Your Rental Location
  • Request A Quote

907M Compact Wheel Loader

The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

360 View not available for this product.

SPECIFICATION SUMMARY
  • Maximum Gross Power: ISO 14396 (DIN) 74 hp
  • Operating Weight 12677 lb
  • Rated Bucket Capacity 1.31 yd3
  • Net Power 74 hp

PRICE (USD)
Call 800-637-5000 for rate information

Engine

  • Maximum Gross Power: ISO 14396 (DIN)
    74 hp
  • Net Power
    74 hp
  • Engine Model
    Cat® C3.3B DIT*
  • Rated net power @ 2,400 rpm – SAE J1349
    73 hp
  • Rated net power @ 2,400 rpm – ISO 9249 (1977)/EEC 80/1269
    74 hp
  • Emissions
    *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
  • Maximum Gross Power - ISO 14396
    73 HP
  • Maximum Gross Power - SAE J1995
    74 HP
  • Maximum gross torque – ISO 14396
    192 lbf-ft
  • Maximum net torque – SAE J1349
    189 lbf-ft
  • Maximum net torque – ISO 9249 (1977)/EEC 80/1269
    191 lbf-ft
  • Displacement
    201 in3
  • Bore
    3.7 in
  • Stroke
    4.7 in
  • Note
    Net power ratings are tested at the reference conditions for the specified standard.
  • Note
    Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
  • Note
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note
    Flywheel per the SAE reference conditions with the fan at maximum speed.
  • Note
    The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
  • Maximum Gross Power
    73 hp
  • Net Power
    74 HP
  • Emissions
    *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards.
  • Engine Model
    Cat® C3.3B DIT*
  • Maximum Gross Power - ISO 14396 (DIN)
    74 HP
  • Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269
    74 HP
  • Rated Net Power - 2,400 rpm - SAE J1349
    73 HP
  • Maximum Gross Power
    73 HP
  • Bore
    3.7 in
  • Displacement
    201 in³
  • Maximum Gross Torque - ISO 14396
    192 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269
    191 ft·lbf
  • Note (1)
    Net power ratings are tested at the reference conditions for the specified standard.
  • Note (2)
    Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
  • Note (3)
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note (4)
    Flywheel per the SAE reference conditions with the fan at maximum speed.
  • Note (5)
    The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
  • Stroke
    4.7 in
  • Maximum Gross Power - DIN ISO 14396
    74 HP

Weights

  • Operating Weight
    12677 lb
  • Note
    Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. – 907M is configured w
  • Operating Weight
    12677 lb
  • Note
    Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured
  • Note
    Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. � 907M is configured

Operating Specifications

  • Rated Bucket Capacity
    1.31 yd3
  • Full Turn Tipping Load
    7716 lb
  • Tipping load – straight (ISO 14397-1)
    9007 lb
  • Tipping load – full turn (ISO 14397-1)
    7339 lb
  • Clearance: full lift and 45° dump
    7.97 ft
  • Reach: full lift and 45° dump
    2.60 ft
  • Steering articulation angle each direction
    39°
  • Rated Bucket Capacity
    1.31 yd³
  • Clearance - Full Lift and 45° Dump
    7.97 ft
  • Full Turn Tipping Load
    7716 lb
  • Reach - Full Lift and 45° Dump
    2.6 ft
  • Steering Articulation Angle - Each Direction
    39°
  • Tipping Load - Full Turn - ISO 14397-1
    7339 lb
  • Tipping Load - Straight - ISO 14397-1
    9007 lb

