PC408B High Flow XHP Cold Planer

Cat® Cold Planers are designed for small paving jobs in residential and commercial applications and are primarily used to economically restore asphalt and concrete surfaces. They are ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited. The Cat Cold Planers are designed for use on Cat Skid Steer Loaders, Multi Terrain Loaders, Compact Track Loaders, Compact Wheel Loaders and Backhoe Loaders.

360 View not available for this product.

Add to Cart

SPECIFICATION SUMMARY

Maximum Drum Width 30.0 in
Unit Weight 2315.0 lb
Tilt Angle Range +/- 6.5 Degrees
Drum Torque at Max Pressure 2746.0 ft-lb

PRICE (USD)

Call 800-637-5000 for rate information

Maximum Drum Width

30.0 in
Unit Weight

2315.0 lb
Tilt Angle Range +/-

6.5 Degrees
Drum Torque at Max Pressure

2746.0 ft-lb
Drum speed @ Max Flow

143.0 RPM
Hydraulic Flow Range

150 L/min (40 gal/min)
Hydraulic Pressure Range

280 bar (4000 psi)
Overall Width

73.0 in
Overall Height

43.0 in
Overall Length

50.0 in
Side Shift Travel

26.0 in
Conical Bits

60
Standard Bit Type

All Purpose
Maximum Cutting Depth

6.7 in
Working Width

29.5 in
Required Hydraulics

High Flow XHP
Overall Width

73.1 in
Overall Length

50 in
Overall Height

43.3 in
Weight

2314.9 lb
Optimal Hydraulic Flow

136-150 L/min (36-40 gpm)
Optimal Hydraulic Pressure

250-280 bar (3630-4000 psi)
Drum Speed

143 rpm
Optional Drum Widths/Depths

80/200-610/178 mm (3/8-24/7 in)
Tilt Angle Range +/-

6.5 degrees
Side Shift Travel

25.6 in

Application

Designed for small paving jobs in residential and commercial applications, and are primarily used to economically restore asphalt and concrete surfaces. Ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited.

Self-leveling Design

Self-leveling design automatically levels itself when placed on the ground for consistent depth control without operator adjustments and excellent spoil retention.

Two Wear-Resistant Skid Plates

Two wear-resistant skid plates remain parallel to the ground for optimum stability.

Hydraulic Sideshift

Hydraulic sideshift permits close planing to curbs, walls and other obstructions.

Independent Left/Right Depth Control

Independent left/right depth control allows maximum drum depths to be adjusted independently on each skid. Gauges are easily viewable from the cab. Independent depth control is mechanical on the PC104B and PC205B models; hydraulic independent depth control is standard on the PC305B-PC412B models.

Max Pro Pressure Gauge

Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on XHP models.

Direct Drive System

Direct drive system on the standard flow models features a variable speed, uni-directional, gerotor style hydraulic motor. Direct drive system on high flow and XHP models features a hydraulic radial piston motor to ensure maximum cutting rate and drum torque for optimal production performance and efficiency.

Float, Spring Tilt and Hydraulic Tilt

Float enables planers to follow the contour of the surface. Float is activated by a knob and is only available on high flow and XHP planers. Spring tilt and hydraulic tilt enable planers to oscillate for angled cuts. Tilt is hydraulically controlled on high flow models and spring controlled on standard flow planers.

Bits and Water Sprinkler

All Purpose concrete bits are standard. Optional concrete bits, extreme life bits and water sprinkler kits are available for all models.