Your Rental Location
  • Request A Quote

Cat | D6T Track-Type Tractor | Caterpillar

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Engine Model Cat C9.3 ACERT™
  • Flywheel Power 215 hp
  • Operating Weight 47138 lb
  • Displacement 567 in3

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Engine Model
    Cat C9.3 ACERT™
  • Flywheel Power
    215 hp
  • Displacement
    567 in3
  • Emissions
    U.S. EPA Tier 4 Final
  • Note
    All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
  • Note
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm
    245 HP
  • Net Power - 2,200 rpm - ISO 9249/SAE J1349
    215 HP
  • Build Number
    19
  • Engine Model
    Cat C9.3 ACERT™
  • Flywheel Power
    215 HP
  • Displacement
    567 in³
  • Emissions
    U.S. EPA Tier 4 Final
  • Note (1)
    All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
  • Note (2)
    Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Weights

  • Operating Weight
    47138 lb
  • Operating Weight
    47138 lb

Service Refill Capacities

  • Fuel Tank
    97.2 gal
  • Cooling System
    12.2 gal
  • Engine Crankcase
    6.5 gal
  • Power Train
    39.1 gal
  • Final Drives (each)
    3.6 gal
  • Hydraulic Tank
    16.5 gal
  • DEF Tank
    4.5 gal
  • Roller Frames (each)
    6.6 gal
  • Pivot Shaft Compartment
    1.3 gal
  • Fuel Tank
    97.2 gal (US)
  • Cooling System
    12.2 gal (US)
  • Engine Crankcase
    6.5 gal (US)
  • Power Train
    39.1 gal (US)
  • Final Drive - Each
    3.6 gal (US)
  • Hydraulic Tank
    16.5 gal (US)
  • Roller Frames - Each
    6.6 gal (US)
  • Pivot Shaft Compartment
    1.3 gal (US)
  • DEF Tank
    4.5 gal (US)

Operating Weight

  • XL A
    47846 lb
  • XL SU
    47138 lb
  • XL VPAT
    53042 lb
  • XW A
    49797 lb
  • XW SU
    48909 lb
  • XW VPAT
    54045 lb
  • LGP S
    51385 lb
  • LGP A
    53829 lb
  • Note
    Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades – Capacity

  • XL SU-Blade
    7.26 yd3
  • XL A-Blade
    5.17 yd3
  • XL VPAT-Blade
    6.07 yd3
  • XW SU-Blade
    7.38 yd3
  • XW A-Blade
    5.69 yd3
  • XW VPAT-Blade
    6.57 yd3
  • LGP S-Blade
    4.96 yd3
  • LGP A-Blade
    6.46 yd3

Dimensions – XL

  • Width of Tractor Without Trunnions (standard track)
    8.00 ft
  • Machine Height to Product Link Antenna(1)
    10.67 ft
  • Length of Track on Ground
    9.25 ft
  • Length of Basic Tractor(2)
    13.83 ft
  • Ground Clearance
    15 in
  • Ground Pressure (ISO 16754)(3)
    8.66 psi
  • Note
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – XW

  • Width of Tractor Without Trunnions (standard track)
    9.17 ft
  • Machine Height to Product Link Antenna(1)
    10.67 ft
  • Length of Track on Ground
    9.25 ft
  • Length of Basic Tractor(2)
    13.83 ft
  • Ground Clearance
    15 in
  • Ground Pressure (ISO 16754)(3)
    6.64 psi
  • Note
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – LGP

  • Width of Tractor Without Trunnions (standard track)
    10.50 ft
  • Machine Height to Product Link Antenna(1)
    10.83 ft
  • Length of Track on Ground
    10.67 ft
  • Length of Basic Tractor(2)
    14.50 ft
  • Ground Clearance
    16 in
  • Ground Pressure (ISO 16754)(3)
    5.11 psi
  • Note
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – XL VPAT

  • Width of Tractor Without Trunnions (standard track)
    8.92 ft
  • Machine Height to Product Link Antenna(1)
    10.67 ft
  • Length of Track on Ground
    9.25 ft