Loader Hydraulic System

  • Maximum flow – implement pump
    19 gal/min
  • Maximum flow – implement pump: Auxiliary function standard flow
    19 gal/min
  • Maximum flow – implement pump: Auxiliary function high flow
    31 gal/min
  • Relief pressure – tilt cylinder head
    4496 psi
  • 3rd function maximum working pressure
    3408 psi
  • Maximum Working Pressure - Implement Pump
    3408 psi
  • Relief Pressure - Tilt Cylinder Rod
    2756 psi
  • Boost flow maximum pressure
    3191 psi
  • Lift cylinder: double acting – Bore diameter
    3 in
  • Lift cylinder: double acting – Rod diameter
    2 in
  • Lift cylinder: double acting – Stroke
    27.4 in
  • Tilt cylinder: double acting – Bore diameter
    3.5 in
  • Tilt cylinder: double acting – Rod diameter
    2.2 in
  • Tilt cylinder: double acting – Stroke
    16.4 in
  • Hydraulic cycle times (1,800 rpm): Raise (ground level to maximum lift)
    5.5 seconds
  • Hydraulic cycle times (1,800 rpm): Dump (at maximum lift height)
    1.5 seconds
  • Hydraulic cycle times (1,800 rpm): Float down (maximum lift to ground level)
    2.6 seconds
  • Hydraulic cycle times (1,800 rpm): Total cycle time
    9.6 seconds
  • Hydraulic cycle times (1,000 rpm): Raise (ground level to maximum lift)
    9.6 seconds
  • Hydraulic cycle times (1,000 rpm): Dump (at maximum lift height)
    3 seconds
  • Hydraulic cycle times (1,000 rpm): Float down (maximum lift to ground level)
    2.6 seconds
  • 3rd Function Maximum Working Pressure
    3408 psi
  • Maximum Flow - Implement Pump
    19 gal/min
  • Maximum Flow - Implement Pump - Auxiliary Function High Flow
    31 gal/min
  • Maximum Flow - Implement Pump - Auxiliary Function Standard Flow
    19 gal/min
  • Relief Pressure - Tilt Cylinder Head
    4496 psi
  • Boost Flow Maximum Pressure
    3191 psi
  • Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height
    3 s
  • Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level
    2.6 s
  • Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift
    9.6 s
  • Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height
    1.5 s
  • Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level
    2.6 s
  • Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift
    5.5 s
  • Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time
    9.6 s
  • Lift Cylinder, Double Acting - Bore Diameter
    3 in
  • Lift Cylinder, Double Acting - Rod Diameter
    2 in
  • Lift Cylinder, Double Acting - Stroke
    27.4 in
  • Tilt Cylinder, Double Acting - Bore Diameter
    3.5 in
  • Tilt Cylinder, Double Acting - Rod Diameter
    2.2 in
  • Tilt Cylinder, Double Acting - Stroke
    16.4 in

Service Refill Capacities

  • Cooling system
    4.5 gal
  • Fuel tank
    20.6 gal
  • Hydraulic system (including tank)
    18.5 gal
  • Engine crankcase
    3 gal
  • Transmission (gear box)
    2.2 gal
  • Axles – Front
    N/A
  • Axles – Rear
    N/A
  • Hydraulic tank
    12.2 gal
  • Cooling System
    4.5 gal (US)
  • Engine Crankcase
    3 gal (US)
  • Fuel Tank
    20.6 gal (US)
  • Hydraulic System - Including Tank
    18.5 gal (US)
  • Axles - Front
    N/A
  • Axles - Rear
    N/A
  • Hydraulic Tank
    12.2 gal (US)
  • Transmission - Gear Box
    2.2 gal (US)

Dimensions with Bucket (Approximate): Standard Lift – with ISO Coupler

  • Height: ground to cab**
    8.42 ft
  • Height: ground clearance**
    11 in
  • Length: wheel base
    7.08 ft
  • Length: overall*
    17.92 ft
  • Reach: bucket at 45°*
    2.33 ft
  • Dig depth**
    3.7 in
  • Clearance: bucket at 45°*
    8.08 ft
  • Clearance: level bucket**
    9.92 ft
  • Height: bucket pin**
    10.58 ft
  • Width: bucket
    6.67 ft
  • Width: tread center
    4.58 ft
  • Turning radius: over bucket
    14.67 ft
  • Turning radius: inside of tires
    7.33 ft
  • Machine width
    6.00 ft
  • Dump angle at full lift
    45°
  • Departure angle
    33°
  • Articulation angle
    39°
  • Operating weight
    12913 lb
  • Note
    *Vary with bucket.
  • Note
    **Vary with tire.
  • Note
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Dimensions with Bucket (Approximate): Standard Lift – with SSL Coupler

