Your Rental Location
  • Request A Quote

S385C Shear

S385C Shear

360 View not available for this product.

SPECIFICATION SUMMARY
  • Throat Force 1405.0 Sh Ton
  • Apex Force 528.0 Sh Ton
  • Tip Force 279.0 Sh Ton
  • Shear Arm Torque 2050000.0 lb ft

PRICE (USD)
Call 800-637-5000 for rate information

Shear Forces

  • Throat Force
    1405.0 Sh Ton
  • Apex Force
    528.0 Sh Ton
  • Tip Force
    279.0 Sh Ton
  • Shear Arm Torque
    2050000.0 lb ft
  • Cycle Time, open
    5.0 Seconds
  • Cycle time, close
    5.0 Seconds

Dimensions

  • Weight, boom-mount
    17580.0 lb
  • Weight, stick-mount
    18345.0 lb
  • Jaw Opening
    34.0 in
  • Jaw Depth
    35.0 in
  • Jaw Width, moving
    6.0 in
  • Jaw Width, fixed
    18.0 in
  • Length
    168.0 in
  • Height
    84.0 in
  • Width
    55.0 in

Hydraulic Requirements

  • Cutting Circuit - Max. Relief Pressure
    5076.0 psi
  • Cutting Circuit - Max. Flow
    182.0 gal/min
  • Rotation Circuit - Max. Relief Pressure
    2030.0 psi
  • Rotation Circuit - Max. Flow
    21.0 gal/min

  • Length
    168 in
  • Jaw Depth
    35 in
  • Cycle Time - Close
    5 Seconds
  • Width
    55 in
  • Jaw Width - Moving
    6 in
  • Height
    84 in
  • Jaw Width - Fixed
    18 in

Bolt-On Piercing Tip

Piercing tip is bolt-on for rapid maintenance and low operating cost. Tip is fully reversible, giving two uses per set.

Jaw Design

Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.

360-degree Rotation

Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.

Reversible Knives

The four main, side and front knives are fully reversible with four effective cutting edges.

Easy Maintenance

Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.

Protected Cylinder

Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.

Completely Cat

Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.

was successfully added to the cart! Request Quote