Operating Weights

  • LGP VPAT
    54526 lb
  • LGP A
    53829 lb
  • LGP S
    51385 lb
  • XL A
    47846 lb
  • XL SU
    47138 lb
  • XL VPAT
    53042 lb
  • XW A
    49797 lb
  • XW SU
    48909 lb
  • XW VPAT
    54045 lb
  • Note
    Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

  • LGP VPAT - Blade
    6.57 yd³
  • LGP A-Blade
    6.46 yd³
  • LGP S-Blade
    4.96 yd³
  • XL A - Blade
    5.17 yd³
  • XL SU - Blade
    7.26 yd³
  • XL VPAT - Blade
    6.07 yd³
  • XW A - Blade
    5.69 yd³
  • XW SU - Blade
    7.38 yd³
  • XW VPAT - Blade
    6.57 yd³

Blades - Width

  • XL SU - Blade
    10.7 ft
  • XL A - Blade
    13.7 ft
  • XL VPAT - Blade
    12.7 ft
  • XW SU - Blade
    11.7 ft
  • XW A - Blade
    14.8 ft
  • XW VPAT - Blade
    13.7 ft
  • LGP S-Blade
    13.3 ft
  • LGP A-Blade
    16.6 ft
  • LGP VPAT - Blade
    13.7 ft

Dimensions - XL VPAT

  • Length - Basic Tractor(2)
    16.08 ft
  • Ground Clearance
    15 in
  • Ground Pressure (ISO 16754)(3)
    9.78 psi
  • Note (1)
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2)
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3)
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Length - Track on Ground
    9.25 ft
  • Machine Height - To Product Link Antenna(1)
    10.67 ft
  • Width - Tractor - Without Trunnions - Standard Track
    8.92 ft

Dimensions - XW VPAT

  • Width - Tractor - Without Trunnions - Standard Track
    9.83 ft
  • Machine Height - To Product Link Antenna(1)
    10.83 ft
  • Length - Track on Ground
    10.67 ft
  • Length - Basic Tractor(2)
    16.42 ft
  • Ground Clearance
    16 in
  • Ground Pressure (ISO 16754)(3)
    6.92 psi
  • Note (1)
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2)
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3)
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP VPAT

  • Width - Tractor - Without Trunnions - Standard Track
    10.33 ft
  • Machine Height - To Product Link Antenna(1)
    10.83 ft
  • Length - Track on Ground
    10.67 ft
  • Length - Basic Tractor(2)
    16.42 ft
  • Ground Clearance
    16 in
  • Ground Pressure (ISO 16754)(3)
    6.28 psi
  • Note (1)
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2)
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3)
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP

  • Ground Clearance
    16 in
  • Ground Pressure (ISO 16754)(3)
    5.11 psi
  • Length - Basic Tractor(2)
    14.5 ft
  • Length - Track on Ground
    10.67 ft
  • Machine Height - To Product Link Antenna(1)
    10.83 ft
  • Note (3)
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track
    10.5 ft

  • Note (1)
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2)
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

Dimensions - XL

  • Ground Clearance
    15 in
  • Ground Pressure (ISO 16754)(3)
    8.66 psi
  • Length - Basic Tractor(2)
    13.83 ft
  • Length - Track on Ground
    9.25 ft
  • Machine Height - To Product Link Antenna(1)
    10.67 ft
  • Note (1)
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2)
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3)
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track
    8 ft

Dimensions - XW

  • Ground Clearance
    15 in
  • Ground Pressure (ISO 16754)(3)
    6.64 psi
  • Length - Basic Tractor(2)
    13.83 ft
  • Length - Track on Ground
    9.25 ft
  • Machine Height - To Product Link Antenna(1)
    10.67 ft
  • Note (1)
    (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2)
    (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3)
    (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track
    9.17 ft

Performance

  • New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.
  • Added gear between first and second, and seamless lock-up clutch engagement, for exceptionally smooth shifting.
  • Maintains power to the ground through load changes for an aggressive feel in the dirt.
  • Up to 2.5 percent more productive – move more material per hour.*
  • Faster implement response*, especially with GRADE technologies.
  • Versatility – pushing power you want for heavy dozing and the fine control you need for finish grading – all in one easy-to-transport machine.

*Compared to previous model.

