Your Rental Location
  • Request A Quote

910 Compact Wheel Loader

The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Rated Net Power - ISO 9249 (DIN) 99 HP
  • Engine Model Cat C3.6
  • Maximum Gross Power - SAE J1995 111 HP
  • Maximum Gross Power - ISO 14396 110 HP

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Rated Net Power - ISO 9249 (DIN)
    99 HP
  • Engine Model
    Cat C3.6
  • Maximum Gross Power - SAE J1995
    111 HP
  • Maximum Gross Power - ISO 14396
    110 HP
  • Maximum Gross Torque - SAE J1995
    335 ft·lbf
  • Rated Net Power - ISO 9249
    98 HP
  • Rated Net Power - Rated Engine Speed
    2200 r/min
  • Stroke
    4.72 in
  • Note
    Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
  • Maximum Gross Power - Maximum Engine Speed
    2350 r/min
  • Maximum Gross Torque - ISO 14396
    332 ft·lbf
  • Maximum Gross Power
    110 HP
  • Bore
    3.86 in
  • Rated Net Power - SAE J1349
    99 HP
  • Displacement
    220 in³
  • Maximum Gross Power - ISO 14396 (DIN)
    111 HP
  • Emissions
    Engine meets Tier 4 Final/Stage V emission standards.

Transmission

  • Forward and Reverse - Speed Range 1*
    6.3 mile/h
  • Note
    *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Weights

  • Operating Weight
    18102 lb

Buckets

  • Bucket Capacities
    1.3-1.9 m3 (1.7-2.5 yd3)
  • Bucket Capacities - General Purpose
    1.3-1.9 m³ (1.7-2.5 yd³)
  • Bucket Capacities - Light Material
    2.5-3.5 m³ (3.3-4.6 yd³)

Steering

  • Maximum Working Pressure - Steering Pump
    2683 psi
  • Steering Articulation Angle - Each Direction
    40 °
  • Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
    3.2 s
  • Maximum Flow - Steering Pump
    17 gal/min
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    3.75 turns

Loader Hydraulic System

  • Hydraulic Cycle Time - Dump, at Maximum Reach
    1.4 s
  • Hydraulic Cycle Time - Total Cycle Time
    12.5 s
  • Maximum Working Pressure - Implement Pump
    3408 psi
  • Relief Pressure - Tilt Cylinder
    4931 psi
  • Hydraulic Cycle Time - Rackback
    2.2 s
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
    3046 psi
  • Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
    5.2 s
  • Maximum Flow - Implement Pump
    32 gal/min
  • Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
    3046 psi
  • Maximum Flow - Implement Pump - 4th Function, Maximum Flow
    24 gal/min
  • Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
    24 gal/min
  • Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
    3.7 s

Service Refill Capacities

  • Cooling System
    5.7 gal (US)
  • Fuel Tank
    43.6 gal (US)
  • Hydraulic System - Including Tank
    25.9 gal (US)
  • Hydraulic Tank
    14.5 gal (US)
  • Transmission
    0.8 gal (US)
  • Note
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Axles - Front Center Differential
    2 gal (US)
  • Axles - Rear Center Differential
    2 gal (US)
  • Engine Crankcase
    2.6 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank
    4.8 gal (US)

Tires

  • Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
  • Standard Size
    15.5 R25 L2 XTLA
  • Other Choices Include
    17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
  • Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Note (1)
    Other tire choices are available. Contact your Cat dealer for details.

Cab

  • ROPS
    ISO 3471:2008
  • FOPS
    EN ISO 3449:2008 (ISO 3449:2005)
  • Note (2)
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
  • Note (3)
    The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
  • Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (4)
    *The measurements were conducted with the cab doors and windows closed.

Axles

  • Front
    Fixed; Locking differential (standard)
  • Rear
    Oscillating ±11 degrees; Locking differential (Standard)

Cat® C3.6 Engine

EU Stage V and U.S. EPA Tier 4 Final compliant.

Cat Optimized Z-bar Loader Linkage

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

The 910 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulics and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Cab

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket Mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Serviceability

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and efficient engine power delivers a balanced solution for all customer applications.

Standard Fuel Savings Features

Standard Fuel Savings Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 910 both powerful and fuel efficient.