  • Height: ground to cab**
    8.42 ft
  • Height: ground clearance**
    11 in
  • Length: wheel base
    7.08 ft
  • Length: overall*
    18.42 ft
  • Reach: bucket at 45°*
    2.67 ft
  • Dig depth**
    4.2 in
  • Clearance: bucket at 45°*
    7.67 ft
  • Clearance: level bucket**
    9.92 ft
  • Height: bucket pin**
    10.58 ft
  • Width: bucket
    6.67 ft
  • Width: tread center
    4.58 ft
  • Turning radius: over bucket
    14.67 ft
  • Turning radius: inside of tires
    7.33 ft
  • Machine width
    6.00 ft
  • Dump angle at full lift
    45°
  • Departure angle
    33°
  • Articulation angle
    39°
  • Operating weight
    12913 lb
  • Note
    *Vary with bucket.
  • Note
    **Vary with tire.
  • Note
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Buckets

  • Bucket Capacities
    0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
  • General purpose
    1.31 yd3
  • Light material
    1.57 yd3
  • Bucket Capacities
    0.75-1.5 m3 (1.0-2.0 yd3)
  • General Purpose
    1.31 yd³
  • Light Material
    1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
  • General Purpose
    0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
  • Note
    All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

Steering

  • Steering articulation angle each direction
    39°
  • Steering cylinder: double acting – Bore diameter
    3.1 in
  • Steering cylinder: double acting – Rod diameter
    1.4 in
  • Steering cylinder: double acting – Stroke
    11.8 in
  • Nominal flow – steering pump
    12 gal/min
  • Maximum working pressure – steering pump
    3191 psi
  • Maximum steering torque – 0° (straight machine)
    37155 lbf-ft
  • Maximum steering torque – 39° (full turn)
    27747 lbf-ft
  • Steering ac cycle times (full left to full right) – 2,620 rpm
    3 seconds
  • Number of steering wheel turns – Full left to full right or full right to full left
    <6 turns
  • Maximum Steering Torque - 0° (Straight Machine)
    37155 ft·lbf
  • Maximum Steering Torque - 39° (Full Turn)
    27747 ft·lbf
  • Maximum Working Pressure - Steering Pump
    3191 psi
  • Nominal Flow - Steering Pump
    12 gal/min
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    <6 turns
  • Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm
    3 s
  • Steering Articulation Angle - Each Direction
    39°
  • Steering Cylinder, Double Acting - Bore Diameter
    3.1 in
  • Steering Cylinder, Double Acting - Rod Diameter
    1.4 in
  • Steering Cylinder, Double Acting - Stroke
    11.8 in

Drive Train

  • Forward – Range 1
    6 mph
  • Forward – Range 2
    12 mph
  • Forward – High range
    22 mph
  • Reverse – Range 1
    6 mph
  • Reverse – Range 2
    12 mph
  • Reverse – High range
    22 mph
  • Forward - High Range
    22 mile/h
  • Forward - Range 1
    6 mile/h
  • Forward - Range 2
    12 mile/h
  • Reverse - High Range
    22 mile/h
  • Reverse - Range 1
    6 mile/h
  • Reverse - Range 2
    12 mile/h