Efficiency

        

  • Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.
  •     

  • Up to 20 percent more fuel efficient* – as much as 30 percent better in lighter load finish grading applications.
  •     

  • Sustainable: fuel savings reduces CO2 production by an average of approximately 16.6 metric tons (17.7 tons) per year.

*Compared to previous model.

Cat Connect Technology

        

  • Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality and significantly less operator effort. No additional hardware required.
  •     

  • Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D (Optional). Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables. Includes AutoCarry™ to further boost productivity.
  •     

  • Versatile, scalable Cat AccuGrade™ (Optional) is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
  •     

  • Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO) (Optional).
  •     

  • Manage your fleet more effectively and profitably with Product Link™/VisionLink® remote monitoring.

Ease of Operation

        

  • Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.
  •     

  • New Liquid Crystal Display (LCD) places machine data, settings menus, grade control data and more conveniently in front of the operator.
  •     

  • Display enables coded start and operator profiles.
  •     

  • Improved blade feedback with updated implement joystick.
  •     

  • More ground clearance and better penetration with new high-lift, multi-shank ripper.

Standard Equipment:

  • Power Train
    • Coolant, extended life
    • Shift management - automatic directional and downshift controlled throttle, load compensated
    • Aftercooler, air to air (ATAAC)
    • Torque divider, lock-up
    • Transmission, electronically controlled powershift, four speed
    • Air filter with electronic service indicator
    • Turbocharger, wastegate
    • Fuel priming pump, electric
    • Final drives, single reduction planetary
    • Ecology drain
    • C9.3 ACERT diesel engine U.S. EPA Tier 4 Final certified engine with aftertreatment
    • Parking brake, electronic
    • Full Auto Shift
    • Starting aid, ether, automatic
    • Air cleaner, strata tube precleaner with dust ejection
    • Radiator, aluminum bar plate
    • Fuel water separator
    • Fan, hydraulic
  • Undercarriage
    • Track adjusters, hydraulic
    • Rollers, lifetime lubricated
    • Track, lifetime lubricated
    • Equalizer bar
    • Guards, end track guiding
    • Idlers, center tread
    • Track roller frames, tubular
    • Carrier rollers
    • Sprocket rim segments, replaceable
    • Clamp master link
  • Electrical
    • Alarm, backup
    • Alternator, brushless
    • Batteries, two maintenance free 12V (1400 cca)(24V system), heavy duty
    • Converter, two 10 amp 12V outlets
    • Connector, diagnostic
    • Starter, heavy duty, 24V
    • Horn, forward warning
    • Jacket water heater, 120V
    • Light, work, underhood
  • Operator Environment
    • Air conditioner, ROPS mounted
    • Armrest, adjustable
    • Cab, ROPS/FOPS, sound suppressed and pressurized
    • Cup holders
    • Decelerator and brake pedal
    • Electro-hydraulics implement and steering controls
    • 180 mm (7 in) full color LCD display: engine coolant, power train oil, and hydraulic oil temperature, fuel and DEF level and engine RPM/gear display, hours, time and slope indicate
    • Camera ready
    • Foot pads, dash
    • Heater
    • Hour meter, electronic
    • Mirror, rearview
    • Power train control module: throttle dial, electronic; manual shift mode switch; bi-directional shift dial
    • Radio, AM/FM
    • Seat, cloth, air-suspension
    • Seat belt, retractable 76 mm (3 in)
    • Wipers, two speed
    • Glove box
  • Technology
    • Cat GRADE with Slope Assist
    • Product Link
    • Stable blade
  • Other Standard Equipment
    • CD ROM parts book
    • Engine enclosures, perforated
    • Front pull device
    • Guards, hinged bottom
    • Ground level service center with remote electrical disconnect, secondary shutdown switch and hour meter
    • Hood, perforated
    • Hydraulics, independent steering, work tool and fan pumps
    • Hydrualics, load sensing, dozer lift and tilt
    • Mounting, lift cylinder
    • Oil cooler, hydraulic
    • Radiator doors, perforated, louvered, and hinged
    • SOS sampling ports
    • Vandalism protection for fluid compartments and battery box

Optional Equipment:

