in
  • Displacement
    928 in3
  • Emissions
    Tier 4 Final/Stage IV/Korea Tier 4
  • Note
    All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
  • Note
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Note
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
  • Engine Model
    Cat C15 ACERT™
  • Flywheel Power
    335 HP
  • Bore
    5.4 in
  • Stroke
    6.75 in
  • Displacement
    928 in³
  • Net Power - 1,900 rpm - ISO 9249/SAE J1349
    312 HP
  • Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN)
    317 HP
  • Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm
    343 HP
  • Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm
    335 HP
  • Emissions
    Tier 4 Final/Stage IV/Korea Tier 4
  • Note (1)
    All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
  • Note (2)
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Note (3)
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Weights

  • Operating Weight
    86710 lb
  • Operating Weight
    86710 lb

Blades – Capacity (SAE J1265)

  • 8 SU Landfill
    25.6 yd3
  • 8 SU LGP Landfill
    28.9 yd3

Blades – Width (over end bits)

  • 8 SU Landfill
    12.9 ft
  • 8 U Landfill
    13.9 ft
  • 8 SU LGP Landfill
    14.9 ft

Dimensions – Standard

  • Height (to top of roof-mounted precleaner)
    145.2 in
  • Length Basic Tractor (with striker bars with two counterweights)*
    206.4 in
  • Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
    183.0 in
  • Height of Grouser
    3.1 in
  • Track Gauge
    82.0 in
  • Width of Tractor (over trunnions)
    120.4 in
  • Without Trunnions (standard shoe width)
    106.0 in
  • Machine Height (from grouser tip) – Exhaust Stack
    136.7 in
  • Machine Height (from grouser tip) – EROPS (to top of railing)
    140.4 in
  • Machine Height (from grouser tip) – Length of Track on Ground
    126.2 in
  • Machine Height (from grouser tip) – Ground Clearance
    24.1 in
  • Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Dimensions – Non-Suspended

  • Height (to top of roof-mounted precleaner)
    145.2 in
  • Length Basic Tractor (with striker bars with two counterweights)*
    206.4 in
  • Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
    183.0 in
  • Height of Grouser
    3.1 in
  • Track Gauge
    82.0 in
  • Width of Tractor (over trunnions)
    120.4 in
  • Without Trunnions (standard shoe width)
    106.0 in
  • Machine Height (from grouser tip) – Exhaust Stack
    136.3 in
  • Machine Height (from grouser tip) – EROPS (to top of railing)
    140.7 in
  • Machine Height (from grouser tip) – Length of Track on Ground
    128.3 in
  • Machine Height (from grouser tip) – Ground Clearance
    23.8 in
  • Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Dimensions – LGP

  • Height (to top of roof-mounted precleaner)
    145.2 in
  • Length Basic Tractor (with striker bars with two counterweights)*
    206.4 in
  • Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
    183.0 in
  • Height of Grouser
    3.1 in
  • Track Gauge
    92.0 in
  • Width of Tractor (over trunnions)
    130.4 in
  • Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Operating Weights

  • Standard Waste Handler
    86710 lb
  • LGP Waste Handler
    91600 lb

Shipping Weight

  • Standard Waste Handler
    73400 lb
  • LGP Waste Handler
    77900 lb

Blades - Capacity (SAE J1265)

  • 8 U Landfill
    27.7 yd³
  • 8 SU LGP Landfill
    28.9 yd³
  • 8 SU Landfill
    25.6 yd³

Dimensions - LGP

  • Without Trunnions - Standard Shoe Width
    130 in
  • Machine Height - Grouser Tip - Exhaust Stack
    129.7 in
  • Machine Height - Grouser Tip - EROPS (Top of Railing)
    140.4 in
  • Machine Height - Grouser Tip - Length of Track on Ground
    126.2 in
  • Machine Height - Grouser Tip - Ground Clearance
    24.1 in
  • Height - Grouser
    3.1 in
  • Height - Top of Roof-Mounted Precleaner
    145.2 in
  • Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
    183 in
  • Length - Basic Tractor - With Striker Bars with Two Counterweights*
    206.4 in
  • Track Gauge
    92 in
  • Width - Tractor - Over Trunnions
    130.4 in
  • Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Transmission

  • 1 Forward
    2.1 mph
  • 2 Forward
    3.8 mph
  • 3 Forward
    6.6 mph
  • 1 Reverse
    2.8 mph
  • 2 Reverse
    5 mph
  • 3 Reverse
    8.8 mph
  • 1 Forward
    2.1 mile/h
  • 1 Reverse
    2.8 mile/h
  • 2 Forward
    3.8 mile/h
  • 2 Reverse
    5 mile/h
  • 3 Forward
    6.6 mile/h
  • 3 Reverse
    8.8 mile/h

Dimensions - Non-Suspended

  • Height - Grouser
    3.1 in
  • Height - Top of Roof-Mounted Precleaner
    145.2 in
  • Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
    183 in
  • Length - Basic Tractor - With Striker Bars with Two Counterweights*
    206.4 in
  • Machine Height - Grouser Tip - EROPS (Top of Railing)
    140.7 in
  • Machine Height - Grouser Tip - Exhaust Stack
    136.3 in
  • Machine Height - Grouser Tip - Ground Clearance
    23.8 in
  • Machine Height - Grouser Tip - Length of Track on Ground
    128.3 in
  • Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
  • Track Gauge
    82 in
  • Width - Tractor - Over Trunnions
    120.4 in
  • Without Trunnions - Standard Shoe Width
    106 in

Dimensions - Standard

  • Height - Grouser
    3.1 in
  • Height - Top of Roof-Mounted Precleaner
    145.2 in
  • Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
    183 in
  • Length - Basic Tractor - With Striker Bars with Two Counterweights*
    206.4 in
  • Machine Height - Grouser Tip - EROPS (Top of Railing)
    140.4 in
  • Machine Height - Grouser Tip - Exhaust Stack
    136.7 in
  • Machine Height - Grouser Tip - Ground Clearance
    24.1 in
  • Machine Height - Grouser Tip - Length of Track on Ground
    126.2 in
  • Note
    *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
  • Track Gauge
    82 in
  • Width - Tractor - Over Trunnions
    120.4 in
  • Without Trunnions - Standard Shoe Width
    106 in

Blades - Width - Over End Bits

  • 8 SU LGP Landfill
    14.9 ft
  • 8 SU Landfill
    12.9 ft
  • 8 U Landfill
    13.9 ft

Durability

  • Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
  • Final drive guarding helps prevent wire wrap and helps keep dirt and debris away from the Duo-Cone™ seals.
  • Pivot shaft seal guards help prevent debris from entering and damaging seals.
  • Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
  • Rotating bushings on tilt cylinders helps wrapping material to roll off hoses.
  • Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
  • Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout with an air wand.
  • Laminated thermal shields and insulated Clean Emissions Module.
  • Hinged belly guard for easy cleaning.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
  • Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.

Ease of Operation

  • Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
  • Enhanced AutoShift allows your operator to select optimum ground speed for the job and helps save fuel by automatically choosing the more efficient gear based on load.
  • Low effort, responsive controls for precision and ease of operation.
  • Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
  • Rear vision camera available to enhance visibility behind the machine.
  • Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.

Technology

  • Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
  • Cat GRADE with 3D (Optional) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
  • Cat AccuGrade™ (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.
  • Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
  • Remote monitoring with Product Link™*/VisionLink® helps you manage your fleet more effectively and profitably.

*Product Link not available in all areas. Please consult your Cat dealer for details.

was successfully added to the cart! Request Quote