Tires

  • Option
    335/80 R18 XZSL Michelin
  • Option
    340/80 R18 AT-R Firestone
  • Option
    340/80 R18 XMCL Michelin
  • Option
    340/80 R18 TRI2 Nokian
  • Option
    340/80 R18 Bibload Michelin
  • Option
    405/70 R18 SPT9 Dunlop*
  • Option
    12.5/80 R18 Flexport™
  • Note
    *Standard tire.
  • Note
    Other tire choices available, contact your Cat dealer for details.
  • Note
    In certain applications, the loader’s productive capabilities may exceed the tires’ tonnes-km/h (ton-mph) capabilities.
  • Note
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Note (1)
    *Standard tire.
  • Note (2)
    Other tire choices available, contact your Cat dealer for details.
  • Note (3)
    In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
  • Note (4)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Option (1)
    335/80 R18 XZSL Michelin
  • Option (2)
    340/80 R18 AT-R Firestone
  • Option (3)
    340/80 R18 XMCL Michelin
  • Option (4)
    340/80 R18 TRI2 Nokian
  • Option (5)
    340/80 R18 Bibload Michelin
  • Option (6)
    405/70 R18 SPT9 Dunlop*
  • Option (7)
    12.5/80 R18 Flexport™

Cab

  • ROPS
    SAE J1040 MAY94, ISO 3471-1994.
  • FOPS
    SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
  • Note
    Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note
    When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A
  • ROPS
    SAE J1040 MAY94, ISO 3471-1994.
  • FOPS
    SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
  • Note (1)
    Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (2)
    When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

  • Articulation Angle
    39°
  • Clearance - Bucket at 45° *
    8.08 ft
  • Clearance - Level Bucket**
    9.92 ft
  • Departure Angle
    33°
  • Dig Depth**
    3.7 in
  • Dump Angle at Full Lift
    45°
  • Height - Bucket Pin**
    10.58 ft
  • Height - Ground Clearance**
    11 in
  • Height - Ground to Cab**
    8.42 ft
  • Length - Overall*
    17.92 ft
  • Length - Wheel Base
    7.08 ft
  • Machine Width
    6 ft
  • Note (1)
    *Vary with bucket.
  • Note (2)
    **Vary with tire.
  • Note (3)
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
  • Operating Weight
    12913 lb
  • Reach - Bucket at 45°*
    2.33 ft
  • Turning Radius - Inside of Tires
    7.33 ft
  • Turning Radius - Over Bucket
    14.67 ft
  • Width - Bucket
    6.67 ft
  • Width - Tread Center
    4.58 ft

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

  • Articulation Angle
    39°
  • Clearance - Bucket at 45° *
    7.67 ft
  • Clearance - Level Bucket**
    9.92 ft
  • Departure Angle
    33°
  • Dig Depth**
    4.2 in
  • Dump Angle at Full Lift
    45°
  • Height - Bucket Pin**
    10.58 ft
  • Height - Ground Clearance**
    11 in
  • Height - Ground to Cab**
    8.42 ft
  • Length - Overall*
    18.42 ft
  • Length - Wheel Base
    7.08 ft
  • Machine Width
    6 ft
  • Note (1)
    *Vary with bucket.
  • Note (2)
    **Vary with tire.
  • Note (3)
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
  • Operating Weight
    12913 lb
  • Reach - Bucket at 45°*
    2.67 ft
  • Turning Radius - Inside of Tires
    7.33 ft
  • Turning Radius - Over Bucket
    14.67 ft
  • Width - Bucket
    6.67 ft
  • Width - Tread Center
    4.58 ft

Engine - Tier 4 Final/Stage IV

  • Maximum Net Torque - SAE J1349
    189 ft·lbf

High Performance

An electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for fast digging cycles and the flexibility to efficiently perform a multitude of tasks along with high, full turn tipping loads and breakout forces, the M Series delivers a solution for all customer applications.

Ease of Operation

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. The all-in-one joystick helps keep eyes on the work. Machine responsiveness can be adjusted with the push of a button, which allows you to set up the machine exactly the way you want it based on the application.

Comfortable Cab

  • Low effort, responsive joystick includes Forward/Neutral/Reverse switch, optional diff lock, continuous flow triggers with proportional, third function hydraulics.
  • Easy access to the cab with ergonomically placed grab rails, steps and large platform.
  • Superb visibility to the work tool due to the wide windshield and Optimized Z-bar Loader.
  • Low sound levels.
  • Optional air conditioning with defrost/demist.
  • Optional heated, air suspension seat with lumbar and seat back tilt adjustment.