  • Power Train
    • Final drive, LGP
    • Final drive, LGP guarded
    • Engine, thermal shield
    • Oil change system, high speed
    • Final drive, XL VPAT
    • Final drive, XW, XW guarded
    • Final drive, XL, XL guarded
    • Precleaner, with screen
  • Undercarriage
    • Track Pairs (LGP Tractor, 45 Section) - Heavy Duty: 710 mm (28 in) Moderate Service; 760 mm (30 in) Extreme Service; 760 mm (30 in) Extreme Service, Trapezoidal; 915 mm (36 in) Moderate Service; 915 mm (36 in) Extreme Service, Trapezoidal; 1000 mm (39 in) Self-Clean
  • Hydraulics
    • Fa, autoreversing
  • Rear Attachment Hydraulics And Controls
    • Hydraulics, ripper
    • Controls, winch
    • No rear hydraulics
    • Ripper tooth, straight
    • Hydraulics, winch/ripper
    • Ripper tooth, curved
  • Starters, Batteries And Alternators
    • Alternator, 150 amp, ducted
    • Engine coolant, Arctic (-50 degrees Celcius/-58 degrees Fahrenheight)
  • Electrical
    • Light, warning, strobe
    • Lights: Lighting Group (6-Basic); Lighting Group (10); Lighting Group (8-Sweeps); Lighting Group (6-Basic with Screen); Lighting Group (10-Premium with Screen)
    • Light, warning, strobe with plate
  • Operator Environment
    • Cab, single pane, screen ready
    • Air conditioner, ROPS
    • Seat, air suspension
    • Seat, cloth, heated
    • Seat, heated and ventilated
    • Radio, AM/FM
    • Visibility Arrangement, single camera
  • Technology Products
    • Machine control
    • Control, basic
    • AccuGrade Ready Option (ARO)
    • Cat GRADE with 3D
    • Product Link, Cellular PLE641
    • Product Link, Satellite PLE631
  • Safety And Security
    • Alarm, backup
    • Alarm, backup, guarded
    • Grab handles: Basic; Heavy Duty; Heavy Duty, sweeps; VPAT; Heavy Duty, VPAT; Sweeps; Screen, rear; Screens, side; Screens, door; Rear vision camera
  • Fuel Systems
    • Fuel tank, fast fill
  • Guards
    • Bottom guards
    • Guard, bottom, sealed, heavy duty
    • Guard, chassis
    • Guard, chassis, VPAT
    • Guard, fuel tank
    • Guard, fuel tank, fast fill
    • Guard, lights
    • Seal group, high debris
  • Attachments
    • Rear attachments
    • No rear attachment
    • Ripper, mult-shank
    • Winch package, standard speed
    • PA56 winch pakcage, slow speed
    • Drawbar, rigid short
    • Drawbar, rigid long
    • Striker bar box, rear
    • Striker bar box, rear with hydraulics
  • Other Attachments
    • Striker bars, front
    • Striker bar, rear
    • Fairlead, three rollers
    • Fourth roller
    • Counterweights: Additional, Rear, Rear slab
    • Hitch, front
    • Towing device, pull-hook
  • Field Installed Attachments
    • PA56 winch standard and installation arrangement
    • PA56 winch slow and installation arrangement
    • Fairlead, three rollers
    • Fourth roller
  • Bulldozer Installation Packages
    • 6SU XL
    • 6SU XL, guarded
    • 6A XL
    • 6A XL HD
    • 6SU XW
    • 6SU XW, guarded
    • 6A XW
    • 6S LGP
    • 6S LGP, guarded
    • 6A LGP
    • VPAT XL
    • VPAT XL, GRADE with 3D
    • VPAT XW/LGP
    • VPAT XW/LGP, GRADE with 3D
    • Lift cylinders
    • Standard, XL/XW or LGP
    • GRADE, XL/XW or LGP
  • Blades
    • 6SU XL ARO
    • 6SU XL Landfill
    • 6A XL
    • 6SU XW ARO
    • 6SU XW, Landfill
    • 6A XW
    • 6S LGP ARO
    • 6S LGP, Landfill
    • 6A LGP
  • Special Arrangements
    • Waste Handling Arrangement
    • Forestry Arrangement
was successfully added to the cart! Request Quote