Parallel Lift Loader Linkage

The Cat® optimized Z-bar Loader combines the digging efficiency of a traditional Z-bar with tool carrying capabilities for great performance and versatility.

  • Parallel lift and high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
  • Linkage features excellent visibility to the bucket cutting edge and fork tips.

Standard Equipment:

  • Transmission And Hydraulics
    • 18° frame oscillation, 78° articulation
    • Demand based cooling fan
    • Hydrostatic drive
    • Loader arm float function
    • Parallel lift Z-bar loader
    • Proportional auxiliary hydraulic circuit
    • Transmission, 20 km/h (12.4 mph) with heavy duty axles
    • Transmission inching function
  • Engine
    • Cat C3.3B DIT Tier 4 Final/Stage V (Europe only) or Tier 4 Final (North America only) emission standards
    • Cat extended life coolant
    • Closed circuit breather
    • Easy quick release fuel filter/water separator
    • ECO mode
    • Engine oil drain valve (non-spill ECO drain)
    • Lockable engine compartments
    • Two stage air cleaner with visual indicator
  • Electrical
    • Alternator 90 amp
    • Battery disconnect switch
    • Cab mounted fuse panel
    • Engine cold starter aid
    • Heavy duty battery, 12V
    • Service point connector for electronic diagnosis (Cat Electronic Technician)
    • Reversing alarm
  • General
    • E-coat paint primer
    • Pressure test points
    • Recovery hitch and pin
    • Scheduled Oil Sampling S·O·SSM ports
  • Operator Environment
    • Adjustable internal mirror
    • Adjustable wrist rest
    • Auxiliary power sockets
    • Coat hook
    • Cup holder
    • Digital service hour meter
    • Easy clean cab floor
    • Gauges: fuel hydraulic temperature, coolant temperature, speedometer
    • Multifunction joystick with direction control
    • On board digital display cluster
    • Operator station on isolation mounts
    • Retractable seat belt
    • ROPS and FOPS certified canopy/cab
    • Sound suppression
    • Sun visor
    • Suspended brake/accelerator pedals
    • Suspension seat
    • Two doors (enclosed cab)
    • Two external knock back mirrors
    • Warning indicators for major systems
    • Wiper/washer front and rear (enclosed cab)
    • Warnings: master, park brake, hydraulic oil pressure, engine oil pressure, coolant temp, electrical system, hydraulic filter bypass

Optional Equipment:

  • Transmission And Hydraulics
    • 100% differential lock on both axles, selectable on the move
    • Adjustable speed control (creeper control)
    • Adjustable high stat response settings
    • Electronic throttle lock
    • Ride control
    • Rimpull control
    • Speeder, 35 km/h (21.7 mph) with secondary steering
  • Engine
    • Engine block heater 120V
    • Precleaner for engine air filter
  • Electrical
    • Machine Security System (MSS)
    • Magnetic rotating beacon
    • Halogen working lights, two front and two rear
    • LED working lights, two front and two rear
    • Work tool wiring harness
  • General
    • Custom color
    • Rear light guards
    • Tire options including heavy duty tires
  • Fluids
    • Cat extended life coolant (–50° C/–58° F)
  • Loader
    • Adjustable implement modulation
    • High flow auxiliary hydraulics with pressure relieving quick disconnect manifold
    • Load check valves
    • Return To Dig tool positioner
  • Work Tools
    • For all work tool options, consult your local Cat dealer
  • Operator Environment
    • Air conditioning
    • Cabin light
    • Cat Radio/FM/DAB+/Bluetooth/Aux/Mic/Phone/USB
    • Comfort cab includes: cloth suspension seat, heated rear window, sliding left window and radio ready
    • Open canopy: fixed steering column, coat hook, sun visor (North America only)
    • Deluxe cab includes: Comfort cab options plus heated cloth air suspension seat with lumbar support and right sliding window
    • Heated rear window (enclosed cab)
    • Heater with window side and feet vents (enclosed cab)
    • Radio ready kit including speakers (enclosed cab)
    • Rear blind
was successfully added to the cart! Request Quote